• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Gentoo says 1 core, I say 2

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

Shelnutt2

Overclockers Team Content Editor
Joined
Jun 17, 2005
Location
/home/
I've pushed my OC a bit further, memtest stable, and PCMark stable. Windows detects everything fine and dandy, I went to reboot back into Gentoo so I could fold again, and see if its really stable..but Gentoo is detecting only one core. Here is my kern.log file (from syslog-ng).

The intersting part:

Jan 27 07:29:55 localhost Memory: 1023016k/1047424k available (4238k kernel code, 24016k reserved, 2142k data, 324k init)
Jan 27 07:29:55 localhost Calibrating delay using timer specific routine.. 6869.39 BogoMIPS (lpj=13738783)
Jan 27 07:29:55 localhost Mount-cache hash table entries: 256
Jan 27 07:29:55 localhost CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 27 07:29:55 localhost CPU: L2 cache: 2048K
Jan 27 07:29:55 localhost CPU 0/0 -> Node 0
Jan 27 07:29:55 localhost using mwait in idle threads.
Jan 27 07:29:55 localhost CPU: Physical Processor ID: 0
Jan 27 07:29:55 localhost CPU: Processor Core ID: 0
Jan 27 07:29:55 localhost CPU0: Thermal monitoring enabled (TM2)
Jan 27 07:29:55 localhost SMP alternatives: switching to UP code
Jan 27 07:29:55 localhost ACPI: Core revision 20060707
Jan 27 07:29:55 localhost Using local APIC timer interrupts.
Jan 27 07:29:55 localhost result 30624968
Jan 27 07:29:55 localhost Detected 30.624 MHz APIC timer.
Jan 27 07:29:55 localhost SMP alternatives: switching to SMP code
Jan 27 07:29:55 localhost Booting processor 1/2 APIC 0x1
Jan 27 07:29:55 localhost Not responding.
Jan 27 07:29:55 localhost Inquiring remote APIC #1...
Jan 27 07:29:55 localhost ... APIC #1 ID: failed
Jan 27 07:29:55 localhost ... APIC #1 VERSION: failed
Jan 27 07:29:55 localhost ... APIC #1 SPIV: failed
Jan 27 07:29:55 localhost Brought up 1 CPUs

The rest:

Code:
Jan 27 07:29:55 localhost Linux version 2.6.20-gentoo-r8 ([email protected]) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #6 SMP Sun Dec 2 14:35:26 EST 2007
Jan 27 07:29:55 localhost Command line: root=/dev/sda7
Jan 27 07:29:55 localhost BIOS-provided physical RAM map:
Jan 27 07:29:55 localhost BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
Jan 27 07:29:55 localhost BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jan 27 07:29:55 localhost BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 27 07:29:55 localhost BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
Jan 27 07:29:55 localhost BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
Jan 27 07:29:55 localhost BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
Jan 27 07:29:55 localhost BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
Jan 27 07:29:55 localhost BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
Jan 27 07:29:55 localhost BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jan 27 07:29:55 localhost Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Jan 27 07:29:55 localhost Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
Jan 27 07:29:55 localhost end_pfn_map = 1048576
Jan 27 07:29:55 localhost DMI 2.4 present.
Jan 27 07:29:55 localhost ACPI: RSDP (v000 GBT                                   ) @ 0x00000000000f6c30
Jan 27 07:29:55 localhost ACPI: RSDT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000003fee3040
Jan 27 07:29:55 localhost ACPI: FADT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000003fee30c0
Jan 27 07:29:55 localhost ACPI: HPET (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x00000098) @ 0x000000003fee7e00
Jan 27 07:29:55 localhost ACPI: MCFG (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000003fee7e80
Jan 27 07:29:55 localhost ACPI: MADT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000003fee7d00
Jan 27 07:29:55 localhost ACPI: DSDT (v001 GBT    GBTUACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
Jan 27 07:29:55 localhost No NUMA configuration found
Jan 27 07:29:55 localhost Faking a node at 0000000000000000-000000003fee0000
Jan 27 07:29:55 localhost Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Jan 27 07:29:55 localhost Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
Jan 27 07:29:55 localhost Bootmem setup node 0 0000000000000000-000000003fee0000
Jan 27 07:29:55 localhost Zone PFN ranges:
Jan 27 07:29:55 localhost DMA             0 ->     4096
Jan 27 07:29:55 localhost DMA32        4096 ->  1048576
Jan 27 07:29:55 localhost Normal    1048576 ->  1048576
Jan 27 07:29:55 localhost early_node_map[2] active PFN ranges
Jan 27 07:29:55 localhost 0:        0 ->      158
Jan 27 07:29:55 localhost 0:      256 ->   261856
Jan 27 07:29:55 localhost On node 0 totalpages: 261758
Jan 27 07:29:55 localhost DMA zone: 56 pages used for memmap
Jan 27 07:29:55 localhost DMA zone: 1917 pages reserved
Jan 27 07:29:55 localhost DMA zone: 2025 pages, LIFO batch:0
Jan 27 07:29:55 localhost DMA32 zone: 3524 pages used for memmap
Jan 27 07:29:55 localhost DMA32 zone: 254236 pages, LIFO batch:31
Jan 27 07:29:55 localhost Normal zone: 0 pages used for memmap
Jan 27 07:29:55 localhost ACPI: PM-Timer IO Port: 0x408
Jan 27 07:29:55 localhost ACPI: Local APIC address 0xfee00000
Jan 27 07:29:55 localhost ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jan 27 07:29:55 localhost Processor #0 (Bootup-CPU)
Jan 27 07:29:55 localhost ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jan 27 07:29:55 localhost Processor #1
Jan 27 07:29:55 localhost ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
Jan 27 07:29:55 localhost ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
Jan 27 07:29:55 localhost ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Jan 27 07:29:55 localhost ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Jan 27 07:29:55 localhost ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Jan 27 07:29:55 localhost ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
Jan 27 07:29:55 localhost ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jan 27 07:29:55 localhost IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
Jan 27 07:29:55 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 27 07:29:55 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 27 07:29:55 localhost ACPI: IRQ0 used by override.
Jan 27 07:29:55 localhost ACPI: IRQ2 used by override.
Jan 27 07:29:55 localhost ACPI: IRQ9 used by override.
Jan 27 07:29:55 localhost Setting APIC routing to physical flat
Jan 27 07:29:55 localhost ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jan 27 07:29:55 localhost Using ACPI (MADT) for SMP configuration information
Jan 27 07:29:55 localhost Nosave address range: 000000000009e000 - 00000000000a0000
Jan 27 07:29:55 localhost Nosave address range: 00000000000a0000 - 00000000000f0000
Jan 27 07:29:55 localhost Nosave address range: 00000000000f0000 - 0000000000100000
Jan 27 07:29:55 localhost Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)
Jan 27 07:29:55 localhost SMP: Allowing 4 CPUs, 2 hotplug CPUs
Jan 27 07:29:55 localhost PERCPU: Allocating 36800 bytes of per cpu data
Jan 27 07:29:55 localhost Built 1 zonelists.  Total pages: 256261
Jan 27 07:29:55 localhost Kernel command line: root=/dev/sda7
Jan 27 07:29:55 localhost Initializing CPU#0
Jan 27 07:29:55 localhost PID hash table entries: 4096 (order: 12, 32768 bytes)
Jan 27 07:29:55 localhost Console: colour VGA+ 80x25
Jan 27 07:29:55 localhost Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jan 27 07:29:55 localhost Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Jan 27 07:29:55 localhost Checking aperture...
Jan 27 07:29:55 localhost Memory: 1023016k/1047424k available (4238k kernel code, 24016k reserved, 2142k data, 324k init)
Jan 27 07:29:55 localhost Calibrating delay using timer specific routine.. 6869.39 BogoMIPS (lpj=13738783)
Jan 27 07:29:55 localhost Mount-cache hash table entries: 256
Jan 27 07:29:55 localhost CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 27 07:29:55 localhost CPU: L2 cache: 2048K
Jan 27 07:29:55 localhost CPU 0/0 -> Node 0
Jan 27 07:29:55 localhost using mwait in idle threads.
Jan 27 07:29:55 localhost CPU: Physical Processor ID: 0
Jan 27 07:29:55 localhost CPU: Processor Core ID: 0
Jan 27 07:29:55 localhost CPU0: Thermal monitoring enabled (TM2)
Jan 27 07:29:55 localhost SMP alternatives: switching to UP code
Jan 27 07:29:55 localhost ACPI: Core revision 20060707
Jan 27 07:29:55 localhost Using local APIC timer interrupts.
Jan 27 07:29:55 localhost result 30624968
Jan 27 07:29:55 localhost Detected 30.624 MHz APIC timer.
Jan 27 07:29:55 localhost SMP alternatives: switching to SMP code
Jan 27 07:29:55 localhost Booting processor 1/2 APIC 0x1
Jan 27 07:29:55 localhost Not responding.
Jan 27 07:29:55 localhost Inquiring remote APIC #1...
Jan 27 07:29:55 localhost ... APIC #1 ID: failed
Jan 27 07:29:55 localhost ... APIC #1 VERSION: failed
Jan 27 07:29:55 localhost ... APIC #1 SPIV: failed
Jan 27 07:29:55 localhost Brought up 1 CPUs
Jan 27 07:29:55 localhost testing NMI watchdog ... OK.
Jan 27 07:29:55 localhost time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
Jan 27 07:29:55 localhost time.c: Detected 3429.996 MHz processor.
Jan 27 07:29:55 localhost NET: Registered protocol family 16
Jan 27 07:29:55 localhost ACPI: bus type pci registered
Jan 27 07:29:55 localhost PCI: Using MMCONFIG at f0000000
Jan 27 07:29:55 localhost ACPI: Interpreter enabled
Jan 27 07:29:55 localhost ACPI: Using IOAPIC for interrupt routing
Jan 27 07:29:55 localhost ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 27 07:29:55 localhost PCI: Probing PCI hardware (bus 00)
Jan 27 07:29:55 localhost Boot video device is 0000:01:00.0
Jan 27 07:29:55 localhost PCI: Transparent bridge - 0000:00:1e.0
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 27 07:29:55 localhost ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
Jan 27 07:29:55 localhost Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 27 07:29:55 localhost pnp: PnP ACPI init
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0A03
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0C02
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0200
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0103
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0B00
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0800
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0C04
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0700
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0501
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0400
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0C02
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0C02
Jan 27 07:29:55 localhost pnp: ACPI device : hid PNP0C01
Jan 27 07:29:55 localhost pnp: ACPI device : hid INT0800
Jan 27 07:29:55 localhost pnp: PnP ACPI: found 14 devices
Jan 27 07:29:55 localhost SCSI subsystem initialized
Jan 27 07:29:55 localhost libata version 2.00 loaded.
Jan 27 07:29:55 localhost usbcore: registered new interface driver usbfs
Jan 27 07:29:55 localhost usbcore: registered new interface driver hub
Jan 27 07:29:55 localhost usbcore: registered new device driver usb
Jan 27 07:29:55 localhost PCI: Using ACPI for IRQ routing
Jan 27 07:29:55 localhost PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jan 27 07:29:55 localhost PCI: Cannot allocate resource region 2 of device 0000:03:00.0
Jan 27 07:29:55 localhost PCI: Cannot allocate resource region 3 of device 0000:03:00.0
Jan 27 07:29:55 localhost hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Jan 27 07:29:55 localhost hpet0: 4 64-bit timers, 14318180 Hz
Jan 27 07:29:55 localhost PCI-GART: No AMD northbridge found.
Jan 27 07:29:55 localhost pnp: the driver 'system' has been registered
Jan 27 07:29:55 localhost pnp: match found with the PnP device '00:01' and the driver 'system'
Jan 27 07:29:55 localhost pnp: match found with the PnP device '00:0a' and the driver 'system'
Jan 27 07:29:55 localhost pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
Jan 27 07:29:55 localhost pnp: match found with the PnP device '00:0b' and the driver 'system'
Jan 27 07:29:55 localhost pnp: match found with the PnP device '00:0c' and the driver 'system'
Jan 27 07:29:55 localhost PCI: Bridge: 0000:00:01.0
Jan 27 07:29:55 localhost IO window: a000-afff
Jan 27 07:29:55 localhost MEM window: f4000000-f6ffffff
Jan 27 07:29:55 localhost PREFETCH window: e0000000-efffffff
Jan 27 07:29:55 localhost PCI: Bridge: 0000:00:1c.0
Jan 27 07:29:55 localhost IO window: 9000-9fff
Jan 27 07:29:55 localhost MEM window: disabled.
Jan 27 07:29:55 localhost PREFETCH window: disabled.
Jan 27 07:29:55 localhost PCI: Bridge: 0000:00:1c.3
Jan 27 07:29:55 localhost IO window: b000-bfff
Jan 27 07:29:55 localhost MEM window: f9000000-f90fffff
Jan 27 07:29:55 localhost PREFETCH window: disabled.
Jan 27 07:29:55 localhost PCI: Bridge: 0000:00:1c.4
Jan 27 07:29:55 localhost IO window: c000-cfff
Jan 27 07:29:55 localhost MEM window: f7000000-f8ffffff
Jan 27 07:29:55 localhost PREFETCH window: 40000000-400fffff
Jan 27 07:29:55 localhost PCI: Bridge: 0000:00:1e.0
Jan 27 07:29:55 localhost IO window: d000-dfff
Jan 27 07:29:55 localhost MEM window: disabled.
Jan 27 07:29:55 localhost PREFETCH window: disabled.
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1c.3 to 64
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1c.4 to 64
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jan 27 07:29:55 localhost NET: Registered protocol family 2
Jan 27 07:29:55 localhost IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Jan 27 07:29:55 localhost TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Jan 27 07:29:55 localhost TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 27 07:29:55 localhost TCP: Hash tables configured (established 131072 bind 65536)
Jan 27 07:29:55 localhost TCP reno registered
Jan 27 07:29:55 localhost IA-32 Microcode Update Driver: v1.14a <[email protected]>
Jan 27 07:29:55 localhost Total HugeTLB memory allocated, 0
Jan 27 07:29:55 localhost Installing knfsd (copyright (C) 1996 [email protected]).
Jan 27 07:29:55 localhost NTFS driver 2.1.28 [Flags: R/O].
Jan 27 07:29:55 localhost JFS: nTxBlock = 7992, nTxLock = 63938
Jan 27 07:29:55 localhost SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Jan 27 07:29:55 localhost SGI XFS Quota Management subsystem
Jan 27 07:29:55 localhost io scheduler noop registered
Jan 27 07:29:55 localhost io scheduler deadline registered
Jan 27 07:29:55 localhost io scheduler cfq registered (default)
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 27 07:29:55 localhost assign_interrupt_mode Found MSI capability
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:01.0:pcie00]
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:01.0:pcie03]
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jan 27 07:29:55 localhost assign_interrupt_mode Found MSI capability
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:1c.0:pcie00]
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:1c.0:pcie02]
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:1c.0:pcie03]
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1c.3 to 64
Jan 27 07:29:55 localhost assign_interrupt_mode Found MSI capability
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:1c.3:pcie00]
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:1c.3:pcie02]
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:1c.3:pcie03]
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1c.4 to 64
Jan 27 07:29:55 localhost assign_interrupt_mode Found MSI capability
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:1c.4:pcie00]
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:1c.4:pcie02]
Jan 27 07:29:55 localhost Allocate Port Service[0000:00:1c.4:pcie03]
Jan 27 07:29:55 localhost Initializing CPU#1
Jan 27 07:29:55 localhost Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 
Jan 27 07:29:55 localhost [<ffffffff80259ee1>] get_page_from_freelist+0x179/0x473
Jan 27 07:29:55 localhost PGD 0 
Jan 27 07:29:55 localhost Oops: 0000 [1] SMP 
Jan 27 07:29:55 localhost CPU 1 
Jan 27 07:29:55 localhost Modules linked in:
Jan 27 07:29:55 localhost Pid: 0, comm: swapper Not tainted 2.6.20-gentoo-r8 #6
Jan 27 07:29:55 localhost RIP: 0010:[<ffffffff80259ee1>]  [<ffffffff80259ee1>] get_page_from_freelist+0x179/0x473
Jan 27 07:29:55 localhost RSP: 0018:ffff81003f04fda8  EFLAGS: 00010046
Jan 27 07:29:55 localhost RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
Jan 27 07:29:55 localhost RDX: 0000000000000000 RSI: 00000000000004e7 RDI: ffff81000000b3c0
Jan 27 07:29:55 localhost RBP: 0000000000000046 R08: 0000000000000000 R09: 000000000003cfc9
Jan 27 07:29:55 localhost R10: 0000000000000000 R11: 0000000000000001 R12: ffff81000000b3c0
Jan 27 07:29:55 localhost R13: 0000000000000000 R14: 0000000000000000 R15: ffff81000000caa0
Jan 27 07:29:55 localhost FS:  0000000000000000(0000) GS:ffff81003f00cd40(0000) knlGS:0000000000000000
Jan 27 07:29:55 localhost CS:  0010 DS: 0018 ES: 0018 CR0: 0000000080050033
Jan 27 07:29:55 localhost CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000000a0
Jan 27 07:29:55 localhost Process swapper (pid: 0, threadinfo ffff81003f04e000, task ffff81003f022080)
Jan 27 07:29:55 localhost Stack:  0000004400000000 0002002000000000 ffff81000000caa8 0000000100000000
Jan 27 07:29:55 localhost 0000000000000000 00000000802324df 0000000000000000 0000000000000001
Jan 27 07:29:55 localhost ffff81003f04fdf8 0000000000000000 0000000000000020 ffff81000000caa0
Jan 27 07:29:55 localhost Call Trace:
Jan 27 07:29:55 localhost [<ffffffff8025a340>] __alloc_pages+0x61/0x2b5
Jan 27 07:29:55 localhost [<ffffffff8026ec4a>] alloc_page_interleave+0x40/0x83
Jan 27 07:29:55 localhost [<ffffffff80259d0f>] __get_free_pages+0xe/0x33
Jan 27 07:29:55 localhost [<ffffffff802102da>] cpu_init+0x129/0x30b
Jan 27 07:29:55 localhost [<ffffffff802180e2>] start_secondary+0x13/0x479
Jan 27 07:29:55 localhost 
Jan 27 07:29:55 localhost 
Jan 27 07:29:55 localhost Code: 83 3b 00 75 6d 48 63 43 08 49 8d bc 24 50 01 00 00 45 31 ed 
Jan 27 07:29:55 localhost RIP  [<ffffffff80259ee1>] get_page_from_freelist+0x179/0x473
Jan 27 07:29:55 localhost RSP <ffff81003f04fda8>
Jan 27 07:29:55 localhost CR2: 0000000000000000
Jan 27 07:29:55 localhost <0>Kernel panic - not syncing: Attempted to kill the idle task!
Jan 27 07:29:55 localhost <6>Real Time Clock Driver v1.12ac
Jan 27 07:29:55 localhost hpet_resources: 0xfed00000 is busy
Jan 27 07:29:55 localhost Linux agpgart interface v0.101 (c) Dave Jones
Jan 27 07:29:55 localhost input: Power Button (FF) as /class/input/input0
Jan 27 07:29:55 localhost ACPI: Power Button (FF) [PWRF]
Jan 27 07:29:55 localhost input: Power Button (CM) as /class/input/input1
Jan 27 07:29:55 localhost ACPI: Power Button (CM) [PWRB]
Jan 27 07:29:55 localhost ACPI: Processor [CPU0] (supports 8 throttling states)
Jan 27 07:29:55 localhost ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Jan 27 07:29:55 localhost ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Jan 27 07:29:55 localhost ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Jan 27 07:29:55 localhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jan 27 07:29:55 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 27 07:29:55 localhost pnp: the driver 'serial' has been registered
Jan 27 07:29:55 localhost pnp: match found with the PnP device '00:08' and the driver 'serial'
Jan 27 07:29:55 localhost 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 27 07:29:55 localhost Floppy drive(s): fd0 is 1.44M
Jan 27 07:29:55 localhost FDC 0 is a post-1991 82077
Jan 27 07:29:55 localhost RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jan 27 07:29:55 localhost loop: loaded (max 8 devices)
Jan 27 07:29:55 localhost Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
Jan 27 07:29:55 localhost Copyright (c) 1999-2006 Intel Corporation.
Jan 27 07:29:55 localhost e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
Jan 27 07:29:55 localhost e100: Copyright(c) 1999-2006 Intel Corporation
Jan 27 07:29:55 localhost forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
Jan 27 07:29:55 localhost tun: Universal TUN/TAP device driver, 1.6
Jan 27 07:29:55 localhost tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Jan 27 07:29:55 localhost r8169 Gigabit Ethernet driver 2.2LK loaded
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:04:00.0 to 64
Jan 27 07:29:55 localhost eth0: RTL8168b/8111b at 0xffffc20000006000, 00:1a:4d:47:2a:6b, IRQ 16
Jan 27 07:29:55 localhost netconsole: not configured, aborting
Jan 27 07:29:55 localhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 27 07:29:55 localhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 27 07:29:55 localhost JMB363: IDE controller at PCI slot 0000:03:00.0
Jan 27 07:29:55 localhost PCI: Device 0000:03:00.0 not available because of resource collisions
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
Jan 27 07:29:55 localhost JMB363: BIOS configuration fixed.
Jan 27 07:29:55 localhost JMB363: chipset revision 2
Jan 27 07:29:55 localhost JMB363: 100% native mode on irq 19
Jan 27 07:29:55 localhost JMB363: dma_base is invalid
Jan 27 07:29:55 localhost ide0: JMB363 Bus-Master DMA disabled (BIOS)
Jan 27 07:29:55 localhost JMB363: dma_base is invalid
Jan 27 07:29:55 localhost ide1: JMB363 Bus-Master DMA disabled (BIOS)
Jan 27 07:29:55 localhost Probing IDE interface ide0...
Jan 27 07:29:55 localhost Probing IDE interface ide1...
Jan 27 07:29:55 localhost JMB363: IDE controller at PCI slot 0000:03:00.1
Jan 27 07:29:55 localhost PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:29:55 localhost JMB363: chipset revision 2
Jan 27 07:29:55 localhost JMB363: 100% native mode on irq 16
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:03:00.1 to 64
Jan 27 07:29:55 localhost ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:DMA
Jan 27 07:29:55 localhost ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:pio, hdh:pio
Jan 27 07:29:55 localhost Probing IDE interface ide2...
Jan 27 07:29:55 localhost hdf: 16X8 DVD DUAL, ATAPI CD/DVD-ROM drive
Jan 27 07:29:55 localhost hdf: hw_config=0000
Jan 27 07:29:55 localhost hdf: hw_config=0000
Jan 27 07:29:55 localhost ide2 at 0xb000-0xb007,0xb102 on irq 16
Jan 27 07:29:55 localhost Probing IDE interface ide3...
Jan 27 07:29:55 localhost Probing IDE interface ide0...
Jan 27 07:29:55 localhost Probing IDE interface ide1...
Jan 27 07:29:55 localhost Probing IDE interface ide3...
Jan 27 07:29:55 localhost hdf: ATAPI 126X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache<6>hdf: hw_config=0000
Jan 27 07:29:55 localhost , UDMA(66)
Jan 27 07:29:55 localhost Uniform CD-ROM driver Revision: 3.20
Jan 27 07:29:55 localhost megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
Jan 27 07:29:55 localhost megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
Jan 27 07:29:55 localhost megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
Jan 27 07:29:55 localhost ahci 0000:00:1f.2: version 2.0
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jan 27 07:29:55 localhost ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
Jan 27 07:29:55 localhost ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part 
Jan 27 07:29:55 localhost ata1: SATA max UDMA/133 cmd 0xFFFFC20000012100 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:29:55 localhost ata2: SATA max UDMA/133 cmd 0xFFFFC20000012180 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:29:55 localhost ata3: SATA max UDMA/133 cmd 0xFFFFC20000012200 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:29:55 localhost ata4: SATA max UDMA/133 cmd 0xFFFFC20000012280 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:29:55 localhost ata5: SATA max UDMA/133 cmd 0xFFFFC20000012300 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:29:55 localhost ata6: SATA max UDMA/133 cmd 0xFFFFC20000012380 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:29:55 localhost scsi0 : ahci
Jan 27 07:29:55 localhost ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 27 07:29:55 localhost ata1.00: ATA-7, max UDMA/133, 488395055 sectors: LBA48 NCQ (depth 31/32)
Jan 27 07:29:55 localhost ata1.00: ata1: dev 0 multi count 0
Jan 27 07:29:55 localhost ata1.00: configured for UDMA/133
Jan 27 07:29:55 localhost scsi1 : ahci
Jan 27 07:29:55 localhost ata2: SATA link down (SStatus 0 SControl 300)
Jan 27 07:29:55 localhost scsi2 : ahci
Jan 27 07:29:55 localhost ata3: SATA link down (SStatus 0 SControl 300)
Jan 27 07:29:55 localhost scsi3 : ahci
Jan 27 07:29:55 localhost ata4: SATA link down (SStatus 0 SControl 300)
Jan 27 07:29:55 localhost scsi4 : ahci
Jan 27 07:29:55 localhost ata5: SATA link down (SStatus 0 SControl 300)
Jan 27 07:29:55 localhost scsi5 : ahci
Jan 27 07:29:55 localhost ata6: SATA link down (SStatus 0 SControl 300)
Jan 27 07:29:55 localhost scsi 0:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
Jan 27 07:29:55 localhost SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
Jan 27 07:29:55 localhost sda: Write Protect is off
Jan 27 07:29:55 localhost sda: Mode Sense: 00 3a 00 00
Jan 27 07:29:55 localhost SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 27 07:29:55 localhost SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
Jan 27 07:29:55 localhost sda: Write Protect is off
Jan 27 07:29:55 localhost sda: Mode Sense: 00 3a 00 00
Jan 27 07:29:55 localhost SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 27 07:29:55 localhost sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
Jan 27 07:29:55 localhost sd 0:0:0:0: Attached scsi disk sda
Jan 27 07:29:55 localhost sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 27 07:29:55 localhost Fusion MPT base driver 3.04.03
Jan 27 07:29:55 localhost Copyright (c) 1999-2007 LSI Logic Corporation
Jan 27 07:29:55 localhost Fusion MPT SPI Host driver 3.04.03
Jan 27 07:29:55 localhost Fusion MPT SAS Host driver 3.04.03
Jan 27 07:29:55 localhost ieee1394: raw1394: /dev/raw1394 device initialized
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1a.7 to 64
Jan 27 07:29:55 localhost ehci_hcd 0000:00:1a.7: EHCI Host Controller
Jan 27 07:29:55 localhost ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jan 27 07:29:55 localhost PCI: cache line size of 32 is not supported by device 0000:00:1a.7
Jan 27 07:29:55 localhost ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9100000
Jan 27 07:29:55 localhost ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 27 07:29:55 localhost usb usb1: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost hub 1-0:1.0: USB hub found
Jan 27 07:29:55 localhost hub 1-0:1.0: 6 ports detected
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jan 27 07:29:55 localhost ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jan 27 07:29:55 localhost ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Jan 27 07:29:55 localhost PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jan 27 07:29:55 localhost ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9101000
Jan 27 07:29:55 localhost ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 27 07:29:55 localhost usb usb2: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost hub 2-0:1.0: USB hub found
Jan 27 07:29:55 localhost hub 2-0:1.0: 6 ports detected
Jan 27 07:29:55 localhost ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Jan 27 07:29:55 localhost USB Universal Host Controller Interface driver v3.0
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1a.0 to 64
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
Jan 27 07:29:55 localhost usb usb3: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost hub 3-0:1.0: USB hub found
Jan 27 07:29:55 localhost hub 3-0:1.0: 2 ports detected
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1a.1 to 64
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
Jan 27 07:29:55 localhost usb usb4: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost hub 4-0:1.0: USB hub found
Jan 27 07:29:55 localhost hub 4-0:1.0: 2 ports detected
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1a.2 to 64
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1a.2: UHCI Host Controller
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
Jan 27 07:29:55 localhost usb usb5: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost hub 5-0:1.0: USB hub found
Jan 27 07:29:55 localhost hub 5-0:1.0: 2 ports detected
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
Jan 27 07:29:55 localhost usb usb6: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost hub 6-0:1.0: USB hub found
Jan 27 07:29:55 localhost hub 6-0:1.0: 2 ports detected
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
Jan 27 07:29:55 localhost usb usb7: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost hub 7-0:1.0: USB hub found
Jan 27 07:29:55 localhost hub 7-0:1.0: 2 ports detected
Jan 27 07:29:55 localhost usb 1-4: new high speed USB device using ehci_hcd and address 4
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Jan 27 07:29:55 localhost uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
Jan 27 07:29:55 localhost usb usb8: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost hub 8-0:1.0: USB hub found
Jan 27 07:29:55 localhost hub 8-0:1.0: 2 ports detected
Jan 27 07:29:55 localhost usb 1-4: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost usb 3-2: new low speed USB device using uhci_hcd and address 2
Jan 27 07:29:55 localhost usb 3-2: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost usb 4-1: new full speed USB device using uhci_hcd and address 2
Jan 27 07:29:55 localhost usb 4-1: configuration #1 chosen from 1 choice
Jan 27 07:29:55 localhost drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10A2
Jan 27 07:29:55 localhost usbcore: registered new interface driver usblp
Jan 27 07:29:55 localhost drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jan 27 07:29:55 localhost Initializing USB Mass Storage driver...
Jan 27 07:29:55 localhost usbcore: registered new interface driver usb-storage
Jan 27 07:29:55 localhost USB Mass Storage support registered.
Jan 27 07:29:55 localhost HID device not claimed by input or hiddev
Jan 27 07:29:55 localhost input: Logitech USB Receiver as /class/input/input2
Jan 27 07:29:55 localhost input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-1
Jan 27 07:29:55 localhost input: Logitech USB Receiver as /class/input/input3
Jan 27 07:29:55 localhost input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1
Jan 27 07:29:55 localhost usbcore: registered new interface driver usbhid
Jan 27 07:29:55 localhost drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan 27 07:29:55 localhost pnp: the driver 'i8042 kbd' has been registered
Jan 27 07:29:55 localhost pnp: the driver 'i8042 aux' has been registered
Jan 27 07:29:55 localhost pnp: the driver 'i8042 kbd' has been unregistered
Jan 27 07:29:55 localhost pnp: the driver 'i8042 aux' has been unregistered
Jan 27 07:29:55 localhost PNP: No PS/2 controller found. Probing ports directly.
Jan 27 07:29:55 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 27 07:29:55 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 27 07:29:55 localhost mice: PS/2 mouse device common for all mice
Jan 27 07:29:55 localhost device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
Jan 27 07:29:55 localhost Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
Jan 27 07:29:55 localhost Audigy2 value: Special config.
Jan 27 07:29:55 localhost ALSA device list:
Jan 27 07:29:55 localhost #0: Audigy 2 Value [SB0400] (rev.0, serial:0x10011102) at 0xd000, irq 18
Jan 27 07:29:55 localhost oprofile: using NMI interrupt.
Jan 27 07:29:55 localhost IPv4 over IPv4 tunneling driver
Jan 27 07:29:55 localhost TCP cubic registered
Jan 27 07:29:55 localhost NET: Registered protocol family 1
Jan 27 07:29:55 localhost NET: Registered protocol family 10
Jan 27 07:29:55 localhost IPv6 over IPv4 tunneling driver
Jan 27 07:29:55 localhost NET: Registered protocol family 17
Jan 27 07:29:55 localhost 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
Jan 27 07:29:55 localhost All bugs added by David S. Miller <[email protected]>
Jan 27 07:29:55 localhost ACPI: (supports S0 S3 S4 S5)
Jan 27 07:29:55 localhost ReiserFS: sda7: found reiserfs format "3.6" with standard journal
Jan 27 07:29:55 localhost ReiserFS: sda7: using ordered data mode
Jan 27 07:29:55 localhost ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Jan 27 07:29:55 localhost ReiserFS: sda7: checking transaction log (sda7)
Jan 27 07:29:55 localhost ReiserFS: sda7: journal-1153: found in header: first_unflushed_offset 1216, last_flushed_trans_id 1616970
Jan 27 07:29:55 localhost ReiserFS: sda7: journal-1006: found valid transaction start offset 1216, len 5 id 1615752
Jan 27 07:29:55 localhost ReiserFS: sda7: journal-1206: Starting replay from offset 1216, trans_id 1616971
Jan 27 07:29:55 localhost ReiserFS: sda7: journal-1037: journal_read_transaction, offset 1216, len 5 mount_id 221
Jan 27 07:29:55 localhost ReiserFS: sda7: journal-1039: journal_read_trans skipping because 1216 is too old
Jan 27 07:29:55 localhost ReiserFS: sda7: journal-1299: Setting newest_mount_id to 224
Jan 27 07:29:55 localhost ReiserFS: sda7: Using r5 hash to sort names
Jan 27 07:29:55 localhost VFS: Mounted root (reiserfs filesystem) readonly.
Jan 27 07:29:55 localhost Freeing unused kernel memory: 324k freed
Jan 27 07:29:55 localhost i2c /dev entries driver
Jan 27 07:29:55 localhost nvidia: module license 'NVIDIA' taints kernel.
Jan 27 07:29:55 localhost ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:29:55 localhost PCI: Setting latency timer of device 0000:01:00.0 to 64
Jan 27 07:29:55 localhost NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
Jan 27 07:29:55 localhost kjournald starting.  Commit interval 5 seconds
Jan 27 07:29:55 localhost EXT3 FS on sda6, internal journal
Jan 27 07:29:55 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jan 27 07:29:55 localhost kjournald starting.  Commit interval 5 seconds
Jan 27 07:29:55 localhost EXT3 FS on sda4, internal journal
Jan 27 07:29:55 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jan 27 07:29:55 localhost fuse init (API version 7.8)
Jan 27 07:29:55 localhost fuse distribution version: 2.7.0
Jan 27 07:29:55 localhost Adding 2441840k swap on /dev/sda5.  Priority:-1 extents:1 across:2441840k
Jan 27 07:29:55 localhost r8169: eth0: link up
Jan 27 07:29:55 localhost r8169: eth0: link up
Jan 27 07:29:55 localhost device eth0 entered promiscuous mode
Jan 27 07:29:55 localhost br0: port 1(eth0) entering learning state
Jan 27 07:29:55 localhost br0: topology change detected, propagating
Jan 27 07:29:55 localhost br0: port 1(eth0) entering forwarding state
Jan 27 07:29:55 localhost eth0: no IPv6 routers present
Jan 27 07:29:55 localhost br0: no IPv6 routers present
Jan 27 07:29:55 localhost ata1: D2H reg with I during NCQ, this message won't be printed again
Jan 27 07:29:55 localhost hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request.
Jan 27 07:30:37 localhost hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request.
Jan 27 07:32:00 localhost nfsd: last server has exited
Jan 27 07:32:00 localhost nfsd: unexporting all filesystems
Jan 27 07:32:01 localhost br0: port 1(eth0) entering disabled state
Jan 27 07:32:01 localhost device eth0 left promiscuous mode
Jan 27 07:32:01 localhost br0: port 1(eth0) entering disabled state
Jan 27 07:33:02 localhost Linux version 2.6.20-gentoo-r8 ([email protected]) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #6 SMP Sun Dec 2 14:35:26 EST 2007
Jan 27 07:33:02 localhost Command line: root=/dev/sda7
Jan 27 07:33:02 localhost BIOS-provided physical RAM map:
Jan 27 07:33:02 localhost BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
Jan 27 07:33:02 localhost BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jan 27 07:33:02 localhost BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 27 07:33:02 localhost BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
Jan 27 07:33:02 localhost BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
Jan 27 07:33:02 localhost BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
Jan 27 07:33:02 localhost BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
Jan 27 07:33:02 localhost BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
Jan 27 07:33:02 localhost BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jan 27 07:33:02 localhost Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Jan 27 07:33:02 localhost Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
Jan 27 07:33:02 localhost end_pfn_map = 1048576
Jan 27 07:33:02 localhost DMI 2.4 present.
Jan 27 07:33:02 localhost ACPI: RSDP (v000 GBT                                   ) @ 0x00000000000f6c30
Jan 27 07:33:02 localhost ACPI: RSDT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000003fee3040
Jan 27 07:33:02 localhost ACPI: FADT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000003fee30c0
Jan 27 07:33:02 localhost ACPI: HPET (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x00000098) @ 0x000000003fee7e00
Jan 27 07:33:02 localhost ACPI: MCFG (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000003fee7e80
Jan 27 07:33:02 localhost ACPI: MADT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000003fee7d00
Jan 27 07:33:02 localhost ACPI: DSDT (v001 GBT    GBTUACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
Jan 27 07:33:02 localhost No NUMA configuration found
Jan 27 07:33:02 localhost Faking a node at 0000000000000000-000000003fee0000
Jan 27 07:33:02 localhost Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Jan 27 07:33:02 localhost Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
Jan 27 07:33:02 localhost Bootmem setup node 0 0000000000000000-000000003fee0000
Jan 27 07:33:02 localhost Zone PFN ranges:
Jan 27 07:33:02 localhost DMA             0 ->     4096
Jan 27 07:33:02 localhost DMA32        4096 ->  1048576
Jan 27 07:33:02 localhost Normal    1048576 ->  1048576
Jan 27 07:33:02 localhost early_node_map[2] active PFN ranges
Jan 27 07:33:02 localhost 0:        0 ->      158
Jan 27 07:33:02 localhost 0:      256 ->   261856
Jan 27 07:33:02 localhost On node 0 totalpages: 261758
Jan 27 07:33:02 localhost DMA zone: 56 pages used for memmap
Jan 27 07:33:02 localhost DMA zone: 1917 pages reserved
Jan 27 07:33:02 localhost DMA zone: 2025 pages, LIFO batch:0
Jan 27 07:33:02 localhost DMA32 zone: 3524 pages used for memmap
Jan 27 07:33:02 localhost DMA32 zone: 254236 pages, LIFO batch:31
Jan 27 07:33:02 localhost Normal zone: 0 pages used for memmap
Jan 27 07:33:02 localhost ACPI: PM-Timer IO Port: 0x408
Jan 27 07:33:02 localhost ACPI: Local APIC address 0xfee00000
Jan 27 07:33:02 localhost ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jan 27 07:33:02 localhost Processor #0 (Bootup-CPU)
Jan 27 07:33:02 localhost ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jan 27 07:33:02 localhost Processor #1
Jan 27 07:33:02 localhost ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
Jan 27 07:33:02 localhost ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
Jan 27 07:33:02 localhost ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Jan 27 07:33:02 localhost ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Jan 27 07:33:02 localhost ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Jan 27 07:33:02 localhost ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
Jan 27 07:33:02 localhost ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jan 27 07:33:02 localhost IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
Jan 27 07:33:02 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 27 07:33:02 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 27 07:33:02 localhost ACPI: IRQ0 used by override.
Jan 27 07:33:02 localhost ACPI: IRQ2 used by override.
Jan 27 07:33:02 localhost ACPI: IRQ9 used by override.
Jan 27 07:33:02 localhost Setting APIC routing to physical flat
Jan 27 07:33:02 localhost ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jan 27 07:33:02 localhost Using ACPI (MADT) for SMP configuration information
Jan 27 07:33:02 localhost Nosave address range: 000000000009e000 - 00000000000a0000
Jan 27 07:33:02 localhost Nosave address range: 00000000000a0000 - 00000000000f0000
Jan 27 07:33:02 localhost Nosave address range: 00000000000f0000 - 0000000000100000
Jan 27 07:33:02 localhost Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)
Jan 27 07:33:02 localhost SMP: Allowing 4 CPUs, 2 hotplug CPUs
Jan 27 07:33:02 localhost PERCPU: Allocating 36800 bytes of per cpu data
Jan 27 07:33:02 localhost Built 1 zonelists.  Total pages: 256261
Jan 27 07:33:02 localhost Kernel command line: root=/dev/sda7
Jan 27 07:33:02 localhost Initializing CPU#0
Jan 27 07:33:02 localhost PID hash table entries: 4096 (order: 12, 32768 bytes)
Jan 27 07:33:02 localhost Console: colour VGA+ 80x25
Jan 27 07:33:02 localhost Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jan 27 07:33:02 localhost Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Jan 27 07:33:02 localhost Checking aperture...
Jan 27 07:33:02 localhost Memory: 1023016k/1047424k available (4238k kernel code, 24016k reserved, 2142k data, 324k init)
Jan 27 07:33:02 localhost Calibrating delay using timer specific routine.. 6869.33 BogoMIPS (lpj=13738675)
Jan 27 07:33:02 localhost Mount-cache hash table entries: 256
Jan 27 07:33:02 localhost CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 27 07:33:02 localhost CPU: L2 cache: 2048K
Jan 27 07:33:02 localhost CPU 0/0 -> Node 0
Jan 27 07:33:02 localhost using mwait in idle threads.
Jan 27 07:33:02 localhost CPU: Physical Processor ID: 0
Jan 27 07:33:02 localhost CPU: Processor Core ID: 0
Jan 27 07:33:02 localhost CPU0: Thermal monitoring enabled (TM2)
Jan 27 07:33:02 localhost SMP alternatives: switching to UP code
Jan 27 07:33:02 localhost ACPI: Core revision 20060707
Jan 27 07:33:02 localhost Using local APIC timer interrupts.
Jan 27 07:33:02 localhost result 30625028
Jan 27 07:33:02 localhost Detected 30.625 MHz APIC timer.
Jan 27 07:33:02 localhost SMP alternatives: switching to SMP code
Jan 27 07:33:02 localhost Booting processor 1/2 APIC 0x1
Jan 27 07:33:02 localhost Not responding.
Jan 27 07:33:02 localhost Inquiring remote APIC #1...
Jan 27 07:33:02 localhost ... APIC #1 ID: failed
Jan 27 07:33:02 localhost ... APIC #1 VERSION: failed
Jan 27 07:33:02 localhost ... APIC #1 SPIV: failed
Jan 27 07:33:02 localhost Brought up 1 CPUs
Jan 27 07:33:02 localhost testing NMI watchdog ... OK.
Jan 27 07:33:02 localhost time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
Jan 27 07:33:02 localhost time.c: Detected 3430.002 MHz processor.
Jan 27 07:33:02 localhost NET: Registered protocol family 16
Jan 27 07:33:02 localhost ACPI: bus type pci registered
Jan 27 07:33:02 localhost PCI: Using MMCONFIG at f0000000
Jan 27 07:33:02 localhost ACPI: Interpreter enabled
Jan 27 07:33:02 localhost ACPI: Using IOAPIC for interrupt routing
Jan 27 07:33:02 localhost ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 27 07:33:02 localhost PCI: Probing PCI hardware (bus 00)
Jan 27 07:33:02 localhost Boot video device is 0000:01:00.0
Jan 27 07:33:02 localhost PCI: Transparent bridge - 0000:00:1e.0
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 27 07:33:02 localhost ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
Jan 27 07:33:02 localhost Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 27 07:33:02 localhost pnp: PnP ACPI init
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0A03
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0C02
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0200
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0103
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0B00
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0800
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0C04
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0700
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0501
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0400
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0C02
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0C02
Jan 27 07:33:02 localhost pnp: ACPI device : hid PNP0C01
Jan 27 07:33:02 localhost pnp: ACPI device : hid INT0800
Jan 27 07:33:02 localhost pnp: PnP ACPI: found 14 devices
Jan 27 07:33:02 localhost SCSI subsystem initialized
Jan 27 07:33:02 localhost libata version 2.00 loaded.
Jan 27 07:33:02 localhost usbcore: registered new interface driver usbfs
Jan 27 07:33:02 localhost usbcore: registered new interface driver hub
Jan 27 07:33:02 localhost usbcore: registered new device driver usb
Jan 27 07:33:02 localhost PCI: Using ACPI for IRQ routing
Jan 27 07:33:02 localhost PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jan 27 07:33:02 localhost PCI: Cannot allocate resource region 2 of device 0000:03:00.0
Jan 27 07:33:02 localhost PCI: Cannot allocate resource region 3 of device 0000:03:00.0
Jan 27 07:33:02 localhost hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Jan 27 07:33:02 localhost hpet0: 4 64-bit timers, 14318180 Hz
Jan 27 07:33:02 localhost PCI-GART: No AMD northbridge found.
Jan 27 07:33:02 localhost pnp: the driver 'system' has been registered
Jan 27 07:33:02 localhost pnp: match found with the PnP device '00:01' and the driver 'system'
Jan 27 07:33:02 localhost pnp: match found with the PnP device '00:0a' and the driver 'system'
Jan 27 07:33:02 localhost pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
Jan 27 07:33:02 localhost pnp: match found with the PnP device '00:0b' and the driver 'system'
Jan 27 07:33:02 localhost pnp: match found with the PnP device '00:0c' and the driver 'system'
Jan 27 07:33:02 localhost PCI: Bridge: 0000:00:01.0
Jan 27 07:33:02 localhost IO window: a000-afff
Jan 27 07:33:02 localhost MEM window: f4000000-f6ffffff
Jan 27 07:33:02 localhost PREFETCH window: e0000000-efffffff
Jan 27 07:33:02 localhost PCI: Bridge: 0000:00:1c.0
Jan 27 07:33:02 localhost IO window: 9000-9fff
Jan 27 07:33:02 localhost MEM window: disabled.
Jan 27 07:33:02 localhost PREFETCH window: disabled.
Jan 27 07:33:02 localhost PCI: Bridge: 0000:00:1c.3
Jan 27 07:33:02 localhost IO window: b000-bfff
Jan 27 07:33:02 localhost MEM window: f9000000-f90fffff
Jan 27 07:33:02 localhost PREFETCH window: disabled.
Jan 27 07:33:02 localhost PCI: Bridge: 0000:00:1c.4
Jan 27 07:33:02 localhost IO window: c000-cfff
Jan 27 07:33:02 localhost MEM window: f7000000-f8ffffff
Jan 27 07:33:02 localhost PREFETCH window: 40000000-400fffff
Jan 27 07:33:02 localhost PCI: Bridge: 0000:00:1e.0
Jan 27 07:33:02 localhost IO window: d000-dfff
Jan 27 07:33:02 localhost MEM window: disabled.
Jan 27 07:33:02 localhost PREFETCH window: disabled.
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1c.3 to 64
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1c.4 to 64
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jan 27 07:33:02 localhost NET: Registered protocol family 2
Jan 27 07:33:02 localhost IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Jan 27 07:33:02 localhost TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Jan 27 07:33:02 localhost TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 27 07:33:02 localhost TCP: Hash tables configured (established 131072 bind 65536)
Jan 27 07:33:02 localhost TCP reno registered
Jan 27 07:33:02 localhost IA-32 Microcode Update Driver: v1.14a <[email protected]>
Jan 27 07:33:02 localhost Total HugeTLB memory allocated, 0
Jan 27 07:33:02 localhost Installing knfsd (copyright (C) 1996 [email protected]).
Jan 27 07:33:02 localhost NTFS driver 2.1.28 [Flags: R/O].
Jan 27 07:33:02 localhost JFS: nTxBlock = 7992, nTxLock = 63938
Jan 27 07:33:02 localhost SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Jan 27 07:33:02 localhost SGI XFS Quota Management subsystem
Jan 27 07:33:02 localhost io scheduler noop registered
Jan 27 07:33:02 localhost io scheduler deadline registered
Jan 27 07:33:02 localhost io scheduler cfq registered (default)
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 27 07:33:02 localhost assign_interrupt_mode Found MSI capability
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:01.0:pcie00]
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:01.0:pcie03]
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jan 27 07:33:02 localhost assign_interrupt_mode Found MSI capability
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:1c.0:pcie00]
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:1c.0:pcie02]
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:1c.0:pcie03]
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1c.3 to 64
Jan 27 07:33:02 localhost assign_interrupt_mode Found MSI capability
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:1c.3:pcie00]
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:1c.3:pcie02]
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:1c.3:pcie03]
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1c.4 to 64
Jan 27 07:33:02 localhost assign_interrupt_mode Found MSI capability
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:1c.4:pcie00]
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:1c.4:pcie02]
Jan 27 07:33:02 localhost Allocate Port Service[0000:00:1c.4:pcie03]
Jan 27 07:33:02 localhost Initializing CPU#1
Jan 27 07:33:02 localhost Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 
Jan 27 07:33:02 localhost [<ffffffff80259ee1>] get_page_from_freelist+0x179/0x473
Jan 27 07:33:02 localhost PGD 0 
Jan 27 07:33:02 localhost Oops: 0000 [1] SMP 
Jan 27 07:33:02 localhost CPU 1 
Jan 27 07:33:02 localhost Modules linked in:
Jan 27 07:33:02 localhost Pid: 0, comm: swapper Not tainted 2.6.20-gentoo-r8 #6
Jan 27 07:33:02 localhost RIP: 0010:[<ffffffff80259ee1>]  [<ffffffff80259ee1>] get_page_from_freelist+0x179/0x473
Jan 27 07:33:02 localhost RSP: 0018:ffff81003f04fda8  EFLAGS: 00010046
Jan 27 07:33:02 localhost RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
Jan 27 07:33:02 localhost RDX: 0000000000000000 RSI: 00000000000004e7 RDI: ffff81000000b3c0
Jan 27 07:33:02 localhost RBP: 0000000000000046 R08: 0000000000000000 R09: 000000000003d091
Jan 27 07:33:02 localhost R10: 0000000000000000 R11: 0000000000000001 R12: ffff81000000b3c0
Jan 27 07:33:02 localhost R13: 0000000000000000 R14: 0000000000000000 R15: ffff81000000caa0
Jan 27 07:33:02 localhost FS:  0000000000000000(0000) GS:ffff81003f00cd40(0000) knlGS:0000000000000000
Jan 27 07:33:02 localhost CS:  0010 DS: 0018 ES: 0018 CR0: 0000000080050033
Jan 27 07:33:02 localhost CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000000a0
Jan 27 07:33:02 localhost Process swapper (pid: 0, threadinfo ffff81003f04e000, task ffff81003f022080)
Jan 27 07:33:02 localhost Stack:  0000004400000000 0002002000000000 ffff81000000caa8 0000000100000000
Jan 27 07:33:02 localhost 0000000000000000 00000000802324df 0000000000000000 0000000000000001
Jan 27 07:33:02 localhost ffff81003f04fdf8 0000000000000000 0000000000000020 ffff81000000caa0
Jan 27 07:33:02 localhost Call Trace:
Jan 27 07:33:02 localhost [<ffffffff8025a340>] __alloc_pages+0x61/0x2b5
Jan 27 07:33:02 localhost [<ffffffff8026ec4a>] alloc_page_interleave+0x40/0x83
Jan 27 07:33:02 localhost [<ffffffff80259d0f>] __get_free_pages+0xe/0x33
Jan 27 07:33:02 localhost [<ffffffff802102da>] cpu_init+0x129/0x30b
Jan 27 07:33:02 localhost [<ffffffff802180e2>] start_secondary+0x13/0x479
Jan 27 07:33:02 localhost 
Jan 27 07:33:02 localhost 
Jan 27 07:33:02 localhost Code: 83 3b 00 75 6d 48 63 43 08 49 8d bc 24 50 01 00 00 45 31 ed 
Jan 27 07:33:02 localhost RIP  [<ffffffff80259ee1>] get_page_from_freelist+0x179/0x473
Jan 27 07:33:02 localhost RSP <ffff81003f04fda8>
Jan 27 07:33:02 localhost CR2: 0000000000000000
Jan 27 07:33:02 localhost <0>Kernel panic - not syncing: Attempted to kill the idle task!
Jan 27 07:33:02 localhost <6>Real Time Clock Driver v1.12ac
Jan 27 07:33:02 localhost hpet_resources: 0xfed00000 is busy
Jan 27 07:33:02 localhost Linux agpgart interface v0.101 (c) Dave Jones
Jan 27 07:33:02 localhost input: Power Button (FF) as /class/input/input0
Jan 27 07:33:02 localhost ACPI: Power Button (FF) [PWRF]
Jan 27 07:33:02 localhost input: Power Button (CM) as /class/input/input1
Jan 27 07:33:02 localhost ACPI: Power Button (CM) [PWRB]
Jan 27 07:33:02 localhost ACPI: Processor [CPU0] (supports 8 throttling states)
Jan 27 07:33:02 localhost ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Jan 27 07:33:02 localhost ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Jan 27 07:33:02 localhost ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Jan 27 07:33:02 localhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jan 27 07:33:02 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 27 07:33:02 localhost pnp: the driver 'serial' has been registered
Jan 27 07:33:02 localhost pnp: match found with the PnP device '00:08' and the driver 'serial'
Jan 27 07:33:02 localhost 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 27 07:33:02 localhost Floppy drive(s): fd0 is 1.44M
Jan 27 07:33:02 localhost FDC 0 is a post-1991 82077
Jan 27 07:33:02 localhost RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jan 27 07:33:02 localhost loop: loaded (max 8 devices)
Jan 27 07:33:02 localhost Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
Jan 27 07:33:02 localhost Copyright (c) 1999-2006 Intel Corporation.
Jan 27 07:33:02 localhost e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
Jan 27 07:33:02 localhost e100: Copyright(c) 1999-2006 Intel Corporation
Jan 27 07:33:02 localhost forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
Jan 27 07:33:02 localhost tun: Universal TUN/TAP device driver, 1.6
Jan 27 07:33:02 localhost tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Jan 27 07:33:02 localhost r8169 Gigabit Ethernet driver 2.2LK loaded
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:04:00.0 to 64
Jan 27 07:33:02 localhost eth0: RTL8168b/8111b at 0xffffc20000006000, 00:1a:4d:47:2a:6b, IRQ 16
Jan 27 07:33:02 localhost netconsole: not configured, aborting
Jan 27 07:33:02 localhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 27 07:33:02 localhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 27 07:33:02 localhost JMB363: IDE controller at PCI slot 0000:03:00.0
Jan 27 07:33:02 localhost PCI: Device 0000:03:00.0 not available because of resource collisions
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
Jan 27 07:33:02 localhost JMB363: BIOS configuration fixed.
Jan 27 07:33:02 localhost JMB363: chipset revision 2
Jan 27 07:33:02 localhost JMB363: 100% native mode on irq 19
Jan 27 07:33:02 localhost JMB363: dma_base is invalid
Jan 27 07:33:02 localhost ide0: JMB363 Bus-Master DMA disabled (BIOS)
Jan 27 07:33:02 localhost JMB363: dma_base is invalid
Jan 27 07:33:02 localhost ide1: JMB363 Bus-Master DMA disabled (BIOS)
Jan 27 07:33:02 localhost Probing IDE interface ide0...
Jan 27 07:33:02 localhost Probing IDE interface ide1...
Jan 27 07:33:02 localhost JMB363: IDE controller at PCI slot 0000:03:00.1
Jan 27 07:33:02 localhost PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:33:02 localhost JMB363: chipset revision 2
Jan 27 07:33:02 localhost JMB363: 100% native mode on irq 16
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:03:00.1 to 64
Jan 27 07:33:02 localhost ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:DMA
Jan 27 07:33:02 localhost ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:pio, hdh:pio
Jan 27 07:33:02 localhost Probing IDE interface ide2...
Jan 27 07:33:02 localhost hdf: 16X8 DVD DUAL, ATAPI CD/DVD-ROM drive
Jan 27 07:33:02 localhost hdf: hw_config=0000
Jan 27 07:33:02 localhost hdf: hw_config=0000
Jan 27 07:33:02 localhost ide2 at 0xb000-0xb007,0xb102 on irq 16
Jan 27 07:33:02 localhost Probing IDE interface ide3...
Jan 27 07:33:02 localhost Probing IDE interface ide0...
Jan 27 07:33:02 localhost Probing IDE interface ide1...
Jan 27 07:33:02 localhost Probing IDE interface ide3...
Jan 27 07:33:02 localhost hdf: ATAPI 126X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache<6>hdf: hw_config=0000
Jan 27 07:33:02 localhost , UDMA(66)
Jan 27 07:33:02 localhost Uniform CD-ROM driver Revision: 3.20
Jan 27 07:33:02 localhost megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
Jan 27 07:33:02 localhost megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
Jan 27 07:33:02 localhost megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
Jan 27 07:33:02 localhost ahci 0000:00:1f.2: version 2.0
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jan 27 07:33:02 localhost ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
Jan 27 07:33:02 localhost ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part 
Jan 27 07:33:02 localhost ata1: SATA max UDMA/133 cmd 0xFFFFC20000012100 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:33:02 localhost ata2: SATA max UDMA/133 cmd 0xFFFFC20000012180 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:33:02 localhost ata3: SATA max UDMA/133 cmd 0xFFFFC20000012200 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:33:02 localhost ata4: SATA max UDMA/133 cmd 0xFFFFC20000012280 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:33:02 localhost ata5: SATA max UDMA/133 cmd 0xFFFFC20000012300 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:33:02 localhost ata6: SATA max UDMA/133 cmd 0xFFFFC20000012380 ctl 0x0 bmdma 0x0 irq 1275
Jan 27 07:33:02 localhost scsi0 : ahci
Jan 27 07:33:02 localhost ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 27 07:33:02 localhost ata1.00: ATA-7, max UDMA/133, 488395055 sectors: LBA48 NCQ (depth 31/32)
Jan 27 07:33:02 localhost ata1.00: ata1: dev 0 multi count 0
Jan 27 07:33:02 localhost ata1.00: configured for UDMA/133
Jan 27 07:33:02 localhost scsi1 : ahci
Jan 27 07:33:02 localhost ata2: SATA link down (SStatus 0 SControl 300)
Jan 27 07:33:02 localhost scsi2 : ahci
Jan 27 07:33:02 localhost ata3: SATA link down (SStatus 0 SControl 300)
Jan 27 07:33:02 localhost scsi3 : ahci
Jan 27 07:33:02 localhost ata4: SATA link down (SStatus 0 SControl 300)
Jan 27 07:33:02 localhost scsi4 : ahci
Jan 27 07:33:02 localhost ata5: SATA link down (SStatus 0 SControl 300)
Jan 27 07:33:02 localhost scsi5 : ahci
Jan 27 07:33:02 localhost ata6: SATA link down (SStatus 0 SControl 300)
Jan 27 07:33:02 localhost scsi 0:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
Jan 27 07:33:02 localhost SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
Jan 27 07:33:02 localhost sda: Write Protect is off
Jan 27 07:33:02 localhost sda: Mode Sense: 00 3a 00 00
Jan 27 07:33:02 localhost SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 27 07:33:02 localhost SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
Jan 27 07:33:02 localhost sda: Write Protect is off
Jan 27 07:33:02 localhost sda: Mode Sense: 00 3a 00 00
Jan 27 07:33:02 localhost SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 27 07:33:02 localhost sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
Jan 27 07:33:02 localhost sd 0:0:0:0: Attached scsi disk sda
Jan 27 07:33:02 localhost sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 27 07:33:02 localhost Fusion MPT base driver 3.04.03
Jan 27 07:33:02 localhost Copyright (c) 1999-2007 LSI Logic Corporation
Jan 27 07:33:02 localhost Fusion MPT SPI Host driver 3.04.03
Jan 27 07:33:02 localhost Fusion MPT SAS Host driver 3.04.03
Jan 27 07:33:02 localhost ieee1394: raw1394: /dev/raw1394 device initialized
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1a.7 to 64
Jan 27 07:33:02 localhost ehci_hcd 0000:00:1a.7: EHCI Host Controller
Jan 27 07:33:02 localhost ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jan 27 07:33:02 localhost PCI: cache line size of 32 is not supported by device 0000:00:1a.7
Jan 27 07:33:02 localhost ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9100000
Jan 27 07:33:02 localhost ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 27 07:33:02 localhost usb usb1: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost hub 1-0:1.0: USB hub found
Jan 27 07:33:02 localhost hub 1-0:1.0: 6 ports detected
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jan 27 07:33:02 localhost ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jan 27 07:33:02 localhost ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Jan 27 07:33:02 localhost PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jan 27 07:33:02 localhost ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9101000
Jan 27 07:33:02 localhost ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 27 07:33:02 localhost usb usb2: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost hub 2-0:1.0: USB hub found
Jan 27 07:33:02 localhost hub 2-0:1.0: 6 ports detected
Jan 27 07:33:02 localhost ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Jan 27 07:33:02 localhost USB Universal Host Controller Interface driver v3.0
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1a.0 to 64
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
Jan 27 07:33:02 localhost usb usb3: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost hub 3-0:1.0: USB hub found
Jan 27 07:33:02 localhost hub 3-0:1.0: 2 ports detected
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1a.1 to 64
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
Jan 27 07:33:02 localhost usb usb4: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost hub 4-0:1.0: USB hub found
Jan 27 07:33:02 localhost hub 4-0:1.0: 2 ports detected
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1a.2 to 64
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1a.2: UHCI Host Controller
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
Jan 27 07:33:02 localhost usb usb5: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost hub 5-0:1.0: USB hub found
Jan 27 07:33:02 localhost hub 5-0:1.0: 2 ports detected
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
Jan 27 07:33:02 localhost usb usb6: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost hub 6-0:1.0: USB hub found
Jan 27 07:33:02 localhost hub 6-0:1.0: 2 ports detected
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
Jan 27 07:33:02 localhost usb usb7: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost hub 7-0:1.0: USB hub found
Jan 27 07:33:02 localhost hub 7-0:1.0: 2 ports detected
Jan 27 07:33:02 localhost usb 1-4: new high speed USB device using ehci_hcd and address 4
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Jan 27 07:33:02 localhost uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
Jan 27 07:33:02 localhost usb usb8: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost hub 8-0:1.0: USB hub found
Jan 27 07:33:02 localhost hub 8-0:1.0: 2 ports detected
Jan 27 07:33:02 localhost usb 1-4: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost usb 3-2: new low speed USB device using uhci_hcd and address 2
Jan 27 07:33:02 localhost usb 3-2: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost usb 4-1: new full speed USB device using uhci_hcd and address 2
Jan 27 07:33:02 localhost usb 4-1: configuration #1 chosen from 1 choice
Jan 27 07:33:02 localhost drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10A2
Jan 27 07:33:02 localhost usbcore: registered new interface driver usblp
Jan 27 07:33:02 localhost drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jan 27 07:33:02 localhost Initializing USB Mass Storage driver...
Jan 27 07:33:02 localhost usbcore: registered new interface driver usb-storage
Jan 27 07:33:02 localhost USB Mass Storage support registered.
Jan 27 07:33:02 localhost HID device not claimed by input or hiddev
Jan 27 07:33:02 localhost input: Logitech USB Receiver as /class/input/input2
Jan 27 07:33:02 localhost input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-1
Jan 27 07:33:02 localhost input: Logitech USB Receiver as /class/input/input3
Jan 27 07:33:02 localhost input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1
Jan 27 07:33:02 localhost usbcore: registered new interface driver usbhid
Jan 27 07:33:02 localhost drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan 27 07:33:02 localhost pnp: the driver 'i8042 kbd' has been registered
Jan 27 07:33:02 localhost pnp: the driver 'i8042 aux' has been registered
Jan 27 07:33:02 localhost pnp: the driver 'i8042 kbd' has been unregistered
Jan 27 07:33:02 localhost pnp: the driver 'i8042 aux' has been unregistered
Jan 27 07:33:02 localhost PNP: No PS/2 controller found. Probing ports directly.
Jan 27 07:33:02 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 27 07:33:02 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 27 07:33:02 localhost mice: PS/2 mouse device common for all mice
Jan 27 07:33:02 localhost device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
Jan 27 07:33:02 localhost Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
Jan 27 07:33:02 localhost Audigy2 value: Special config.
Jan 27 07:33:02 localhost ALSA device list:
Jan 27 07:33:02 localhost #0: Audigy 2 Value [SB0400] (rev.0, serial:0x10011102) at 0xd000, irq 18
Jan 27 07:33:02 localhost oprofile: using NMI interrupt.
Jan 27 07:33:02 localhost IPv4 over IPv4 tunneling driver
Jan 27 07:33:02 localhost TCP cubic registered
Jan 27 07:33:02 localhost NET: Registered protocol family 1
Jan 27 07:33:02 localhost NET: Registered protocol family 10
Jan 27 07:33:02 localhost IPv6 over IPv4 tunneling driver
Jan 27 07:33:02 localhost NET: Registered protocol family 17
Jan 27 07:33:02 localhost 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
Jan 27 07:33:02 localhost All bugs added by David S. Miller <[email protected]>
Jan 27 07:33:02 localhost ACPI: (supports S0 S3 S4 S5)
Jan 27 07:33:02 localhost ReiserFS: sda7: found reiserfs format "3.6" with standard journal
Jan 27 07:33:02 localhost ReiserFS: sda7: using ordered data mode
Jan 27 07:33:02 localhost ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Jan 27 07:33:02 localhost ReiserFS: sda7: checking transaction log (sda7)
Jan 27 07:33:02 localhost ReiserFS: sda7: journal-1153: found in header: first_unflushed_offset 2041, last_flushed_trans_id 1617016
Jan 27 07:33:02 localhost ReiserFS: sda7: journal-1206: Starting replay from offset 2041, trans_id 1617017
Jan 27 07:33:02 localhost ReiserFS: sda7: journal-1299: Setting newest_mount_id to 225
Jan 27 07:33:02 localhost ReiserFS: sda7: Using r5 hash to sort names
Jan 27 07:33:02 localhost VFS: Mounted root (reiserfs filesystem) readonly.
Jan 27 07:33:02 localhost Freeing unused kernel memory: 324k freed
Jan 27 07:33:02 localhost i2c /dev entries driver
Jan 27 07:33:02 localhost nvidia: module license 'NVIDIA' taints kernel.
Jan 27 07:33:02 localhost ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 27 07:33:02 localhost PCI: Setting latency timer of device 0000:01:00.0 to 64
Jan 27 07:33:02 localhost NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
Jan 27 07:33:02 localhost kjournald starting.  Commit interval 5 seconds
Jan 27 07:33:02 localhost EXT3 FS on sda6, internal journal
Jan 27 07:33:02 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jan 27 07:33:02 localhost kjournald starting.  Commit interval 5 seconds
Jan 27 07:33:02 localhost EXT3 FS on sda4, internal journal
Jan 27 07:33:02 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jan 27 07:33:02 localhost fuse init (API version 7.8)
Jan 27 07:33:02 localhost fuse distribution version: 2.7.0
Jan 27 07:33:02 localhost Adding 2441840k swap on /dev/sda5.  Priority:-1 extents:1 across:2441840k
Jan 27 07:33:02 localhost r8169: eth0: link up
Jan 27 07:33:02 localhost r8169: eth0: link up
Jan 27 07:33:12 localhost eth0: no IPv6 routers present
Jan 27 07:33:13 localhost device eth0 entered promiscuous mode
Jan 27 07:33:13 localhost br0: port 1(eth0) entering learning state
Jan 27 07:33:13 localhost br0: topology change detected, propagating
Jan 27 07:33:13 localhost br0: port 1(eth0) entering forwarding state
Jan 27 07:33:23 localhost br0: no IPv6 routers present
Jan 27 07:34:03 localhost ata1: D2H reg with I during NCQ, this message won't be printed again
Jan 27 07:35:12 localhost hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request.
 
OP
Shelnutt2

Shelnutt2

Overclockers Team Content Editor
Joined
Jun 17, 2005
Location
/home/
Did you turn on SMP when you built the kernel?

Yes, I haven't changed a thing, besides overclock, and I reset to stock clocks and I get the same error, so when I overclocked (further) and went into Gentoo something happened.
 

MRD

Senior Member
Joined
Feb 14, 2003
Odd, I'd chalk it up to overclocking too far and getting a wacky malfunction... if you're sure that gentoo was seeing both cores before.
 
OP
Shelnutt2

Shelnutt2

Overclockers Team Content Editor
Joined
Jun 17, 2005
Location
/home/
Odd, I'd chalk it up to overclocking too far and getting a wacky malfunction... if you're sure that gentoo was seeing both cores before.

100% positive Gentoo was seeing both cores before, as I've been folding the SMP client, and now the SMP client will not start because it recognizes I only have 1 core.

I guess I'll recompile my kernel and see if that helps, but I don't know. It doesn't even detect 2 cores at stock settings...but windows detects both cores, so does my small debian partition.
 

Captain Newbie

Senior Django-loving Member
This might be something significant:
Code:
Jan 27 07:29:55 localhost Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 
Jan 27 07:29:55 localhost [<ffffffff80259ee1>] get_page_from_freelist+0x179/0x473
Jan 27 07:29:55 localhost PGD 0 
Jan 27 07:29:55 localhost Oops: 0000 [1] SMP 
Jan 27 07:29:55 localhost CPU 1 
Jan 27 07:29:55 localhost Modules linked in:
Jan 27 07:29:55 localhost Pid: 0, comm: swapper Not tainted 2.6.20-gentoo-r8 #6
Jan 27 07:29:55 localhost RIP: 0010:[<ffffffff80259ee1>]  [<ffffffff80259ee1>] get_page_from_freelist+0x179/0x473
Jan 27 07:29:55 localhost RSP: 0018:ffff81003f04fda8  EFLAGS: 00010046
Jan 27 07:29:55 localhost RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
Jan 27 07:29:55 localhost RDX: 0000000000000000 RSI: 00000000000004e7 RDI: ffff81000000b3c0
Jan 27 07:29:55 localhost RBP: 0000000000000046 R08: 0000000000000000 R09: 000000000003cfc9
Jan 27 07:29:55 localhost R10: 0000000000000000 R11: 0000000000000001 R12: ffff81000000b3c0
Jan 27 07:29:55 localhost R13: 0000000000000000 R14: 0000000000000000 R15: ffff81000000caa0
Jan 27 07:29:55 localhost FS:  0000000000000000(0000) GS:ffff81003f00cd40(0000) knlGS:0000000000000000
Jan 27 07:29:55 localhost CS:  0010 DS: 0018 ES: 0018 CR0: 0000000080050033
Jan 27 07:29:55 localhost CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000000a0
Jan 27 07:29:55 localhost Process swapper (pid: 0, threadinfo ffff81003f04e000, task ffff81003f022080)
Jan 27 07:29:55 localhost Stack:  0000004400000000 0002002000000000 ffff81000000caa8 0000000100000000
Jan 27 07:29:55 localhost 0000000000000000 00000000802324df 0000000000000000 0000000000000001
Jan 27 07:29:55 localhost ffff81003f04fdf8 0000000000000000 0000000000000020 ffff81000000caa0
Jan 27 07:29:55 localhost Call Trace:
Jan 27 07:29:55 localhost [<ffffffff8025a340>] __alloc_pages+0x61/0x2b5
Jan 27 07:29:55 localhost [<ffffffff8026ec4a>] alloc_page_interleave+0x40/0x83
Jan 27 07:29:55 localhost [<ffffffff80259d0f>] __get_free_pages+0xe/0x33
Jan 27 07:29:55 localhost [<ffffffff802102da>] cpu_init+0x129/0x30b
Jan 27 07:29:55 localhost [<ffffffff802180e2>] start_secondary+0x13/0x479
Oopses are rarely good things, sometimes I wish we would set PANIC_ON_OOPS so that they got people's attention.

Oh wait, you actually *did* try to panic.
Code:
Jan 27 07:29:55 localhost <0>Kernel panic - not syncing: Attempted to kill the idle task!
Something is horribly wrong here. (???) You should have halted!

Edit: Apparently, get_page_from_freelist() is a pretty oopsing function anyway.
 
OP
Shelnutt2

Shelnutt2

Overclockers Team Content Editor
Joined
Jun 17, 2005
Location
/home/
This might be something significant:
<snip>
Oopses are rarely good things, sometimes I wish we would set PANIC_ON_OOPS so that they got people's attention.

Oh wait, you actually *did* try to panic.
<snip>
Something is horribly wrong here. (???)

Weird, it tried to panic but actually wasn't able to?? Weird.
 
OP
Shelnutt2

Shelnutt2

Overclockers Team Content Editor
Joined
Jun 17, 2005
Location
/home/
Fixed it, update the the latest kernel and compiled. Changed from generic X86_64 PC to Core 2 architecture. Must be a weird bug with the 2.6.20 kernel and something happened when I overclocked the CPU. Thats why even recompiling the old kernel didn't work.

Code:
Jan 29 13:37:08 localhost Linux version 2.6.23-gentoo-r6 ([email protected]) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #3 SMP Tue Jan 29 13:34:05 EST 2008
Jan 29 13:37:08 localhost Command line: root=/dev/sda7
Jan 29 13:37:08 localhost BIOS-provided physical RAM map:
Jan 29 13:37:08 localhost BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
Jan 29 13:37:08 localhost BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Jan 29 13:37:08 localhost BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 29 13:37:08 localhost BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
Jan 29 13:37:08 localhost BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
Jan 29 13:37:08 localhost BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
Jan 29 13:37:08 localhost BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
Jan 29 13:37:08 localhost BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
Jan 29 13:37:08 localhost BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jan 29 13:37:08 localhost Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Jan 29 13:37:08 localhost Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
Jan 29 13:37:08 localhost end_pfn_map = 1048576
Jan 29 13:37:08 localhost DMI 2.4 present.
Jan 29 13:37:08 localhost ACPI: RSDP 000F6C30, 0014 (r0 GBT   )
Jan 29 13:37:08 localhost ACPI: RSDT 3FEE3040, 0034 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
Jan 29 13:37:08 localhost ACPI: FACP 3FEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
Jan 29 13:37:08 localhost ACPI: DSDT 3FEE3180, 4B32 (r1 GBT    GBTUACPI     1000 MSFT  100000C)
Jan 29 13:37:08 localhost ACPI: FACS 3FEE0000, 0040
Jan 29 13:37:08 localhost ACPI: HPET 3FEE7E00, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
Jan 29 13:37:08 localhost ACPI: MCFG 3FEE7E80, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
Jan 29 13:37:08 localhost ACPI: APIC 3FEE7D00, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
Jan 29 13:37:08 localhost No NUMA configuration found
Jan 29 13:37:08 localhost Faking a node at 0000000000000000-000000003fee0000
Jan 29 13:37:08 localhost Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Jan 29 13:37:08 localhost Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
Jan 29 13:37:08 localhost Bootmem setup node 0 0000000000000000-000000003fee0000
Jan 29 13:37:08 localhost Zone PFN ranges:
Jan 29 13:37:08 localhost DMA             0 ->     4096
Jan 29 13:37:08 localhost DMA32        4096 ->  1048576
Jan 29 13:37:08 localhost Normal    1048576 ->  1048576
Jan 29 13:37:08 localhost Movable zone start PFN for each node
Jan 29 13:37:08 localhost early_node_map[2] active PFN ranges
Jan 29 13:37:08 localhost 0:        0 ->      158
Jan 29 13:37:08 localhost 0:      256 ->   261856
Jan 29 13:37:08 localhost On node 0 totalpages: 261758
Jan 29 13:37:08 localhost DMA zone: 56 pages used for memmap
Jan 29 13:37:08 localhost DMA zone: 3389 pages reserved
Jan 29 13:37:08 localhost DMA zone: 553 pages, LIFO batch:0
Jan 29 13:37:08 localhost DMA32 zone: 3524 pages used for memmap
Jan 29 13:37:08 localhost DMA32 zone: 254236 pages, LIFO batch:31
Jan 29 13:37:08 localhost Normal zone: 0 pages used for memmap
Jan 29 13:37:08 localhost Movable zone: 0 pages used for memmap
Jan 29 13:37:08 localhost ACPI: PM-Timer IO Port: 0x408
Jan 29 13:37:08 localhost ACPI: Local APIC address 0xfee00000
Jan 29 13:37:08 localhost ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jan 29 13:37:08 localhost Processor #0 (Bootup-CPU)
Jan 29 13:37:08 localhost ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jan 29 13:37:08 localhost Processor #1
Jan 29 13:37:08 localhost ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
Jan 29 13:37:08 localhost ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
Jan 29 13:37:08 localhost ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Jan 29 13:37:08 localhost ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Jan 29 13:37:08 localhost ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Jan 29 13:37:08 localhost ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
Jan 29 13:37:08 localhost ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jan 29 13:37:08 localhost IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
Jan 29 13:37:08 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jan 29 13:37:08 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jan 29 13:37:08 localhost ACPI: IRQ0 used by override.
Jan 29 13:37:08 localhost ACPI: IRQ2 used by override.
Jan 29 13:37:08 localhost ACPI: IRQ9 used by override.
Jan 29 13:37:08 localhost Setting APIC routing to flat
Jan 29 13:37:08 localhost ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jan 29 13:37:08 localhost Using ACPI (MADT) for SMP configuration information
Jan 29 13:37:08 localhost swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
Jan 29 13:37:08 localhost swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
Jan 29 13:37:08 localhost swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Jan 29 13:37:08 localhost Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)
Jan 29 13:37:08 localhost SMP: Allowing 4 CPUs, 2 hotplug CPUs
Jan 29 13:37:08 localhost PERCPU: Allocating 42984 bytes of per cpu data
Jan 29 13:37:08 localhost Built 1 zonelists in Node order.  Total pages: 254789
Jan 29 13:37:08 localhost Policy zone: DMA32
Jan 29 13:37:08 localhost Kernel command line: root=/dev/sda7
Jan 29 13:37:08 localhost Initializing CPU#0
Jan 29 13:37:08 localhost PID hash table entries: 4096 (order: 12, 32768 bytes)
Jan 29 13:37:08 localhost time.c: Detected 3429.997 MHz processor.
Jan 29 13:37:08 localhost Console: colour VGA+ 80x25
Jan 29 13:37:08 localhost console [tty0] enabled
Jan 29 13:37:08 localhost Checking aperture...
Jan 29 13:37:08 localhost Memory: 1018588k/1047424k available (4496k kernel code, 28444k reserved, 2329k data, 356k init)
Jan 29 13:37:08 localhost Calibrating delay using timer specific routine.. 6864.39 BogoMIPS (lpj=13728780)
Jan 29 13:37:08 localhost Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jan 29 13:37:08 localhost Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Jan 29 13:37:08 localhost Mount-cache hash table entries: 256
Jan 29 13:37:08 localhost CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 29 13:37:08 localhost CPU: L2 cache: 2048K
Jan 29 13:37:08 localhost CPU 0/0 -> Node 0
Jan 29 13:37:08 localhost using mwait in idle threads.
Jan 29 13:37:08 localhost CPU: Physical Processor ID: 0
Jan 29 13:37:08 localhost CPU: Processor Core ID: 0
Jan 29 13:37:08 localhost CPU0: Thermal monitoring enabled (TM2)
Jan 29 13:37:08 localhost SMP alternatives: switching to UP code
Jan 29 13:37:08 localhost ACPI: Core revision 20070126
Jan 29 13:37:08 localhost Using local APIC timer interrupts.
Jan 29 13:37:08 localhost result 30624953
Jan 29 13:37:08 localhost Detected 30.624 MHz APIC timer.
Jan 29 13:37:08 localhost SMP alternatives: switching to SMP code
Jan 29 13:37:08 localhost Booting processor 1/2 APIC 0x1
Jan 29 13:37:08 localhost Initializing CPU#1
Jan 29 13:37:08 localhost Calibrating delay using timer specific routine.. 6859.99 BogoMIPS (lpj=13719992)
Jan 29 13:37:08 localhost CPU: L1 I cache: 32K, L1 D cache: 32K
Jan 29 13:37:08 localhost CPU: L2 cache: 2048K
Jan 29 13:37:08 localhost CPU 1/1 -> Node 0
Jan 29 13:37:08 localhost CPU: Physical Processor ID: 0
Jan 29 13:37:08 localhost CPU: Processor Core ID: 1
Jan 29 13:37:08 localhost CPU1: Thermal monitoring enabled (TM2)
Jan 29 13:37:08 localhost Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 02
Jan 29 13:37:08 localhost checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jan 29 13:37:08 localhost Brought up 2 CPUs
Jan 29 13:37:08 localhost NET: Registered protocol family 16
Jan 29 13:37:08 localhost No dock devices found.
Jan 29 13:37:08 localhost ACPI: bus type pci registered
Jan 29 13:37:08 localhost PCI: Using MMCONFIG at f0000000 - f3ffffff
Jan 29 13:37:08 localhost ACPI: EC: Look up EC in DSDT
Jan 29 13:37:08 localhost ACPI: Interpreter enabled
Jan 29 13:37:08 localhost ACPI: (supports S0 S3 S4 S5)
Jan 29 13:37:08 localhost ACPI: Using IOAPIC for interrupt routing
Jan 29 13:37:08 localhost ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 29 13:37:08 localhost PCI: Transparent bridge - 0000:00:1e.0
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jan 29 13:37:08 localhost ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
Jan 29 13:37:08 localhost Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 29 13:37:08 localhost pnp: PnP ACPI init
Jan 29 13:37:08 localhost ACPI: bus type pnp registered
Jan 29 13:37:08 localhost pnp: PnP ACPI: found 14 devices
Jan 29 13:37:08 localhost ACPI: ACPI bus type pnp unregistered
Jan 29 13:37:08 localhost SCSI subsystem initialized
Jan 29 13:37:08 localhost libata version 2.21 loaded.
Jan 29 13:37:08 localhost usbcore: registered new interface driver usbfs
Jan 29 13:37:08 localhost usbcore: registered new interface driver hub
Jan 29 13:37:08 localhost usbcore: registered new device driver usb
Jan 29 13:37:08 localhost PCI: Using ACPI for IRQ routing
Jan 29 13:37:08 localhost PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jan 29 13:37:08 localhost PCI-GART: No AMD northbridge found.
Jan 29 13:37:08 localhost hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Jan 29 13:37:08 localhost hpet0: 4 64-bit timers, 14318180 Hz
Jan 29 13:37:08 localhost Time: tsc clocksource has been installed.
Jan 29 13:37:08 localhost pnp: 00:0a: ioport range 0x400-0x4bf has been reserved
Jan 29 13:37:08 localhost pnp: 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved
Jan 29 13:37:08 localhost pnp: 00:0c: iomem range 0xd1e00-0xd3fff has been reserved
Jan 29 13:37:08 localhost pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
Jan 29 13:37:08 localhost pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
Jan 29 13:37:08 localhost pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
Jan 29 13:37:08 localhost PCI: Bridge: 0000:00:01.0
Jan 29 13:37:08 localhost IO window: a000-afff
Jan 29 13:37:08 localhost MEM window: f4000000-f6ffffff
Jan 29 13:37:08 localhost PREFETCH window: e0000000-efffffff
Jan 29 13:37:08 localhost PCI: Bridge: 0000:00:1c.0
Jan 29 13:37:08 localhost IO window: 9000-9fff
Jan 29 13:37:08 localhost MEM window: disabled.
Jan 29 13:37:08 localhost PREFETCH window: disabled.
Jan 29 13:37:08 localhost PCI: Bridge: 0000:00:1c.3
Jan 29 13:37:08 localhost IO window: b000-bfff
Jan 29 13:37:08 localhost MEM window: f9000000-f90fffff
Jan 29 13:37:08 localhost PREFETCH window: disabled.
Jan 29 13:37:08 localhost PCI: Bridge: 0000:00:1c.4
Jan 29 13:37:08 localhost IO window: c000-cfff
Jan 29 13:37:08 localhost MEM window: f7000000-f8ffffff
Jan 29 13:37:08 localhost PREFETCH window: 40000000-400fffff
Jan 29 13:37:08 localhost PCI: Bridge: 0000:00:1e.0
Jan 29 13:37:08 localhost IO window: d000-dfff
Jan 29 13:37:08 localhost MEM window: disabled.
Jan 29 13:37:08 localhost PREFETCH window: disabled.
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1c.3 to 64
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1c.4 to 64
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jan 29 13:37:08 localhost NET: Registered protocol family 2
Jan 29 13:37:08 localhost IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Jan 29 13:37:08 localhost TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
Jan 29 13:37:08 localhost TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 29 13:37:08 localhost TCP: Hash tables configured (established 131072 bind 65536)
Jan 29 13:37:08 localhost TCP reno registered
Jan 29 13:37:08 localhost Total HugeTLB memory allocated, 0
Jan 29 13:37:08 localhost Installing knfsd (copyright (C) 1996 [email protected]).
Jan 29 13:37:08 localhost NTFS driver 2.1.28 [Flags: R/W DEBUG].
Jan 29 13:37:08 localhost JFS: nTxBlock = 7957, nTxLock = 63661
Jan 29 13:37:08 localhost SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Jan 29 13:37:08 localhost SGI XFS Quota Management subsystem
Jan 29 13:37:08 localhost GFS2 (built Jan 29 2008 13:30:40) installed
Jan 29 13:37:08 localhost io scheduler noop registered
Jan 29 13:37:08 localhost io scheduler deadline registered
Jan 29 13:37:08 localhost io scheduler cfq registered (default)
Jan 29 13:37:08 localhost Boot video device is 0000:01:00.0
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:01.0 to 64
Jan 29 13:37:08 localhost assign_interrupt_mode Found MSI capability
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:01.0:pcie00]
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:01.0:pcie03]
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1c.0 to 64
Jan 29 13:37:08 localhost assign_interrupt_mode Found MSI capability
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:1c.0:pcie00]
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:1c.0:pcie02]
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:1c.0:pcie03]
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1c.3 to 64
Jan 29 13:37:08 localhost assign_interrupt_mode Found MSI capability
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:1c.3:pcie00]
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:1c.3:pcie02]
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:1c.3:pcie03]
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1c.4 to 64
Jan 29 13:37:08 localhost assign_interrupt_mode Found MSI capability
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:1c.4:pcie00]
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:1c.4:pcie02]
Jan 29 13:37:08 localhost Allocate Port Service[0000:00:1c.4:pcie03]
Jan 29 13:37:08 localhost Real Time Clock Driver v1.12ac
Jan 29 13:37:08 localhost hpet_resources: 0xfed00000 is busy
Jan 29 13:37:08 localhost Linux agpgart interface v0.102
Jan 29 13:37:08 localhost input: Power Button (FF) as /class/input/input0
Jan 29 13:37:08 localhost ACPI: Power Button (FF) [PWRF]
Jan 29 13:37:08 localhost input: Power Button (CM) as /class/input/input1
Jan 29 13:37:08 localhost ACPI: Power Button (CM) [PWRB]
Jan 29 13:37:08 localhost ACPI: Processor [CPU0] (supports 8 throttling states)
Jan 29 13:37:08 localhost ACPI: Processor [CPU1] (supports 8 throttling states)
Jan 29 13:37:08 localhost ACPI Exception (processor_core-0821): AE_NOT_FOUND, Processor Device is not present [20070126]
Jan 29 13:37:08 localhost ACPI Exception (processor_core-0821): AE_NOT_FOUND, Processor Device is not present [20070126]
Jan 29 13:37:08 localhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jan 29 13:37:08 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 29 13:37:08 localhost 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 29 13:37:08 localhost Floppy drive(s): fd0 is 1.44M
Jan 29 13:37:08 localhost FDC 0 is a post-1991 82077
Jan 29 13:37:08 localhost RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jan 29 13:37:08 localhost loop: module loaded
Jan 29 13:37:08 localhost tun: Universal TUN/TAP device driver, 1.6
Jan 29 13:37:08 localhost tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Jan 29 13:37:08 localhost r8169 Gigabit Ethernet driver 2.2LK loaded
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:04:00.0 to 64
Jan 29 13:37:08 localhost eth0: RTL8168b/8111b at 0xffffc200001e0000, 00:1a:4d:47:2a:6b, XID 38000000 IRQ 16
Jan 29 13:37:08 localhost netconsole: not configured, aborting
Jan 29 13:37:08 localhost Linux video capture interface: v2.00
Jan 29 13:37:08 localhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 29 13:37:08 localhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 29 13:37:08 localhost Probing IDE interface ide0...
Jan 29 13:37:08 localhost Probing IDE interface ide1...
Jan 29 13:37:08 localhost ahci 0000:00:1f.2: version 2.3
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Jan 29 13:37:08 localhost ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
Jan 29 13:37:08 localhost ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part 
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1f.2 to 64
Jan 29 13:37:08 localhost scsi0 : ahci
Jan 29 13:37:08 localhost scsi1 : ahci
Jan 29 13:37:08 localhost scsi2 : ahci
Jan 29 13:37:08 localhost scsi3 : ahci
Jan 29 13:37:08 localhost scsi4 : ahci
Jan 29 13:37:08 localhost scsi5 : ahci
Jan 29 13:37:08 localhost ata1: SATA max UDMA/133 cmd 0xffffc200001e2100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
Jan 29 13:37:08 localhost ata2: SATA max UDMA/133 cmd 0xffffc200001e2180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
Jan 29 13:37:08 localhost ata3: SATA max UDMA/133 cmd 0xffffc200001e2200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
Jan 29 13:37:08 localhost ata4: SATA max UDMA/133 cmd 0xffffc200001e2280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
Jan 29 13:37:08 localhost ata5: SATA max UDMA/133 cmd 0xffffc200001e2300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
Jan 29 13:37:08 localhost ata6: SATA max UDMA/133 cmd 0xffffc200001e2380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
Jan 29 13:37:08 localhost ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 29 13:37:08 localhost ata1.00: Host Protected Area detected:
Jan 29 13:37:08 localhost 	current size: 488395055 sectors
Jan 29 13:37:08 localhost 	native size: 488397168 sectors
Jan 29 13:37:08 localhost ata1.00: ATA-7: HDT722525DLA380, V44OA80A, max UDMA/133
Jan 29 13:37:08 localhost ata1.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan 29 13:37:08 localhost ata1.00: Host Protected Area detected:
Jan 29 13:37:08 localhost 	current size: 488395055 sectors
Jan 29 13:37:08 localhost 	native size: 488397168 sectors
Jan 29 13:37:08 localhost ata1.00: configured for UDMA/133
Jan 29 13:37:08 localhost ata2: SATA link down (SStatus 0 SControl 300)
Jan 29 13:37:08 localhost ata3: SATA link down (SStatus 0 SControl 300)
Jan 29 13:37:08 localhost ata4: SATA link down (SStatus 0 SControl 300)
Jan 29 13:37:08 localhost ata5: SATA link down (SStatus 0 SControl 300)
Jan 29 13:37:08 localhost ata6: SATA link down (SStatus 0 SControl 300)
Jan 29 13:37:08 localhost scsi 0:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
Jan 29 13:37:08 localhost sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
Jan 29 13:37:08 localhost sd 0:0:0:0: [sda] Write Protect is off
Jan 29 13:37:08 localhost sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 29 13:37:08 localhost sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 29 13:37:08 localhost sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB)
Jan 29 13:37:08 localhost sd 0:0:0:0: [sda] Write Protect is off
Jan 29 13:37:08 localhost sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 29 13:37:08 localhost sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 29 13:37:08 localhost sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
Jan 29 13:37:08 localhost sd 0:0:0:0: [sda] Attached SCSI disk
Jan 29 13:37:08 localhost sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
Jan 29 13:37:08 localhost ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Jan 29 13:37:08 localhost ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:03:00.0 to 64
Jan 29 13:37:08 localhost scsi6 : ahci
Jan 29 13:37:08 localhost scsi7 : ahci
Jan 29 13:37:08 localhost ata7: SATA max UDMA/133 cmd 0xffffc200001e4100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
Jan 29 13:37:08 localhost ata8: SATA max UDMA/133 cmd 0xffffc200001e4180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
Jan 29 13:37:08 localhost ata7: SATA link down (SStatus 0 SControl 300)
Jan 29 13:37:08 localhost ata8: SATA link down (SStatus 0 SControl 300)
Jan 29 13:37:08 localhost PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:03:00.1 to 64
Jan 29 13:37:08 localhost scsi8 : pata_jmicron
Jan 29 13:37:08 localhost scsi9 : pata_jmicron
Jan 29 13:37:08 localhost ata9: PATA max UDMA/100 cmd 0x000000000001b000 ctl 0x000000000001b102 bmdma 0x000000000001b400 irq 16
Jan 29 13:37:08 localhost ata10: PATA max UDMA/100 cmd 0x000000000001b200 ctl 0x000000000001b302 bmdma 0x000000000001b408 irq 16
Jan 29 13:37:08 localhost ata9.01: ATAPI:         16X8 DVD DUAL, A05a, max UDMA/66
Jan 29 13:37:08 localhost ata9.01: configured for UDMA/66
Jan 29 13:37:08 localhost scsi 8:0:1:0: CD-ROM                     16X8 DVD DUAL    A05a PQ: 0 ANSI: 5
Jan 29 13:37:08 localhost sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Jan 29 13:37:08 localhost Uniform CD-ROM driver Revision: 3.20
Jan 29 13:37:08 localhost sr 8:0:1:0: Attached scsi CD-ROM sr0
Jan 29 13:37:08 localhost sr 8:0:1:0: Attached scsi generic sg1 type 5
Jan 29 13:37:08 localhost Fusion MPT base driver 3.04.05
Jan 29 13:37:08 localhost Copyright (c) 1999-2007 LSI Logic Corporation
Jan 29 13:37:08 localhost Fusion MPT SPI Host driver 3.04.05
Jan 29 13:37:08 localhost ieee1394: raw1394: /dev/raw1394 device initialized
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1a.7 to 64
Jan 29 13:37:08 localhost ehci_hcd 0000:00:1a.7: EHCI Host Controller
Jan 29 13:37:08 localhost ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jan 29 13:37:08 localhost PCI: cache line size of 32 is not supported by device 0000:00:1a.7
Jan 29 13:37:08 localhost ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9100000
Jan 29 13:37:08 localhost ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 29 13:37:08 localhost usb usb1: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost hub 1-0:1.0: USB hub found
Jan 29 13:37:08 localhost hub 1-0:1.0: 6 ports detected
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jan 29 13:37:08 localhost ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jan 29 13:37:08 localhost ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Jan 29 13:37:08 localhost PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jan 29 13:37:08 localhost ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9101000
Jan 29 13:37:08 localhost ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 29 13:37:08 localhost usb usb2: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost hub 2-0:1.0: USB hub found
Jan 29 13:37:08 localhost hub 2-0:1.0: 6 ports detected
Jan 29 13:37:08 localhost ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 29 13:37:08 localhost USB Universal Host Controller Interface driver v3.0
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1a.0 to 64
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
Jan 29 13:37:08 localhost usb usb3: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost hub 3-0:1.0: USB hub found
Jan 29 13:37:08 localhost hub 3-0:1.0: 2 ports detected
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1a.1 to 64
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
Jan 29 13:37:08 localhost usb usb4: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost hub 4-0:1.0: USB hub found
Jan 29 13:37:08 localhost hub 4-0:1.0: 2 ports detected
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1a.2 to 64
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1a.2: UHCI Host Controller
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
Jan 29 13:37:08 localhost usb usb5: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost hub 5-0:1.0: USB hub found
Jan 29 13:37:08 localhost hub 5-0:1.0: 2 ports detected
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
Jan 29 13:37:08 localhost usb usb6: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost hub 6-0:1.0: USB hub found
Jan 29 13:37:08 localhost hub 6-0:1.0: 2 ports detected
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
Jan 29 13:37:08 localhost usb usb7: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost hub 7-0:1.0: USB hub found
Jan 29 13:37:08 localhost hub 7-0:1.0: 2 ports detected
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jan 29 13:37:08 localhost PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Jan 29 13:37:08 localhost uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
Jan 29 13:37:08 localhost usb usb8: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost hub 8-0:1.0: USB hub found
Jan 29 13:37:08 localhost hub 8-0:1.0: 2 ports detected
Jan 29 13:37:08 localhost usb 1-4: new high speed USB device using ehci_hcd and address 4
Jan 29 13:37:08 localhost usb 1-4: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10A2
Jan 29 13:37:08 localhost usbcore: registered new interface driver usblp
Jan 29 13:37:08 localhost Initializing USB Mass Storage driver...
Jan 29 13:37:08 localhost usb 3-2: new low speed USB device using uhci_hcd and address 2
Jan 29 13:37:08 localhost usb 3-2: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost usb 4-1: new full speed USB device using uhci_hcd and address 2
Jan 29 13:37:08 localhost usb 4-1: configuration #1 chosen from 1 choice
Jan 29 13:37:08 localhost usbcore: registered new interface driver usb-storage
Jan 29 13:37:08 localhost USB Mass Storage support registered.
Jan 29 13:37:08 localhost PNP: No PS/2 controller found. Probing ports directly.
Jan 29 13:37:08 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 29 13:37:08 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 29 13:37:08 localhost mice: PS/2 mouse device common for all mice
Jan 29 13:37:08 localhost coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
Jan 29 13:37:08 localhost coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
Jan 29 13:37:08 localhost device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
Jan 29 13:37:08 localhost HID device not claimed by input or hiddev
Jan 29 13:37:08 localhost input: Logitech USB Receiver as /class/input/input2
Jan 29 13:37:08 localhost input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-1
Jan 29 13:37:08 localhost Fixing up Logitech keyboard report descriptor
Jan 29 13:37:08 localhost input: Logitech USB Receiver as /class/input/input3
Jan 29 13:37:08 localhost input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1
Jan 29 13:37:08 localhost usbcore: registered new interface driver usbhid
Jan 29 13:37:08 localhost drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Jan 29 13:37:08 localhost Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
Jan 29 13:37:08 localhost ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
Jan 29 13:37:08 localhost Audigy2 value: Special config.
Jan 29 13:37:08 localhost ALSA device list:
Jan 29 13:37:08 localhost #0: Audigy 2 Value [SB0400] (rev.0, serial:0x10011102) at 0xd000, irq 18
Jan 29 13:37:08 localhost oprofile: using NMI interrupt.
Jan 29 13:37:08 localhost IPv4 over IPv4 tunneling driver
Jan 29 13:37:08 localhost TCP probe registered (port=0)
Jan 29 13:37:08 localhost TCP cubic registered
Jan 29 13:37:08 localhost NET: Registered protocol family 1
Jan 29 13:37:08 localhost NET: Registered protocol family 10
Jan 29 13:37:08 localhost IPv6 over IPv4 tunneling driver
Jan 29 13:37:08 localhost NET: Registered protocol family 17
Jan 29 13:37:08 localhost NET: Registered protocol family 4
Jan 29 13:37:08 localhost 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
Jan 29 13:37:08 localhost All bugs added by David S. Miller <[email protected]>
Jan 29 13:37:08 localhost drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Jan 29 13:37:08 localhost ReiserFS: sda7: found reiserfs format "3.6" with standard journal
Jan 29 13:37:08 localhost ReiserFS: sda7: using ordered data mode
Jan 29 13:37:08 localhost ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Jan 29 13:37:08 localhost ReiserFS: sda7: checking transaction log (sda7)
Jan 29 13:37:08 localhost ReiserFS: sda7: journal-1153: found in header: first_unflushed_offset 1665, last_flushed_trans_id 1620297
Jan 29 13:37:08 localhost ReiserFS: sda7: journal-1206: Starting replay from offset 1665, trans_id 1620298
Jan 29 13:37:08 localhost ReiserFS: sda7: journal-1299: Setting newest_mount_id to 231
Jan 29 13:37:08 localhost ReiserFS: sda7: Using r5 hash to sort names
Jan 29 13:37:08 localhost VFS: Mounted root (reiserfs filesystem) readonly.
Jan 29 13:37:08 localhost Freeing unused kernel memory: 356k freed
Jan 29 13:37:08 localhost kjournald starting.  Commit interval 5 seconds
Jan 29 13:37:08 localhost EXT3 FS on sda6, internal journal
Jan 29 13:37:08 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jan 29 13:37:08 localhost kjournald starting.  Commit interval 5 seconds
Jan 29 13:37:08 localhost EXT3 FS on sda4, internal journal
Jan 29 13:37:08 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jan 29 13:37:08 localhost Adding 2441840k swap on /dev/sda5.  Priority:-1 extents:1 across:2441840k
Jan 29 13:37:08 localhost r8169: eth0: link up
Jan 29 13:37:08 localhost r8169: eth0: link up
Jan 29 13:37:17 localhost eth0: no IPv6 routers present
Jan 29 13:37:19 localhost br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Jan 29 13:37:19 localhost device eth0 entered promiscuous mode
Jan 29 13:37:19 localhost br0: port 1(eth0) entering learning state
Jan 29 13:37:19 localhost br0: topology change detected, propagating
Jan 29 13:37:19 localhost br0: port 1(eth0) entering forwarding state
Jan 29 13:37:30 localhost br0: no IPv6 routers present
Jan 29 13:41:08 localhost nvidia: module license 'NVIDIA' taints kernel.
Jan 29 13:41:08 localhost ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 29 13:41:08 localhost PCI: Setting latency timer of device 0000:01:00.0 to 64
Jan 29 13:41:08 localhost NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.09  Fri Jan 11 14:04:37 PST 2008
 
OP
Shelnutt2

Shelnutt2

Overclockers Team Content Editor
Joined
Jun 17, 2005
Location
/home/
Yeah, recompiling a kernel with any uncertain component is a dangerous play, sort of like reinstalling Windows when still overclocked...something is bound to get screwed up somewhere.

Good to hear the problem is solved, though.

Just to clarify:
-Was running overclocked at 3.15GHz
-Pushed overclock to 3.4GHz
-Stability tested in windows
-Booted into linux to resume normal affairs, Gentoo fails to detect core #2
-Reset to stock clock
-Still no joy
-Rebuilt 2.6.20 kernel, to joy
-Built 2.6.23 kernel detected both core
-Reset overclocks to 3.4GHz and now folding away.