Noob here with OC stats, please comment

[race_2005]

Hi all, I'm new to oc'ing & need some tips. Here are the stats for what I've done so far with a Foxconn (I know, I know) 865M01 mobo with Intel 2.53 & Buffalo 512MB ram pc3200 DDR. All I did was max all possible values in BIOS & did a full load test (no errors) for 10 minutes.

Let me know if you have any suggestions, I'm unsure how to up the FSB since I upped the BIOS to current rev. it was supposed to allow you to go at least 200mhz so I dont know whats wrong. Oh yea, I have disabled all non essential items in Bios (USB, IDE2, etc) and am using a Seagate SATA on Master 0 & CDR as master 0 (advanced config). Thx in advance..

PC Wizard 2004 Benchmarks

CPU
-----------------------------
General Information :
Processor : Intel Celeron
Frequency : 3135 MHz
L1 Cache : 16 KB
L2 Cache : 256 KB
Total Memory : 496 MB
Front Side Bus Speed : 165 MHz
Bus Speed : 660 MHz (QDR)

Processor Technology :
MMX : Yes
SSE : Yes
SSE2 : Yes
SSE3 : Yes
x86-64 : No
Hyper-Threading : No

Tests Information :
Instructions SSE, SSE2, SSE3 : 128-bit
Instructions MMX : 64-bit
Instructions 3DNow! : 64-bit
Instructions FPU : 64-bit
Instructions INT : 32-bit
Thread : 1

RAM
----------------------------
General Information :
Model : Intel i865GV
Type : DDR-SDRAM PC3300
Front Side Bus Speed : 165 MHz
Bus Speed : 660 MHz (QDR)
Memory Bus Speed : 206 MHz
Chipset Bandwidth : 5280 MB/s
Memory Bandwidth : 3300 MB/s
Latency : CL2.5
PAT - Performance Accelerat... Enabled

Memory Information :
L1 Cache : 16 KB
L2 Cache : 256 KB
Total Memory : 496 MB

Tests Information :
Instructions SSE, SSE2, SSE3 : 128-bit
Instructions MMX : 64-bit
Instructions 3DNow! : 64-bit
Instructions FPU : 64-bit
Instructions INT : 32-bit
Test : 2 x 64 MB
Prefetch-Block (8 KB) : Yes
Latency Stride : 512
Thread : 1

Cache
--------------------------------------
General Information :
Processor : Intel Celeron
Frequency : 3135 MHz
L1 Cache : 16 KB
L2 Cache : 256 KB
Total Memory : 496 MB
Front Side Bus Speed : 165 MHz
Bus Speed : 660 MHz (QDR)

Processor Technology :
MMX : Yes
SSE : Yes
SSE2 : Yes
SSE3 : Yes
x86-64 : No
Hyper-Threading : No

Tests Information :
Instructions SSE, SSE2, SSE3 : 128-bit
Instructions MMX : 64-bit
Instructions 3DNow! : 64-bit
Instructions FPU : 64-bit
Instructions INT : 32-bit
Thread : 1

 

[Sentential]

Hey not bad at all...

WELCOME TO THE FORUMS!!!
...and please help us cure cancer...FOLD for team 32.

________________

Looks pretty good starting off. Im impressed. So what exactally are you looking for in the way of comments. Anything in specific? Advice? Suggestions? Im at a loss

<subscribed>

 

[race_2005]

Forgot to add..

Additional info (please help me sort it all out!!):
------------------------
CPU: Intel Celeron D 325
CPU ID : F34
Revision : D0
Model : Intel(R) Celeron(R) CPU 2.53GHz
Codename : Prescott
Technology : 0.09µ
Microcode : MU0F3400
NorthBridge : Intel i865GV
SouthBridge : 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
------------------------
Real Frequency : 3135 MHz
Multiplier : 19x
Low/High Multiplier : 14x / 19x
Overclock Locked : No

Front Side Bus Information :
Front Side Bus Speed : 165 MHz
Bus Speed : 660 MHz (QDR)

Initial Frequencies :
Frequency : 2533 MHz
Front Side Bus Speed : 133 MHz

Thermal Information :
Core Power : 99.65 W (approx.)
Throttle : 3135 MHz

Processor Power Management Information :
Processor Throttling : Yes
Throttle Range : 1% - 2%
--------------------------
BIOS:
Manufacturer : Phoenix Technologies, LTD
Version : 6.00 PG
Date : 25 December 2004
Address : E000h on 512 KB
DMI Version : 2.2
---------------
Temps:
CPU temp: 39.5 C
Mainboard: 22 C
CPU Fan: 31395 RPM
----------------
RAM:
General Information :
A0 (RAS 0, RAS 1) : 512 (Double Bank) -
A1 : Empty
A2 : Empty
A3 : Empty

Memory Controller Information :
Memory Controller : System Memory
Location : Mainboard
Error Correction Capability : No
Number of connectors : 4
Max. Module Size : 4194304 KB

Chipset Information :
Type : DDR-SDRAM PC3300
Frequency : 206 MHz
FSB/DRAM Multiplier : 4/5x
Channels : Single
ECC Diagnostic : No
CAS Latency (tCL) : 2.5 clocks
RAS to CAS (tRCD) : 3 clocks
RAS Precharge (tRP) : 3 clocks
Cycle Time (tRAS) : 7 clocks

Information EEPROM (A0) :
Manufacturer : Unspecified
Part Number :
Serial Number :
Type : DDR-SDRAM PC3200 (200 MHz)
Size : 512 MB (2 rows, 4 banks)
Module Buffered : No
Module Registered : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 2.5v
Supported Frequencies : 200 MHz
CAS Latency (tCL) : 2.5 clocks @200 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz
Cycle Time (tRAS) : 8 clocks @200 MHz

 

[race_2005]

Looks pretty good starting off. Im impressed. So what exactally are you looking for in the way of comments. Anything in specific? Advice? Suggestions? Im at a loss

<subscribed>

well, advice on how to get the FSB up, are the voltages/temps I posted within a safe range with 8mm intake/outtake & cpu fans?

uh...what exactly is folding? My father & sister both died from cancer

btw..I built this system for $396 (including tax & internet keyboard) from a retail computer store. They even mounted cpu for me with Artic Silver 5