• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

KEEP X800pro or FLASHED X850 PRO?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

chris64

Disabled
Joined
Dec 10, 2004
Location
earth
Just got my hands on a x850pro and it flashed right out of the box to xt pe and runs at those speeds perfect.The new card clocks to about 550/625 right out of the box. Havent voltmodded it yet prob gonna do that tomorrow.

Now my previous card is a x800pro that clocks like a mad dog right up to about 640 core and 621 memory but its only 12 pipes.

Im assuming that after i volt mod the nw card it will probably see about 30 more mhz on the core and a whole lot more on the memory.

SO which card should i keep???????
 
Jsut raised the VGPU to about 1.6 and core went right up to 607.

Im pretty much set on keeping this card now. Gonna go for more voltage and see where she gets up to.
 
Yea my roomate sold his 9600xt and now he wants the X800. He just has to buy a psu first.

Raising the vgpu on this card is extremely hard. I jsut about wore down the little contacts drawing on them so much. But i got it at about 1.74 now and it only went up to 630.

Do u think 1.74 is pushing it?? Temps at load are about 51
 
card is on pretty good water setup. Temps get to around 51-52 full load.
 
Dang, smoked my old XT PE handily...as I said before, the 850's like voltage more and your temps are perfectly fine. Think you'll be all right running as you are.
 
im gonna do the memory volt mods here in a lil bit. Gotta find a pencil sharpner first.

I actuall got the core pretty stable now at around 638!!!! I didnt have the block on just right. I think we have another super card here possible. I cant believe i got almost 100 mhz core from a voltmod alone!!! I think the memory is gonna be the real performance winner. I does 620 stock volts!!
 
Back