K7S5A Fully Modified - Walkthrough with Pics

[RPM_Computing]

A worthwhile read for anyone with a K7S5A or looking to purchase one for overclocking purposes.

http://www.ocworkbench.com/hardware/elite/k7s5amod/k7s5amodp1.htm

Enjoy!

 

[DeathScyth_Hell]

That looks complicated...

 

[maxima88]

The vmod is very easy. In fact, I did this mod last year and even went one step further with it where I included a pot so I could vary my vcore from 1.75 to 2.2v~.

 

[james.miller]

yeah i still need to mod mine - my vcore is too low at 1.72v. thats lower than standard

 

[Wraith]

I want to...but im to scared of fryin my proc the extra heat will prolly be to much for my frickin radiator ne way, weak arse black ice micro..... *grumble*

 

[PDL]

This project went well!
Used a 50k Ohm cermet w/10k Ohm resistor for the vcore mod.
The tri-state switch block is for the 'Multi-lite' multiplier mod.
Tested multipliers 9 thru 14 and all is well.
Vcore gives a range of 1.82 to 2.01 volts.