- Joined
- Mar 13, 2006
Ok I was given roughly half a system (e6600, Asus p5k-sli deluxe and a stacker case).
I bought a 9800gtx+, Xigmatek 1283 with bolt through kit and repurposed the Corsair 650t I already had.
First memory I bought was bad (Corsair XMS2 4 (2x2gb) PC6400 kit.
Replaced with some OCZ PC6400 which passed Prime95 without issue in safe mode.
Rebooted the machine, updated/installed all drivers and then left it for he night.
Last night, I got home and decided to make sure all updates were in place prior to anything else at which point i noticed that the mouse wasnt working..
hmmm I thought, and then noticed that neither was the KB nor was there any disk activity.
I spent the rest of the night trying to pin down an issue that leaves nothing in Event viewer, log files or minidumps. The machine just stops randomly but never gives a BSOD.
Any ideas of what to try? the PSU is a known good, the memory passed Prime95, Im thinking it is the newest Nvidia Drivers but I have zero info to base this off of.
The CPU according to BIOS is only at about 27c right after reboot from a lockup, the MB temp shows as 29c.
Casewise this is housed in a Rocketfish
Delta 120x38 intake at the front
Xigmatek 1283 with a 120mm delta blowing towards the top of the case through the HS
Stock Rocketfish (lian li 120 for exhaust on rear)
2x 60mmx38 fans at top rear blowing out grating for upper exhaust
120x38 Delta blowing out for blowhole on top of case
Cooling shouldnt be an issue as this is almost the same setup as the other rocketfish with a 939 setup in it.
any suggestions short of nuking from orbit, I hate trying to pin down a phantom issue and this is driving me nuts.
FYI: ALL STOCK/default SETTINGS, No OC.
I bought a 9800gtx+, Xigmatek 1283 with bolt through kit and repurposed the Corsair 650t I already had.
First memory I bought was bad (Corsair XMS2 4 (2x2gb) PC6400 kit.
Replaced with some OCZ PC6400 which passed Prime95 without issue in safe mode.
Rebooted the machine, updated/installed all drivers and then left it for he night.
Last night, I got home and decided to make sure all updates were in place prior to anything else at which point i noticed that the mouse wasnt working..
hmmm I thought, and then noticed that neither was the KB nor was there any disk activity.
I spent the rest of the night trying to pin down an issue that leaves nothing in Event viewer, log files or minidumps. The machine just stops randomly but never gives a BSOD.
Any ideas of what to try? the PSU is a known good, the memory passed Prime95, Im thinking it is the newest Nvidia Drivers but I have zero info to base this off of.
The CPU according to BIOS is only at about 27c right after reboot from a lockup, the MB temp shows as 29c.
Casewise this is housed in a Rocketfish
Delta 120x38 intake at the front
Xigmatek 1283 with a 120mm delta blowing towards the top of the case through the HS
Stock Rocketfish (lian li 120 for exhaust on rear)
2x 60mmx38 fans at top rear blowing out grating for upper exhaust
120x38 Delta blowing out for blowhole on top of case
Cooling shouldnt be an issue as this is almost the same setup as the other rocketfish with a 939 setup in it.
any suggestions short of nuking from orbit, I hate trying to pin down a phantom issue and this is driving me nuts.
FYI: ALL STOCK/default SETTINGS, No OC.