do the abit kt7a and asus a7v133 come with agp dividor?

[eddoh]

thanks..cuz im not totally sure how my hercules geforce mx2 will run at high fsb....this is for a system im about to build thanks

 

[DaveB]

VIA KT133A mobos have 1/1, 2/3, and 1/2 AGP dividers.

 

[Monza]

dont fret though when sandra and other prgms tell u that ur dividers r still at 2/3 and 1/3 (agp and pci respect.), they dont understand the kt133a chipset yet. Go Vantec.

good luck,
monza

amd tbird [email protected] (7.5x133)
"New" Vantec cooler (gotta love that clip)
Asus a7v133 motherboard
256mb pc150 kingmax (2-2-2)
evga geforce2pro 32mb
maxtor 30g
40x cdrom
zip100
linksys 10/100 nic

 

[ojoey]

DaveB (Feb 22, 2001 12:02 p.m.):
VIA KT133A mobos have 1/1, 2/3, and 1/2 AGP dividers.

Where is the divider on the KT7A

 

[DaveB]

Sorry about the 1/1, it doesn't apply to the KT133 or KT133A chipsets since the minimum FSB is 100 MHz. The KT133 had a fixed 2/3 AGP divider, which was fine since it wouldn't run much over 110 MHz anyway. I would assume that the KT133A would automatically invoke the 1/2 divider as the FSB increases. Somewhere between 120 MHz and 124 MHz is the usual range for that. So you're not likely to find any setting for it.

 

[proze]

the board will automatically set agp to half and pci to 1/4 when the fsb gets too high. you can't change it manually..

 

[Monza]

it comes in at 120mhz dude.

monza

amd tbird [email protected] (7.5x133)
"New" Vantec cooler (gotta love that clip)
Asus a7v133 motherboard
256mb pc150 kingmax (2-2-2)
evga geforce2pro 32mb
maxtor 30g
40x cdrom
zip100
linksys 10/100 nic