-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
Interesting fan...
- Thread starter FishDog3
- Start date
W
William
Guest
yes, does anyone have any cfm ratings on these things?
Hi guys,
Don't know the specs on the Shack blower, going to stop in at the local one today, I'll see if they carry that blower and get some spec's. FYI the Shack use to stock the Nidec Gamma series DC Blowers, here's the link on the Gamma's with spec's might help to determine if it's woth the purchase.
I currently use a Gamma 28 for spot cooling, works great, quiet, lot of possibilities, try to post back ASAP with the Shack blower specs.
Don't know the specs on the Shack blower, going to stop in at the local one today, I'll see if they carry that blower and get some spec's. FYI the Shack use to stock the Nidec Gamma series DC Blowers, here's the link on the Gamma's with spec's might help to determine if it's woth the purchase.
I currently use a Gamma 28 for spot cooling, works great, quiet, lot of possibilities, try to post back ASAP with the Shack blower specs.
FishDog3
Sorry about the bum link, I used search, typed in Nidec Gamma 28, selected the link, it let me right in, didn't have to use, no user name or pass word, I'm not registered on that site. Tried again while typing this reply access denied. Sorry again, I do Know the Gamma 28 puts out appox. 9 cfm, the Gamma 30 25 cfm. http:www.plycon.com carries the Gamma 30 blower.
Sorry about the bum link, I used search, typed in Nidec Gamma 28, selected the link, it let me right in, didn't have to use, no user name or pass word, I'm not registered on that site. Tried again while typing this reply access denied. Sorry again, I do Know the Gamma 28 puts out appox. 9 cfm, the Gamma 30 25 cfm. http:www.plycon.com carries the Gamma 30 blower.
OP
- Joined
- Jul 3, 2001
- Thread Starter
- #6
noworries,just letting you know about it.
Mostly I want to find out some specs on this bower. I was thinking that using a blower/blowers for case ventelation would bebetter than fans as they produce "good air" as per hoots article.
Mostly though I cant resist screwing around with stuff and these look like little aluminum toys begging to be messed with.
Mostly I want to find out some specs on this bower. I was thinking that using a blower/blowers for case ventelation would bebetter than fans as they produce "good air" as per hoots article.
Mostly though I cant resist screwing around with stuff and these look like little aluminum toys begging to be messed with.
FishDog3,
Try this link for Nidec some info on blowers, Japan site english version.
Try this link for Nidec some info on blowers, Japan site english version.
