fortron 350 and P4 setup......

[sandman001]

So, I'm going tog et a P4 setup, but I don't know if this sparkle/fortron 350watt will handle it.

Right now I'm looking at this:
Nvidia 5900NU vmodded
2.4C at somewhere over 3.3ghz
P4C800-deluxe
2x256mb Mushkin DDR 400
DVD-rom
Cd-RW
one 40 gig WD SE hard drive..

And lots of fans that will get powered off my second PSU, which I need to know which pins on the MB plug to short, does anyone know which ones to short?

 

[Iron Hawk]

If you want to turn on a PSU without it being attached to a motherboard you short the Green wire to one of the Ground wires (Black).

If you want to have both PSUs turn on with the computer there is a little bit more work involved. I recomend this guide:

http://pc-mod.com/articles/atx/

Im sure there are many more guides out there, they all say about the same thing.

 

[sandman001]

Naw, I'll just flip the little switch on back....thanks.

 

[Iron Hawk]

Alright, just dont forget, Id hate to have you forget to turn your fans on and have your system overheat or something.

 

[sandman001]

Yea, especially since I'm getting my Pelt stuff around.

 

[larva]

No, the 350 isn't big enough for your application. Get the 530 Fortron or the Antec True Power 430, 480, or 550.