Decided to overclock my I7 860 2.8 ghz, got it to 3.5ghz, and seems stable, started my voltage at 1.25000, MB is a Gigabyte P55A-UD3, do you all think the voltage is fine or should I go higher, also temps are 55c just normal uses, got one core to 83c under a full load stress test, after like 8 mins, think this ok also? any feedback or ideas are welcome.
CPU
Intel Core i7 860 @ 2.80GHz 54 °C
Lynnfield 45nm Technology
RAM
14.0GB Dual-Channel DDR3 @ 503MHz (7-7-7-19)
Motherboard
Gigabyte Technology Co. Ltd. P55A-UD3 (Socket 1156) 41 °C
Graphics
LC27RG50 (1920x1080@240Hz)
LC27RG50 (1920x1080@240Hz)
Acer XFA240 (1920x1080@144Hz)
4095MB NVIDIA GeForce GTX 1070 (EVGA) 54 °C
Storage
238GB SAMSUNG MZ7LN256HCHP-00000 (SATA (SSD)) 35 °C
698GB Hitachi HDS721075KLA330 (SATA ) 42 °C
232GB Samsung SSD 850 EVO 250GB (SATA (SSD)) 30 °C
931GB Western Digital WDC WD10EZEX-75ZF5A0 (SATA ) 34 °C
Optical Drives
No optical disk drives detected
Audio
NVIDIA Virtual Audio Device (Wave Extensible) (WDM)
CPU
Intel Core i7 860 @ 2.80GHz 54 °C
Lynnfield 45nm Technology
RAM
14.0GB Dual-Channel DDR3 @ 503MHz (7-7-7-19)
Motherboard
Gigabyte Technology Co. Ltd. P55A-UD3 (Socket 1156) 41 °C
Graphics
LC27RG50 (1920x1080@240Hz)
LC27RG50 (1920x1080@240Hz)
Acer XFA240 (1920x1080@144Hz)
4095MB NVIDIA GeForce GTX 1070 (EVGA) 54 °C
Storage
238GB SAMSUNG MZ7LN256HCHP-00000 (SATA (SSD)) 35 °C
698GB Hitachi HDS721075KLA330 (SATA ) 42 °C
232GB Samsung SSD 850 EVO 250GB (SATA (SSD)) 30 °C
931GB Western Digital WDC WD10EZEX-75ZF5A0 (SATA ) 34 °C
Optical Drives
No optical disk drives detected
Audio
NVIDIA Virtual Audio Device (Wave Extensible) (WDM)
Last edited: