• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

just got cable... need to route it

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

nerd4life

Member
Joined
Apr 18, 2001
Location
Houston, Texas
ok,

i looked through the forum and didnt see this question already asked.

i just got roadrunner today but only had them install for one computer so they brought me a cable modem. do any of u use roadrunner and if so can i go buy the cable/dsl router netgear makes ( model RP114 ) so i can route all the computers in my house??

if i do this, how hard is it to setup the router to connect to roadrunner??

thx
 
nerd4life said:
ok,

i looked through the forum and didnt see this question already asked.

i just got roadrunner today but only had them install for one computer so they brought me a cable modem. do any of u use roadrunner and if so can i go buy the cable/dsl router netgear makes ( model RP114 ) so i can route all the computers in my house??

if i do this, how hard is it to setup the router to connect to roadrunner??

thx
I have a linksys 4 port but they are all pretty easy to set up .every thing you need to know should come in the direction..should be up and running in a half hour or so..
 
yes! u certainly could run a router to share the cable modem w/ all ur machines. (well, who don't?!)

and i have a Linksys wireless AP + Router w/ 4 ports Switch. they are fairly easy to setup even if u r not in networking field.

basically, just enter the exact same info in ur PC's network setting to the router's setup page (mostly web base). and set all ur PC to obtain an ip address, so that it will look for a connection (from the router) instead of trying to use it's own.

good luck, and happy browsing w/ ur cable. ;)
 
yup linksys 4 port router here too, bascally just plug and play. Also just enter the host name and domain name given by the isp, and presto!! :D
 
All of this information was easily available in my sticky at the top of the forum. You could have saved yourself a bit of time by reading that first.;)
 
I have a small question:

It's the wall-plug > cable (ADSL in my case) modem > router > PC

OR

Wall-plug > router > PC ?

I mean : do you need to have a modem between the router and the network or just a router?
Thanks
 
Back