My 1st LN2 session - AMD Phenom II X6 1100T and AMD FX-8150

[BeepBeep2]

Thanks to I.M.O.G. for giving me this opportunity

Pay no attention to my HWBOT team

Test rigs:
AMD Phenom II X6 1100T and AMD FX-8150
2x Sapphire Vapor-X HD 5770
ASUS Crosshair V Formula
4GB GSkill Pi Series DDR3-2133 CL7 (PSC)
XFX Black Edition 850w (Seasonic M12 80+ Silver)
Intel X25-V G2 40GB
Windows XP Pro SP3 x86 / Windows 7 Pro x64
K|NGP|N Venom Rev 5.0 Universal mount
50L LN2

Benchmarks: (mixed, some I didn't have time/enough LN2 to run on either CPU)
CPU-Z
Memory Clock
Pifast
SuperPi 1M
wPrime 32M

3DMark05
3DMark06
3DMark Vantage
3DMark11

Photos: (I'll update with more later, these were from yesterday)

Results:

CPU-Z

1100T - 6524 MHz
http://valid.canardpc.com/show_oc.php?id=2323284


FX-8150 - 7253 MHz
http://valid.canardpc.com/show_oc.php?id=2324214

Memory Clock
FX-8150 + GSKill Pi 2133 CL7 = 1332.5 MHz, 2665 DDR
http://hwbot.org/submission/2272552_beepbeep2_memory_clock_ddr3_sdram_1332.5_mhz
http://valid.canardpc.com/show_oc.php?id=2324284

Pifast

FX-8150 - 22.68s - 6824 MHz
http://hwbot.org/submission/2272527_beepbeep2_pifast_fx_8150_22.68_sec
http://img213.imageshack.us/img213/8457/wprimepifast.png

SuperPi 1M

1100T - 10.657s - 6466 MHz
http://hwbot.org/submission/2272286_beepbeep2_superpi_phenom_ii_x6_1100t_be_10sec_657ms

FX-8150 - 12.199s - 7143 MHz
http://hwbot.org/submission/2272534_beepbeep2_superpi_fx_8150_12sec_199ms

wPrime v1.55 32M

FX-8150 - 5.121s - 6824 MHz
http://img213.imageshack.us/img213/8457/wprimepifast.png

3DMark05

Single Card - 1050/1360 - 33228 - 121st
http://hwbot.org/submission/2272283_beepbeep2_3dmark05_radeon_hd_5770_33228_marks

3DMark06

Single Card - 1080/1380 - 21714 - 60th
http://hwbot.org/submission/2272277_beepbeep2_3dmark06_radeon_hd_5770_21714_marks

Dual Card - 1055/1365 - 33543 - 11th
http://hwbot.org/submission/2272287_beepbeep2_3dmark06_2x_radeon_hd_5770_33543_marks

3DMark Vantage - Performance

Single Card - 1060/1365 - 14658 - 44th
http://hwbot.org/submission/2272540...tage___performance_radeon_hd_5770_14658_marks

Dual Card - 1050/1365 - 24903 - 5th
http://hwbot.org/submission/2272548...e___performance_2x_radeon_hd_5770_24903_marks

3DMark11

Single Card - 1055/1370 - 3467 - 30th
http://hwbot.org/submission/2272545_beepbeep2_3dmark11___performance_radeon_hd_5770_3467_marks

Dual Card - 1030/1360 - 6205 - 6th
http://hwbot.org/submission/2266620_beepbeep2_3dmark11___performance_2x_radeon_hd_5770_6205_marks

 

[OptyTrooper]

Nicely done.

 

[TsunamiJuan]

Gratz first ln2 runs are so much fun.

Did it get you hooked?

 

[xsuperbgx]

Good work and congrats on taking the step to extreme cooling.

Also Welcome to OCF!
I have seen you at Xs, you seem to be very active over there. I am sure that we will see more good things from you.
I also see that you are in OH. Did you bench with IMOG? Those are not pics of his garage...

 

[BeepBeep2]

No, he lent me his 50L dewar, I benched in my house

 

[I.M.O.G.]

Nice bunch of results - as I mentioned on hwbot, pretty impressive spread of benches for the first time on LN2. Lots of times the first sessions are spent troubleshooting and learning hard lessons.

I wasn't part of the session, I helped him out on the LN2 front - but with the team difference, my loyalty lies with OCF. Hard to bench together without opening up the book on tweaks and so forth.

Maybe we can do a group session sometime however, when IB drops I may look to do another demo at the Microcenter over here, and its easier with more than one person. He'd have to do it with the Overclockers banner hanging in front of the table however.

 

[TsunamiJuan]

Nice bunch of results - as I mentioned on hwbot, pretty impressive spread of benches for the first time on LN2. Lots of times the first sessions are spent troubleshooting and learning hard lessons.

I wasn't part of the session, I helped him out on the LN2 front - but with the team difference, my loyalty lies with OCF. Hard to bench together without opening up the book on tweaks and so forth.

Maybe we can do a group session sometime however, when IB drops I may look to do another demo at the Microcenter over here, and its easier with more than one person. He'd have to do it with the Overclockers banner hanging in front of the table however.

and a shirt that says "IMOG owns me" ?

 

[I.M.O.G.]

Maybe not that far, but I do have some leftover Overclockers benching T's in his size.

 

[BeepBeep2]

I wouldn't mind that at all.

I just don't think I can switch hwbot teams though due to my loyalty @ XS

Otherwise I don't care who took points or even benching for points really. It is a hobby, while competitive it should be fun too

 

[hokiealumnus]

I wouldn't mind that at all.

I just don't think I can switch hwbot teams though due to my loyalty @ XS

Otherwise I don't care who took points or even benching for points really. It is a hobby, while competitive it should be fun too

Shhh...they'll never know. Honda never looks in threads over here.

 

[TsunamiJuan]

Shhh...they'll never know. Honda never looks in threads over here.

Only when you call his attention to it LOL

 

[Janus67]

Nice bunch of results - as I mentioned on hwbot, pretty impressive spread of benches for the first time on LN2. Lots of times the first sessions are spent troubleshooting and learning hard lessons.

I wasn't part of the session, I helped him out on the LN2 front - but with the team difference, my loyalty lies with OCF. Hard to bench together without opening up the book on tweaks and so forth.

Maybe we can do a group session sometime however, when IB drops I may look to do another demo at the Microcenter over here, and its easier with more than one person. He'd have to do it with the Overclockers banner hanging in front of the table however.

You know that I'd be there! Or you can set it up for the one in cbus

 

[Bobnova]

Shhh...they'll never know. Honda never looks in threads over here.

He's on the list for recruitmentization, too

 

[I.M.O.G.]

Great Janus, glad I can count on you. With something easily going wrong, its a hard thing to do a live event by yourself - with two people, a lot easier to make sure something is running and talk to people, even if one of you are troubleshooting or prepping.

Could do Cbus, but I have the info for up here, I've talked to the guy (he knew about our St Louis event), and its only an hour from me so up here would be easiest probably to put together... I was going to do one for Bulldozer, but never got around to it, and it would have been more trouble than it is now. Now I have all the dewars I would need so its just a matter of driving over and having something cool to bench - IB should fit the bill.

Cbus is only 140 miles for me, but my truck gets 11mpg so that's a 100 bucks round trip at least until I get a tuneup. That doesn't mean it isn't possible, but maybe we could knock out Cleveland first and we can work on the contacts down there.

 

[Janus67]

Haha, fair enough. Sounds like a great time!