• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

How fast have u got ur 2200+?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

MDA

Member
Joined
Sep 8, 2001
Location
In the Dark!!
Sorry mate but fsb 150 x multiplier 12.5 = 1875!

Mines at 1.95 (177 x 11)

AIRGA 0234 FPAW

MDA.
 
Last edited:

Seal

Member
Joined
Aug 14, 2002
Location
London
Im on 185 x 10.5 = 1942.5MHz. I'm having a LOT of trouble getting any further.

vcore = 1.725
vdimm = 2.75

AIRGA0233RPBW
9

(what do all those numbers mean!? - especially the RPBW and the first number of the next line)

What are your voltages?

Seal
 
OP
=[8c0re8]=

=[8c0re8]=

Member
Joined
Jul 8, 2002
Location
Where Da Big Budz Grow!
seal said:
Im on 185 x 10.5 = 1942.5MHz. I'm having a LOT of trouble getting any further.

vcore = 1.725
vdimm = 2.75

AIRGA0233RPBW
9

(what do all those numbers mean!? - especially the RPBW and the first number of the next line)

What are your voltages?

Seal

Voltage settings

[email protected]
[email protected]
[email protected]

as far as i know "02" is the year an "33" is the week

"9" is said to be a faily good overclocker which mine is to.

as far as those numbers go heres a borrowed line from da

"Coolest:)"


AXxx00 means you got AthlonXP w/ PR of xx00+.
D, unsure, might be package type (Organic packaging).
M means the vcore, S = 1.5, U = 1.6, P = 1.7, M = 1.75, N = 1.8
S means the max case temp (b4 the CPU begins its frying), Q = 60, X = 65, R = 70, Y = 75, T = 90, S = 95. I'm not sure about the Q through Y tho, never saw them in use.
3 means the amount of L2 cache the proc will have, 1 = 64KB, 3 = 256KB.
C means the FSB speed, B = 100MHz (200FSB), C = 133MHz (266FSB).

feel free to correct me if im wrong...hope this helps:)
 

Bruno

Member
Joined
Dec 26, 2000
Location
Location: Location:
The question is:

Are there any 2200 B versions out there? Do they clock like the 2400's ???

And...

Are the new lower speed Tbeds just flunky 2200's?

Hmmmm???
 
OP
=[8c0re8]=

=[8c0re8]=

Member
Joined
Jul 8, 2002
Location
Where Da Big Budz Grow!
I wonder how far this chip would go water cooled?..

Right now its by my A/C with the cover on an 4 fans [1 120mm and 3 antec 80mm fans] getting average 49-51c full load.
If i take the cover off the temps drop ALOT.

Right now im just trying to dail in everything with this MB an find the best settings. So far i scored 13117 with this MBan vidcard
My best so far is 13650 with my MSI KT3ULTRA ARU and a [email protected] with the same card.
 

The Coolest

Senior Member
Joined
Jul 29, 2001
Bruno said:
The question is:

Are there any 2200 B versions out there? Do they clock like the 2400's ???

And...

Are the new lower speed Tbeds just flunky 2200's?

Hmmmm???

There are no 2200+ Tbred B's out yet. and the lower end tbreds are so far Tbred As, but they seem to hit about same speeds as the 2200+s do so i'd go for one of XP1700+ tbred rather than an XP2200+, which will prolly get you close to same speeds as the 2200+
 

hallen

Member
Joined
Dec 18, 2001
Location
Prattsville, NY
Bruno said:
The question is:

Are there any 2200 B versions out there? Do they clock like the 2400's ???

And...

Are the new lower speed Tbeds just flunky 2200's?

Hmmmm???

There will be 2200 "B"'s but it will be a while. 1800 "B" should arrive first.

cpu681.jpg


edit: My 2200 can do 9.5 X 206 = 1993 on the Seti Benchmark .

But for normal 24/7 I run it at 10.0 X 193 = 1930.
 
Last edited:
OP
=[8c0re8]=

=[8c0re8]=

Member
Joined
Jul 8, 2002
Location
Where Da Big Budz Grow!
yes the high voltages r needed for stability. @ least for me it is:)

an yes i have to update my sig the other chip i was using was a [email protected][AGOIA 0205 Y] but have since got hold of 2200+ so
im trying out this chip to see wat i can get on air..
 

Seal

Member
Joined
Aug 14, 2002
Location
London
I just overclocked it again today because i want the most out of my system as is possible, i'm currently on:

185x10.5 = 1942.5
vcore = 1.775
vdimm = 2.85

stable (prime95)

I think thats the max it will go on the current air cooling setup, i plan to upgrade to watercooling soon so hopefully will be able to break the 2ghz barrier.

I also did try 2GHz today, a number of different mult x fsb combinations. I would boot but it wouldnt pass prime95.
 

Seal

Member
Joined
Aug 14, 2002
Location
London
Im using an Abit KX7-333. Yeah i think it can go to 1.850v but its getting a bit too hot for me at about 1.775. (around 52ish deg c)
 
OP
=[8c0re8]=

=[8c0re8]=

Member
Joined
Jul 8, 2002
Location
Where Da Big Budz Grow!
yea i know what u mean about those temps..

was looking into getting bigger hsf for all my systems but bought

a 15000btu kenmore A/C instead..laf. but the up side in now ALL

my comps stay cool in my room now. temps droped ALOT after i

got the A/C. [[email protected] after letting q3 run for 5hours]