How can I overclock my ECS k7s5a mobo

[deadpoet]

Need help with OC my AMD 1700+.

How can I increase the Speed of the processor by overclocking the CPUFSB or something else !!!

H E L P !!!

(It was easier with my MSI board)

 

[UnseenMenace]

Perhaps a good starting point would be to read your manual in detail and the beginners guides on the front page which should provide you with the all the information and risks involved with overclocking

 

[Greg M]

http://forum.oc-forums.com/vb/showthread.php?s=&threadid=59502

 

[deadpoet]

got it

 

[PDL]

You better stay with the MSI board. These ECS mainboards are WAY TOO ADVANCED for you!

 

[maxima88]

lol

 

[deadpoet]

You better stay with the MSI board. These ECS mainboards are WAY TOO ADVANCED for you!




Yeah THEY ARE -REALLY!!!- TOO ADVANCED FOR ME

NOW LISTEN

AMD 1700+ running @ 1700MHz
2*150 MHz FSB

got Questions ...

 

[deadpoet]

Perhaps a good starting point would be to read your manual in detail and the beginners guides on the front page which should provide you with the all the information and risks involved with overclocking

THX a lot my master... Not everyone could be as good as you...

 

[maxima88]

Deadpoet, what's your multiplier set at?

 

[PDL]

2*150 MHz FSB

Why... it's set to 2 of course!!

Wonder which bridges he cut to get that????

 

[maxima88]

Wonder how he got to 1700mhz using 297mhz/294mhz
I've never seen 143.5fsb before.
(?)

 

[PDL]

Could that be the OC for the RADEON vid card???

 

[deadpoet]

multiplier:
as far as i know 11

THE OC 297/294 is my radeon card. chip and ramdac

good program to overclock a radeon card is
using the radeonater ver. 1.5

get it at www.computerbase.de

there you'll get a optimized driver for radeon 7500/8500 cards,too

 

[maxima88]

You better stay with the MSI board. These ECS mainboards are WAY TOO ADVANCED for you!

Yeah THEY ARE -REALLY!!!- TOO ADVANCED FOR ME

NOW LISTEN

AMD 1700+ running @ 1700MHz
2*150 MHz FSB

got Questions ...

If your multiplier is at 11x and fsb at 150mhz, then your running at 1650mhz, not 1700mhz.

 

[deadpoet]

If your multiplier is at 11x and fsb at 150mhz, then your running at 1650mhz, not 1700mhz.

you're right. Now im running with 11

got a tool to get it @ 1700Mhz but it destroyed my windows!!! and got drive problems.

Don't know why.

now running @ 1613 Mhz with CPUFSB

 

[maxima88]

That's what I'm at too (146.7mhz). Running very stable but
can't post at 150mhz no matter what I do.

 

[LoRDhYpNOs]

Ya I Get The Same Problem.Im Pretty Sure It Has To Do With The Inabiltiy To Adjust The Voltage.

 

[maxima88]

Did the Vcore mod and upped my vcore to 2.01. still locks up at 150fsb. I think I'lll upgrade to pc2700 and hope that solves my problem.