Multipliers screwed up on Asus A7A 266!

[bdf24]

Well I used to be able to adjust all the multipliers and it worked. Now only get 7, 9, & 11? Those are the only options I'll get no matter what I set the dips too.

Any Ideas? what happened. I did update the bios but I put the old one back in thinking it would fix it. but it did'nt.

 

[ken257]

Did you try clearing the cmos? Double check any jumper and switch settings. Check your pencil job if you had to unlock the cpu. I used to have an Asus A7V and it started doing the same thing one day for no reason at all no multipilers over 10.5 would work anymore. I verified th defroseter L1 job by putting the cpu in another board. Also I stuck a factory unlocked 1.2 in the A7V and it did the same thing. I never was able to get over 10.5 working again ever, so I gave it to someone in need with a TBird 800 @ 1102 105x10.5 To this day it still runs 100% stable with these settings but that is the max that the board will run at.

Good luck!

 

[bdf24]

I was planning on clearing the cmos but did'nt have time yet. I hope that fixes it. We'll see.

 

[bdf24]

Well it seems to be working every now and then. I got it back to the multiplier I want so I'm good for now. I did just take off my waterblock. Maybe it was touching something on the cpu just enough to throw off the multipliers.