Jetway 663 AS motherboard BIOS update problems

[David]

The BIOS update 663asa06.bin, for the 663as and 663as pro motherboards has given me some problems. The A05 update reports the Vcore @
1.55 volts approx, and the 12V value at between 12.00 and 12.05, for example. When I used awdflash
(awdflash 663asa06.bin /sn/py/cc/r I think) It installed OK. When I booted up it reported the Vcore at 1.89Volts, and the 12V value at 13.48v! I 'flashed back' to the A05 BIOS and everything was fine. I had also had problems with the A06 in WinMe - restarting instead of suspending, and not going onto suspend mode properly. I had checked all BIOs settings. anyone know what was wrong?

Thanks

Jetway 663AS Pro motherboard
Duron 650 @ 6.5 x 100
128MB PC133 RAm
30GB Seagate Barracuda HDD
Windows Me 4.90.3000
GeForce 2 MX AGP Graphics.

 

[Avg]

Did you figure that out?



















Sorry just had to do it, can't never let a thread go without a reply.

Please don't ban me, can't get any sleep.