• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

is 0.38v bad voltage from mbm5?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.


Mar 24, 2002
heres my specs. 300 powertech psu and my readings are


see anything wrong???i have 8 fans .ranging form 92 to 60. a blue neon light sound activated and a ultra violet cold cathode.geforce 2 ti..thanks for your help

psu is a powertech pt-300atx 165watt total+3.3 &5.0

motherboard is a msi k7t turbo
athlon xp +1700 (not overclocked)
pc 133 mem 1 stick 256 +1 stick 128
geforce 2 ti 2742 drivers
sound blaster live 5.1
ethernet card (kingston)
40 gigger maxtor harddrive
sony 8 x's cr-writer
acer 52 x's cd -rom
thermal take drtagon orb 3
1/ 12 inch neon with sound sensor
1/10 inch uv cold cathode light (fans are modded with glow in dark stickers.give a cheaper led fan mod apprerance.please some one fix my beoch...

Wonko The Sane

Dec 16, 2001
Port Richey, FL
I'm not familiar with that board. is it a dual processor board? if so are you using 2 processors? if you are only using 1 processor in a dual board core 1 will be very low (because there is nothing to pass the voltage through). if it's not a dual board, you can probably ignore the core 1 reading, although it might be interesting to find out where it is coming from. if you have 2 processors, then you may need a more powerful PSU. I've seen this on my board (bp6 with dual celeron 400's) and when i got a different PSU, it read fine.