Help with D815EEA

[GmTr]

Ok guys, I tried doing a search for this but couldn't find anything, so here goes. I have an Intel D815EEA with a PIII 800 that I want to overclock. When I try to use Softfsb or CPUBoost it says "cannot get SM base address". Also I don't have my motherboard book handy and have no idea what my pll manufacturer is. Where can I get this information from?? Is it especially difficult to overclock with this board?? Any help would be great, thanks.

 

[klosters64a]

Intel made mainboards are classicly impossible to overclock. You'd think an i815e would depart from this rule of thumb--'fraid I can't tell you if this still holds true.

 

[DocClock aka MadClocker]

Usualy you can identify your boards maker by the bios string at the lower left side of the screen durring bootup, and you write this string down,,(might take a few restarts to get it all) and go to the bios makers website, and you should find a link to identify your board.
Hope this helps

 

[GmTr]

Ok I found my PLL, it's ICS 9250BF-28. I thought I was making progress but I checked SoftFSB and cpucool and neither have this PLL. Now what do I do?? Am I stuck?