If you own a Radeon X300-X800 POST HERE!

[henesse]

Card: x800 XTPE
Bus: AGP
Manufacturer: Sapphire
Clock: 656/630
BiosMod: N/A
PipeMod: N/A
Volt Mod: YES
Ram Type & Rated Speed: Samsung 1.6
Cooling: PolarFlow TT with 260w peltier
Temps: 28/54
Note: 1.70v

I dont keep this clocks all the time.
Just at LAN games to show off.
very stable.

 

[JCLW]

******************************
J's reminder - Updated to this point.
Posts above this one may be deleted.
******************************

 

[RAMMAN]

hey jclw, update the table with my new core/memory speeds (see sig .) that will leave just about everyone not running at xtpe speeds or higher in my dust .amazing what loosening a timing can do .

 

[bobmanfoo]

update: my vmodded clocks, just did vdd vddq mod and am clocking 680/650

 

[Jimbob7]

Card: ATI Radeon X800 Pro Power Colour
RAM: 256MB Samsung 1.6
Clock: 595/580
BIOS Mod: No
Pipe Mod: No
Volt Mod: No
Cooling: stock
Temps: 36/59°C

Updated 120506

 

[NeoXed]

Card: X800 XT Pe
Bus: AGP
Manufacturer: MSI
Clock: 520/560
BiosMod: nope
PipeMod: nope
Volt Mod: nope
Ram Type & Rated Speed: Samsung 1.6
Cooling: Stock
Temps: 35/58

 

[Scroatdog]

Card: X800 XT (VIVO)
Ram: 256
Bus: AGP
Manufacturer: Sapphire
Clock: 550/567
BiosMod: N/A
PipeMod: N/A
Volt Mod: No
Ram Type & Rated Speed: Samsung 1.6
Cooling: Danger Den Maze 4 GPU (no memory RAMSINKS yet....)
Temps (idle/load): 37/50


.......VERY disappointed in the overclocks. Thought I'd do alot better , at least with the core, since I'm watercooled. Getting wluk's heatsinks this week and wil install them on the memory.

I'm faitly sure I've got good contact between the core and the waterblock,
Read a few postings here.... but..... do you think my clocks are way off (i.e. too LOW.....)

Please let me know. I've had this card for an hour..

 

[T1Cybernetic]

Card: X800XT/PE
Ram: 256MB
Bus: AGP
Manufacturer: MSI /ATi
Clock: 580/610 - Max "so far" but Solid as a rock and still going strong!
BiosMod: N/A
PipeMod: N/A
Volt Mod: N/A But looking into that tonight!
Ram Type & Rated Speed: Samsung CG16
Cooling: Stock air cooling with "alot" of carefully placed case fans!
Temps (idle/load): 30/50

"EDIT"
Plenty more where that came from when i sort out some better cooling and
maybe if needed some more voltage running to core and maybe memory, .

 

[ropey]

Card: x800Pro Vivo
Ram: 256
Bus: AGP
Manufacturer: Sapphire
Clock: 520/560
BiosMod: YES/XT-PE
PipeMod: YES/16P
Volt Mod: NO
Ram Type & Rated Speed: Samsung 1.6
Cooling: Stock
Temps (idle/load): 37/68

:Edit

Burned in with 3dMark2001se Nature at 100 passes.
Now running at 560MHz Core / 1200MHz Mem clean.
Pulled heatsink off and applied AS5.
Temps (idle/load): 38/72

:End Edit

 

[mysterfix]

Card: X850XT
Ram: 256
Bus: AGP
Manufacturer: ATI
Clock: 597/630
BiosMod: N/A
PipeMod: N/A
VoltMod: No
Ram Type & Rated Speed: Samsung 1.6
Cooling: Maze4 watercooling
Temps (idle/load): 28c/36c

Edit: I got a new card, this one clocks way better than my old one, no volt mods needed on this one!

 

[ket]

X800XL
256MB
PCIE
Sapphire
stock 400\492
OC 438\567 (so far)
Samsung 2ns
Arctic Cooling VGA X800 series cooler

 

[Streifenkarl]

Sapphire X800XT PE ViVo, AGP, no voltmod, stock speeds with overdrive (526/560MHz), Samsung 1.6ns, ATI Silencer

 

[MassiveOverkill]

Did you want X800XL's as well? If so, here ya go:

Card: X800XL
Ram: 256
Bus: PCI-E
Manufacturer: Rosewill
Clock: 459/518
BiosMod: stock
PipeMod: N/A
Volt Mod: No
Ram Type & Rated Speed: 2.0
Cooling: Watercooling Kingwin modded AWC-1 and Zalman Al ramsinks
Temps: 37/50

 

[RangerXLT8]

Card: X800Pro VIVO
RAM: 256
Bus: PCI-E
Mantufacturer: Sapphire Technologies
Clock: 523\495 Solid and still going.....
BiosMod: N\A
PipeMod: N\A
VoltMod: no
Ram type & rated speed: Samsung GDDR3 2.0ns
Cooling: Zalman VF700-Cu w\ Zalman Al Ramsinks
Tempts: Idle\Load ---->33c\52c

 

[The Unforgiven]

Card: X800 Pro
Ram: 256
Bus: AGP
Manufacturer: Sapphire
Clock: 546/525
BiosMod: N/A
PipeMod: N/A
Volt Mod: No
Ram Type & Rated Speed: Samsung 2.0
Cooling: Stock with fan speed set to 100% via ATITool
Temps (idle/load): Don't know.

 

[SH64]

Card: X800Pro
Ram: 256MB DDR3
Bus: AGP 8x
Manufacturer: MSI
Clock: 480/500
BiosMod: XT-PE
PipeMod: Success (16)
Volt Mod: No
Ram Type & Rated Speed: Samsung 1.6ns
Cooling: stock X800Pro cooler
Temps (idle/load): ~40s/60

-------------------------------------------

Card: X800Pro
Ram: 256MB DDR3
Bus: AGP 8x
Manufacturer: Sapphire
Clock: 520/570
BiosMod: XT-PE
PipeMod: Success (16)
Volt Mod: No
Ram Type & Rated Speed: Samsung 1.6ns
Cooling: Sapphire Toxic cooler.
Temps (idle/load): ~45/65

 

[Muppetmower]

Card: X300
Ram: 128MB
Bus: PCI-e
Manufacturer: ATI
Clock: 510/460@3D, stock@2D
BiosMod: N/A
VoltMod: N/A
Ram Type & Rated Speed: Samsung (don't know speed)
Cooling: Kingwin KWVC3 VGA Cooler
Temps(idle/load) No temp monitoring onboard the videocard.

 

[WA2]

Card: X800XT/PE
Ram: 128MB
Bus: AGP
Manufacturer: ATI
Clock: 693/648
BiosMod: N/A
VoltMod: Yes
Ram Type & Rated Speed: Samsung (don't know speed)
Cooling: H2o
Temps(idle/load) No temp monitoring onboard the videocard.

 

[agentbad]

Card: ATI Radeon X800 Pro (BBA)
RAM: 256MB Samsung 2.0
Clock: 565/565
BIOS Mod: No
Pipe Mod: NA
Volt Mod: No
Cooling: stock
Temps: 36/65°C

 

[HousERaT]

Card: Radeon X800XL
Ram: 256
Bus: PEG
Manufacturer: Rosewill
Clock: 450/570
BiosMod: N/A
PipeMod: N/A
Volt Mod: Not yet
Ram Type & Rated Speed: Samsung 2.0
Cooling: Air - ATI Silencer 5 Rev2
Temps (idle/load): 33/50