• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

FSB on 759

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

Brolloks

Benching Senior on Siesta, Premium Member #8
Joined
Dec 26, 2006
Location
Land of Long Horns
Need more Vtt...below 4.5 Ghz if you get any instability it is ussually v-core or vtt
Also your VDIMM is way too low for your RAM speed and timings, 1.65 should do the trick

PS...when going for max FSB relax your timings on the RAM a bit, it helps
 
Last edited:

Brolloks

Benching Senior on Siesta, Premium Member #8
Joined
Dec 26, 2006
Location
Land of Long Horns
Select x16 on uncore (3568 Hz), take QPI speed off auto and select one that is just higher than uncore speeds
Bump VDIMM another notch
 
OP
Hardass

Hardass

Senior Member
Joined
Nov 3, 2001
Raised PCI to 105v gets to desktop but lose Internet device.
 
OP
Hardass

Hardass

Senior Member
Joined
Nov 3, 2001
PCI voltage set at 102v
 

Attachments

  • 226x18.jpg
    226x18.jpg
    170 KB · Views: 91

MIAHALLEN

Senior Member
Joined
Aug 29, 2007
Chuck, you should be able to get much higher with a healthy bump in the PCIe speed. Overclock the bus to 112-118MHz and see what happens ;)
 
OP
Hardass

Hardass

Senior Member
Joined
Nov 3, 2001
Thanks for the replies, will see what happens. At the setting above system locked up after 20mins of prime. What voltage needs increasing?