Memory settings on a CUSL2-C i815EP motherboard

[Daniel R]

Ok guys, I just bought & installed a brand new CUSL2-C motherboard. Now, coming from the BX chipset, I have no idea what settings I should set my memory to. Anyone want to take a stab? Below is a listing directly from my memory bios screen.

SDRAM capability PC133
SDRAM operating mode PC100
CAS latency 3T
RAS to CAS 2T
RAS Precharge delay 2T
SDRAM Cycle time 7T,9T
Page closing policy One bank
Video memory cache mode UC 'noncacheable
SDRAM data driving mode Normal

These are the presets, and I am running 128MB of Mushkin HP Rev2 PC133 RAM.

 

[sylor]

Go to this forum http://www.cusl2.com/UltraBoard/UltraBoard.cgi?action=Headlines&BID=1&SID=180844. There are some posts about cusl2-c memory setting.

 

[Daniel R]

Sylor, thanks for the link, I found what I was looking for. Now, another question, do you have any idea why my Leadtek GF2 Ultra drops to 2x AGP at 110mhz fsb and above? at 105mhz fsb, It runs at 4x just fine, but once I up it to 110 it's down to 2x.

 

[sylor]

Well i dont have the board (still waiting... ) with me so i can look at some of the agp settings. Maybe you should create a new thread with Agp problem header so others can look at the problem since they think this is the memory problem. Also the site I posted earlier does some posted about agp problems. Have a look. Good luck.