My multipliers are screwy

[Dave65]

When I set my multipliers on 10 or 10.5 it shows 9.5,but the rest work fine,any ideas?
It is unlocked and never has been any problems always worked fine,did I burn up my CPU?

 

[jbslow]

You will probably need to redo the unlock.

 

[Arkaine23]

unlocked?

Sounds like one of the L1's is no longer making a good connection. Start again if you want those mults.

 

[Dave65]

Well I redid it and everything is working except the 10 multiplier..\
but I found one of the pads on my CPU seems to be falling apart,is there a quick fix for this

 

[Arkaine23]

hmmm

Maybe a jeweler could do some micro-soldering for ya. A dab of silver trace paint might work as well.

 

[Dave65]

Im talkng about thelittle foam tab on each corner of the CPU.
In fact that was the problem one closest to the L1 was worn so bad I thing the heat sink may have been close enough to short it out,but anyway it seems to be ok now,I want to thank you guys again for the help,were would I be with out you guys...
Id be throwing a lot of ruined parts in the trash most likely
Thanks guys

 

[Ozzman]

i think super glue would work fine.. or just tape it back.. ive seen in a thg video and they taped their little pad back on in the unlocking a XP video..

or i think u might be able to take all 4 off and buy a shim.. but dont do this first as im not sure how it will work.. just a idea..