dorkaholic
New Member
- Joined
- Dec 21, 2020
Hey there, I just wanted to share and get some feedback on my most recent builds overclock. After spending some time googling i realized that for once i have something so new it is not overly well documented of people trying to ruin their warranties. Maybe you fine folks can help me make sure I don't **** up too bad.
Some of the specs-
MPG Z490 GAMING EDGE WIFI -msi
intel 10700k all core 5.16ghz
corsair vengeance LPX v3.2 @3600mhz 32gb
gtx 1070 8gb
256 m.2 ~17.5tb storage
650w psu
now for some bios settings
core voltage is at 1.35 in bios- runs about 1.374 in xtu
core ratio is at 52
ring or cache is at 48
temps topping out at 82-3c while mining for 3ish hours. - using a hyper 212
Does this all seem safe enough to be left on all the time? the toughest load i put on this computer will be some gaming and mining on a couple of old graphics cards when not in use(electric is factored in my rent- i understand that it is not "profitable")
Some of the specs-
MPG Z490 GAMING EDGE WIFI -msi
intel 10700k all core 5.16ghz
corsair vengeance LPX v3.2 @3600mhz 32gb
gtx 1070 8gb
256 m.2 ~17.5tb storage
650w psu
now for some bios settings
core voltage is at 1.35 in bios- runs about 1.374 in xtu
core ratio is at 52
ring or cache is at 48
temps topping out at 82-3c while mining for 3ish hours. - using a hyper 212
Does this all seem safe enough to be left on all the time? the toughest load i put on this computer will be some gaming and mining on a couple of old graphics cards when not in use(electric is factored in my rent- i understand that it is not "profitable")
