Help in designing a High end water cooling system

[Owenator]

3.8 ghz
I ran mem test for 6 hours no errors. Prime95 is still running and have not seen a error. Hopefully when I get home from work its done running.

Sweet! That sounds like it's pretty stable so far, kudos on the build!

Don't forget pics!

 

[Bishopheals]

Sweet! That sounds like it's pretty stable so far, kudos on the build!

Don't forget pics!

You can look at the pics here

http://www.facebook.com/album.php?aid=7419&id=1680140948&l=327ee2dd3b

I will be uploading more photos tonight when I get home.

 

[Bishopheals]

ok its still goign strong

My settings so far are the following
BCLK 200
Dram 1603
Cpu multi 19
unicore auto
opi auto
cpu voltage 1.35
qpi voltage 1.35
dram voltage 1.64

 

[Bishopheals]

 

[Bishopheals]

I am still waiting on my water cooling parts to arrive and my 2 nvidia 295gtx cards. I like to see how much farther i be able to push it.

 

[Owenator]

Nice! Those are the exact same settings as I'm running except I was able to dial down the voltages to 1.30 V for CPU and QPI. I did it all in BIOS though, and wasn't using AI Suite.

 

[Bishopheals]

Nice! Those are the exact same settings as I'm running except I was able to dial down the voltages to 1.30 V for CPU and QPI. I did it all in BIOS though, and wasn't using AI Suite.

I set mine through the Bios. I just launched the AI and Turbo to see what it would show. As for the voltage I'm sure it can go a little lower. I'm still doiogn stabilty test runs at lower voltages till it fails. Just time consuming is all.