help my celleron ii 633 isnt stabil

[gambler]

hi all
this day, i bought a cell II 633. but when i overclocking it , it hang when it came to fsb 110hz. i try using abit sa6r-->1050mhz , isnt stabil, abit bh6-->1050mhz isnt stabil, abit vl6-->1010, ist stabil. please help me to find a better motherboards.
thank you.

ps. sory my english isnt well

 

[engjohn]

We need to know more,
1. What HeatSink are you using?
2. What Voltage is it set at?
3. Are you using an adapter card (s370 to slot 1), If so who makes it?
4. What kind of ram are you using?

Then we might me able to help a little more.

 

[gambler]

I using alphaand fop38 ( combined)
sa6r-->1.95v
vl6-->1.8v
bh-->1.8v
no, i didnt using adapter card
I using spectech 128 2x

thank you

 

[engjohn]

Sounds like you have the right stuff, what were the temps, and you are usig arctic silver right?

 

[gambler]

i didnt to remember the temps but i remember it downer than 40 celcius (20 until 37 celcius)
yes i using artic silver , if i dont wrong its made by asus indonesia.

 

[engjohn]

What I would try is a little "Burn in". Also, try removing everything else in the computer so that it is only the CPU, RAM, HD and Video card. This will help in isolating if it is a CPU issue or an pci card issue. I see that on some of the boards you could only set the voltage to 1.8. Hmmm, My celeron needs 1.95 on my BE6-II to get over 1Gig.
Burn it in for a couple of days and maybe you will get lucky and it will run at a gig at a lower voltage (1.75 - 1.85)...
I am running out of answers, maybe someone else knows what might be happening...

Good luck..

 

[gambler]

[when i try it, in the motherboard socket just have agp card , memory and the harddisk. only that.
thank you