• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

New Server build / Home business

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
The 8-pin is 12V_1 and required. The 4-pin 12V_2 is optional. As you have it is perfectly fine. If you have another 4-pin for it, its is a choice to use it. There will be no benefits or harm either way.
 
Last edited:
Wow, it's been a minute! Ok, everything is together, tied up and apparently working. I'd like to put it through a stress test just to see how it does. Any specific one recommended? The ASUS MB has a built in test. I just did 5 min to see if it worked. Says "passed" but I dont see any other data.
 
Finished build pics

- - - Auto-Merged Double Post - - -

ok. I'll download that later tonight when I check to see if the wifi works.
Its so empty inside that case! I don't like the cable management on the back either. Those pwr cables are a few inches short, imo.
 

Attachments

  • 20200929_144548.jpg
    20200929_144548.jpg
    2.2 MB · Views: 32
  • 20200929_143931.jpg
    20200929_143931.jpg
    2.4 MB · Views: 32
  • 20200929_143925.jpg
    20200929_143925.jpg
    2.3 MB · Views: 32
  • 20200929_143919.jpg
    20200929_143919.jpg
    2 MB · Views: 32
  • 20200929_143913.jpg
    20200929_143913.jpg
    2 MB · Views: 32
Thanks. So simple of a build. I also hid the M.2. Drive just for a extra cleaner look.
I do have those SSDs in RAID 1 too. Was pretty simple, Windows 10 does it for you pretty simple.
Is there a free stress test? Last I used was OCCT. I just want something where I can post the results and u guys can see if it's good enough (as a whole). I know on the video portion it will take a hit.
 
Last edited:
Aida trial version is free.

Or prime 95... run blend torture test.

Ok, didn't see this. Right now I'm doing a stress test with the installed Intell version. The AVX or something like that. How long do I run the prime 95?

Ok, noob here... just started Prime 95 on blended torture test. I had to Google this, but it just runs until a fail occurs? How long should I let it run? I mean its a basic build, nothing extreme, so i assume it should work well.
 
Last edited:
I'd run it for a few hours at least.

I domt know what the installed intel version means. You need to run the torture test, blend. Its in the menu.
 
ok, i might have done this correctly. i ran Prime 95 for 4 ish hours. did not see a fail. i included a screen shot of the intel stress test, but again, can't read it! lol.
i think we can call this good and done!
 

Attachments

  • PRIME 95 RESULTS.png
    PRIME 95 RESULTS.png
    40.2 KB · Views: 11
  • PRIME 95.png
    PRIME 95.png
    50.1 KB · Views: 11
  • stress AVX.png
    stress AVX.png
    76.2 KB · Views: 11
Back