• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Is my ps adequate for this setup?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

dicecca112

Member
Joined
Feb 25, 2004
Location
MA, USA
assuming if a standard 120mm radiator would fit: 172x124x50mm centered at the 120mm fan hole (go and measure);

1. get the thermochill HE120.1 radiator from dangerden.com $85; don't forget the 1/2 barbed 3/8-bsp thread fittings $5

2. get the *TWO*CSP 750 pumps from dtekcustoms.com $72

http://www.dtekcustoms.com/index.as...PROD&ProdID=140

3. get the TDX block from dangerden.com with the brass top and 1/2 barbs, OR get the MCW6002 from a retailer that sells swiftech; TDX is should be a bit less restrictive $45-60?

4. you need: 10ft of clearflex hoses; see the usplastics people, GOOD antifreeze; see your local automall, and also one of these: http://www.dtekcustoms.com/index.as...PROD&ProdID=130

and 120mm fans for the radiator, distilled water (aquafina at the grocery store, MUST BE AQUAFINA, NOT MINERAL WATER), and quite a few zip ties