• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Congrats Firehawk XP and Skywave!!!

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

Lonely Raven

If you traded with me please leave me Heatware Sen
Joined
Feb 2, 2002
Location
Wheaton, IL
You both broke the 5k mark today! Rock on!

I'm pushing as hard as I can for 10k myself, with the top 10
soon to follow!
 
OP
Lonely Raven

Lonely Raven

If you traded with me please leave me Heatware Sen
Joined
Feb 2, 2002
Location
Wheaton, IL
Firehawk, you have to tell us what your using to get that
MAD FSB on that XP!!

And please, tell me how it compairs to the P4.

I have a similar setup, I've just not been as lucky on the FSB
as you have!
 

Firehawk

Member
Joined
Mar 22, 2002
Location
Brazil
Thank you guys!
Raven, I think I can help ya. I use the KR7, bios 6N.
I change the original heatsink in the northbridge with an inexpensive K6-2 cooler, it work a lot better.
3,65v in I/O.
But the key is the ram. I´m using the Samsung PC2700 module, rated 166 cas2, but it does 175 cas2 and 205 cas2,5 with 4 way enabled, 1t command and all the good stuff. Just 2,75v and no warm. I have to rip off my Live after 191fsb :)
You can go to Samsung page and check for the module specs:
http://www.samsungelectronics.com/semiconductors/search/datasheet.jsp?family=157
You should look for B3 modules: they are great.
I´m note sure about the P4 times yet: I was wondering for a while now how the Northwood will perform, and soonest I can grab useful information I´ll spare with you guys. With good ram, looks like it will be close to my XP. I have to run the time unit on both yet.
Anyone knows how to do a voltage mod in P4S333 board? This thing is too cold for my taste!!!!