• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

My 1st watercooled rig

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

rewind_rob

Member
Joined
Apr 9, 2004
Location
PA
I am waiting on the case and i could not wait so i put the system together. i need to cut the holes for the 120 fans.

anyway here is the system
my_setup.jpg



i am getting 31C at idle and 36C full load..


well i have a question.. sort of.. its a P4 3.0Ghz 1gb of kingston PC4000 DDR and a asus P4C800 i cant seem to get it over 3.600GHz i messed with the voltage but i only took it to 1.6 when i did that it would reboot during 3d2001 for the stress test. anyone have any tips to get this sucker higher?? thanks :attn:
 

Styyn

Member
Joined
May 23, 2004
Location
St. Paul, MN
You should be fine bumping your vcore to 1.65 or 1.675, but after that you're entering the grey-zone for P4's. Your memory timings and GAT/PAT settings could also be a limiting factor here.

Btw, your sig is way, waaayy over the limit ;)