• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Ordered an AGOIA 0213 "Y" and what did they send me???

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
AGOIA 0213 Y

Hi i orderd mine on 10/21 and i got it yesterday .. i`am going to install it and see what it will do :)
Good luck on your Order
 
Installed :)

i have the AGOIA 0213 Y running @ 1700Mhz 10.5 X 162
it`s doing it no prob at all WOW i`ve even ran Unreal Tournament 2003 with no probs .

my Cpu Core Volts are at 1.89 thats what i was running my 1700+ at OCed to 1661 11 X 151 .
i didint change it, it may do these speeds at default i`ll half to check .

my temps are great 33C full load when i installed the chip i put a new ThermalTake copper Shim in thier with my JaggedEgde copper water block i think it lowerd my temps a little :) and i`am useing Arctic Silver 3 .
so far this chip OC real good better than my 1700+ i think i`ll need a newer Motherboard with the 1/5 divider to Exploit the chip to it`s fullest >>>

EPOX 8K7A
AMD AGOIA 1600+@ 1700Mhz
256 megs Crucial PC2100
ATI Radeon 8500 LE 275/275 3.3ns Hynix
Lite-On 40X Burner
Aopen 52X CD
IBM 60 GXP 40
Jaged Egde Water Block
ThermalTake copper shim
Tygon
Via Aqua 1300
D-Tek Rad
Sunon 120X38
Antec SX 1030
Antec 400Watt
2 EnerMax 120mm fans
2 80mm fans
Toshiba Pcx 2200 Cable Modem
3Com 905cx Nic
Altec Lansing ACS 45`s
Hitachi 17 inch :(
 
Steel, i have the thermaltake shim also, but unfortunely it arrived a little bent so i had to bend it back the best i could. It lays pretty flat but if you look close enough you can tell its not perfectly flat. Did your shim arrive a little bent? Do you think it will effect anything?
 
Last edited:
HI

Hi my shim came in perfect condition .if yours lays flat it should be fine just make sure you put it on the right way or you will fry your chip out .
 
Hello Everyone..

Sorry for the delay in posting .. been a busy day..

However, I have got a bad news and as well as good news (I think..)..

First of all .. the bad news is I didn't not get any Y steppings today.. and the good news is that I did get 100 pcs of 1600+ and they are all AGOIA 0226 Z stepping..

Yes.. it is 26th week version of 1600+ and as far as what I have been reading.. I have not yet seen anyone talks about Z stepping..

I did some minor test so far.. Loading Win XP pro.. run sissoft sandra.. and 3D2001 .. at 166Mhz w/o any changes to MB.. and it has been running for 3 hours already..

I will see it for the night.. and let see what it does on tomorrow.. now.. if everything is okay.. ( I mean, it passes all the testing I am doing) .. I will use this batch as replacement.. for the K steppings that you guys got..

Please let me know any news or info regarding this .. I won't be in the office tomorrow or over the weekend.. so.. Please e-mail me to [email protected]

Lawrence Lu
GameVE.com
 
Anyone that got one of the 0204 K chips by mistake try an oc yet? I'll be building the new system Saturday/Sunday and will post my results for this config:

XP1600+ agoia 0204 K
epox 8k5a2
512mb Samsung DDR2700
Thermalright SK7

deadseasquirrel
 
Okay.. although some ppl talk about the Z stepping and 26th week of the 1600+.. however, here is my result.. I have try two processor already.. and I am pretty satisfy.. my test was as follow:

Run 3D 2001 Bench Mark test once
Run 3D 2001 Demo Continue for 10 time or more..
SisSoft Sandra 2002 CPU test for 20 to 30 Min.

First one:

AZZA KT400 (generic in my opionion) Mobo..
256MB DDR2700
Ti 4600

1) 166*10.5 = 1743Mhz (2100+) at 1.75v
*** ALL NIGHT LONG w/ 35c Air Fan ***

2) 170*10.5 = 1785Mhz (2200+) at 1.75v
*** 2 hours w/ 36c Air Fan ***

3) 175*10.5 = 1837Mhz (*****) at 1.85v
*** 2 hours w/ 39c Air Fan ***

Second One:

MSI KT4L Mobo
256MB DDR2700
Ti 4200

1) 166*10.5 = 1743Mhz (2100+) at 1.75v
*** ALL NIGHT LONG w/ 40c Air Fan ***

2) 170*10.5 = 1785Mhz (2200+) at 1.75v
*** 2 hours w/ 42c Air Fan ***

3) 175*10.5 = 1837Mhz (*****) at 1.85v
*** 2 hours w/ 46c Air Fan ***

In Conclusion:

I think this is good enough for me.. I don't think I will go anymore further w/ this CPU as I don't think getting the max is all that important.. (that's just me.. by no mean I will stop you guys for trying)..

Anyhow, I will use this CPU to exchange for those who got the K stepping from me .. also if you want the refund instead of exchange, I will not charge any restocking fee, however, only thing I am asking is to send the CPU back to us at your own expenses ( I don't like to use call tag for I don't like to pay fedex more than what it supposed to be, I would rather give the saving to customer), however I will give $5 credit for your future purchases.

Let me know if anyone have any better idea.

Lawrence Lu
GameVE.com
 
There was mistake on the Temp on both setting..

it only increase by 1c on both mobo.. however, it did went up 3c when I increase the voltage..

Lawrence
 
Lawerence do you think you guys will ever get in any AROIA's? i would love to see a dealer w/ guarenteed AROIA Y 0220's or any AROIA Y for that matter. AROIA Y's are supposed to be nearly guarenteed 2ghz if you have cooling that can take 2.0v.

my friend has a 0220 Y and it does 1900mhz w/ 1.75v!!!! but then it will only do 1950mhz w/ 1.85v and while he doesnt wanna give it 2v i bet it will do 2ghz w/ that much.
 
Back