K8N Neo-FSR will not POST

[air_power]

Hello everyone. I have just got a new case and transfered all of my hardware into it and now my computer will not post further than detecting my cpu. I have attached a photo I took of how far my machine boots up to and just hangs.



I have tried moving everything back into my old case but still same problem persists. Has anyone else had this problem before? Can anyone help me out? BTW there are no beep codes...

My specs are:

Mobo: MSI K8N Neo-FSR nForce3
CPU: AMD Athlon 64 3200+
HDD: WD Raptor 37gb / WD 160gb
Mem: 3x 1gb Kingston Value PC3200
Video: Leadtek 6800LE
Power Supply: Generic 450w

 

[Valk]

try reseating your heatsink. maybe you banged it when migrating

 

[air_power]

try reseating your heatsink. maybe you banged it when migrating

Thanks for the response. I have tried reseating it, adding new thermal compound, still does the same thing. I've also booted to the bare minimum to isolate the problem to include just the following items: Power Supply, Video Card, 1 stick of RAM, keyboard, mouse, monitor, and no hard drives - still will not get past the POST. Cleared the CMOS and all. Someone also recommended to check my fron panel USB wires, however I did not have those connected at the time of the test. Maybe its time to move onto a new mobo? See the thing is I dont even know if its the CPU or Mobo...