• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

First time 6600k overclocking

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

yellowbanana

New Member
Joined
Dec 31, 2016
Hey I just want to make sure that i am not messing anything up. My multiplier is 45 using a vcore of 1.264V adaptive mode. I stress tested stability using AIDA64 extreme and there was no problems.

Should i try to lower the voltage abit or leave it as it is?

Thanks
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    474.1 KB · Views: 81

wingman99

Member
Joined
Dec 10, 2003
I use Adaptive also. You are doing fine, the voltage can go up to 1.44v and 90c for core temp.
 

trents

Senior Member
Joined
Dec 27, 2008
I would run AIDA64 for a longer time to ensure you are stable. Five hours anyway.
 

turbobooster196

Member
Joined
Jan 19, 2014
Location
holland
that is a good cooler, so you are fine if you whant to go higher.

but i would not do a stress test with adaptive voltaqe it goes way higher then it needs to go.
Just put in a manual voltage and run aida for a longer time, you will see that when you come to the fpu test things heat up a bit more.
If all stable then put it back on adaptive
 
Last edited: