• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Defogger Repair Kit Volt Mod on TH7II

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
No I didn't take any pics because I figured there were already enough on the net. Basically all I did was orient myself so I knew which four holes on the socket I needed to connect, and then I slowly painted between them using a sewing needle. Just go slow and use some glasses to make sure you aren't getting too close to the neighboring holes. Oh and if you do screw up you can simply wipe it off with acetone and start over.
 
There is (was) a holy o/c pen that was floating around. PM the mods to find it. Talk to MR B. I think he may know.
 
I just noticed that this method got posted as a sticky. I did this a while back and it worked very well. It's a lot easier than wrapping the pins with wire, imho. Just thought I would give this a bump.
 
Back