- Joined
- May 6, 2003
- Location
- Buried in UPS packages
Ok here are the settings I have and what they say. Any help on what is what and what it should be set to for good performance. I have 1 stick of 512 meg of Crucial 3200 DDR.
CAS Lat - 2.5
Bank Interleave - 4 Bank
Precharge to active (Trp) - 3T
Tras Non- DDR400/DDR 400 - 7T/10T
Active to CMD(Tred) - 3T
DRAM Burst Length - 4
DRAM Queue Depth - 4 Level
DRAM Command Rate - 2T Command
I took those right off my BIOS so let me know what each does please. I did some forum searching but didn't find anything that seemed to help. Thanks.
CAS Lat - 2.5
Bank Interleave - 4 Bank
Precharge to active (Trp) - 3T
Tras Non- DDR400/DDR 400 - 7T/10T
Active to CMD(Tred) - 3T
DRAM Burst Length - 4
DRAM Queue Depth - 4 Level
DRAM Command Rate - 2T Command
I took those right off my BIOS so let me know what each does please. I did some forum searching but didn't find anything that seemed to help. Thanks.