I810 chipset M766lmt Motherboard, dual cpu

[Colin Mc Donald]

I have the mobo M766lmrt..i810 chipset dual cpu. currently..350mhz(slot 1) ...The bios says it will support up to 533mhzsocket 370 PPGA, 66/100mhz fsb. date 07/15/95
62-0702-009999-00101111-071595-000000 ...I have updated the bios, now states it will take 850 celleron... I removed the slot 1 350mhz and placed celleron 800... there is no mention of jumper or use of terminator card to enable 370. but celeron 800 no boot. I replaced the slot 1 350 boot ok? does anyone know how I can get 370 to boot?

input appreciated
Colin

 

[Wookie8662]

Yes, there is a jumper on the MB that tells the board to use the CPU in either Slot 1, or the 370 socket.

Here is a good site to get you started on your journey:
http://www.stud.fernuni-hagen.de/q3998142-bin/cgi-bin/Ultimate.cgi

Have fun!

 

[Colin Mc Donald]

m766lmrt

no jumper to switch slot1 slot 370 :{

 

[Wookie8662]

If your board is somewhat like mine, it will only support a 100Mhz FSB speed in the Slot, not the socket.

It will run 66Mhz in the socket only, the slot will run 66/100 Mhz.

If thats the case, you will need to get a slotket for the CPU.

 

[Colin Mc Donald]

M766lmrt with Slotket @800 100 FSB

this board allowed me to used the slotket and 370 celeron 800 with fsb @100mhz
hope that this info helps some one in the future :}
Colin