MSI K7T Turbo and a Tbird 850 help

[Tano]

How could i run this config at 133 FSB? Unfortunatelly my CPU can't bear 8.5*133. Now it runs at 9*113.
I tried to connect the L6 bridges to work as an 750 and run at 7.5*133 but it doesn't work. I read this solution at Anandtech. Can anybody tell me a way to solve this problem?

 

[Tiger]

Tano (Jun 19, 2001 02:12 p.m.):
How could i run this config at 133 FSB? Unfortunatelly my CPU can't bear 8.5*133. Now it runs at 9*113.
I tried to connect the L6 bridges to work as an 750 and run at 7.5*133 but it doesn't work. I read this solution at Anandtech. Can anybody tell me a way to solve this problem?

You may have the dreaded MSI K7T post problem. I would suggest the following;
Set your multipliers and vcore in the bios -
F10 to save -
Save -
Cut the power via the case switch -
wait a second or two and power it back up again.
Watch the speed info to see that it is correct. (7.5x133=1000). If the speed is wrong cut the power again and power it back up again. You should have no probs with this multiplier setting as long as you do not alter it or cut the power to the board. You can alter vcore or fsb without having to cut the power.

 

[Tano]

Thanx, i have a success. I simply put the jumper to 133 FSB and now it's working!! I wonder why it did'n work 1 months ago. Now it's running at 7*145!!