Notice: for those using warp11's 9500pro bios

[Malakai]

If you're using an overclocking haxed bios for your 9500 pro, make sure you have the right one for your card.

Warp11's bios is only for Retail ATi 9500 Pro's that have Hynix 3.6ns memory.

If you use his bios with a retail 9500pro that has 3.3 or 3.0ns Infineon, it still runs the memory at the 3.6ns' timings.

I could only oc my memory on my 3.0ns Infineon 9500 pro to 310 (and I would get artifacts in some games at this speed) before when I had warp11's haxed bios on there. Now, with the correct bios on the card, the memory is at 325 so far with no problems (I haven't tried pushing it higher yet).

Go here for the correct bios for your card. Im using the 9500_30.BIN bios and it works corrently. If you have the 3.3ns infineon card, use the 9500_33.BIN bios file.



If anyone needs any help identifying their cards or flashing the bios, just ask me in this thread.

 

[augustwest]

d00d! you rock! i was wondering why i couldnt get my 3.3 ns ram much above 300. nice find. thanks

 

[Evnas]

Im glad i have the Hynix ram...my 3.6ns Hynix has gone higher then many 3.3 or 3.0ns Infineon

 

[Malakai]

I still haven't had a problem at 325mhz on the memory yet, I played TFC and C&C Generals for a few hours today.

And no problem, I'm glad to help.