Help with OCing my XP2100

[Mattlock]

Here's my current Rig (about a year old now)

8rda+
XP2100 revB week 0248
Thermaltake SLK-800, with SmartanII
1x512mb Corsair XMS 3200 low latency RAM
Zalman Heatsink with 60mm fan on Northbridge
Antec 430 trupower

Current at 12.5x 187fsb = 2,337 (stable)
Temp. 43c load
Voltage: 1.85v
Vdimm: 2.77
Ram Timings: tried 5,2,2,2 and 6,3,3,2 (don't really undersand which is better to be honest)

I dropped thh multiplier to 11 and tried to get my FSB up to 190 but it wont boot.

I am dissapointed that my expensive corsair won't get to 200fsb.
Why did I pay so much $$$ if I cant get beyond 187??????

My goal is to get to 12x200 = 2,400 but it doesnt look good.

Any ideas?

Mattlock

 

[FlailBoy]

Saw this a while ago. Should be able to run that mem at stock volts up to 200. If it's a memory issue...??

http://www.ocforums.com/showthread.php?s=&threadid=212428&highlight=corsair

Check out my sig. I'm kind of a wuss when it comes to voltage; but 2100B, 0248, and your volts/cooling-you have a good shot at ~2300+ stable no problem.

I don't own an Nforce2 board; but check out a few threads on memory timings. Consensus out here seems to be that you should set that first number to 11.

 

[Mattlock]

Saw this a while ago. Should be able to run that mem at stock volts up to 200. If it's a memory issue...??

http://www.ocforums.com/showthread.php?s=&threadid=212428&highlight=corsair

Check out my sig. I'm kind of a wuss when it comes to voltage; but 2100B, 0248, and your volts/cooling-you have a good shot at ~2300+ stable no problem.

I don't own an Nforce2 board; but check out a few threads on memory timings. Consensus out here seems to be that you should set that first number to 11.

thanks Flail...I'll give it a try