kt7 bios?

[pear]

I flashed my Kt7 board with the A9 beta bios (by Oc Master) and it recognized my XP chip but as a 1200mgz . I cleared CMOS and rebooted and still won't post as a XP1900. Any ideas?

 

[Sonny]

Welcome To The Forums!!!!!

.....and to the addiction

Your running the 12X multiplier with a 100MHz/200FSB but since you have a KT133 I doubt that it will run at its real clockspeed because you can not run a 133MHz/266FSB.

 

[pear]

So if the multiplier was 15x, then I would be able to hit 1500mgz, okay I understand what your saying. Does anyone know what the 12xabove means compared to 12x mutipliers with the a9 bios?

 

[Tmod]

pear

The 12x Above will get you a muliplier of 13. That will be the highest you will get the multiplier to go.

After that start raising the fsb to see how high it will go.

 

[repo man11]

If you're feeling brave, you could try this http://forum.oc-forums.com/vb/showthread.php?s=&threadid=68983&highlight=abit+kt7e
Too much risk for too little return for me, but you might be interested.

 

[OC-Master]

If you're feeling brave, you could try this http://forum.oc-forums.com/vb/showthread.php?s=&threadid=68983&highlight=abit+kt7e
Too much risk for too little return for me, but you might be interested.

Simply put,

http://www.ocinside.de/index_e.html?/html/workshop/socketa/xp_painting.html


This website should allow your KT7 to breathe a second life


OC-Master