• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

overclocking GIGABYTE P35-DS4 + Intel E6750 @2.66GHz

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.


New Member
Jan 6, 2016
Hello. I've been running this for half a year with no problems but sometimes it resets to normal after restarts. Can i fix that? Also i wanted to check if it needs any more tweaks to improve and stabilize. Need some help with memory timings if someone knows whats up.


MB_____________________GIGABYTE P35-DS4 Rev. A2 (LPCIO - ITE IT8718)
CPU____________________Intel Core 2 Duo E6750 @ 2.66 ghz
SMBIOS__________________ 2.4
BIOS____________________ Award Software international Inc. F14 (Date 06/19/2009)
RAM____ ________________DDR2 - 2x 1GB Kingston HyperX (333mhz) + 1x 2GB kingston ( 333-400 mhz)
Graphics_________________ NVIDIA GeForce GT 730 ddr3 2gb


Robust Graphics Booster_________________ [Fast] ?

CPU Clock Ratio ________________________[8x]

CPU Frequency _______________________3.20 GHz ( 400x8)

CPU Host Clock Control________________[Enabled]

CPU Host Frequency(Mhz)______________[400]

PCI Express Frequency(Mhz)____________[100]

C.I.A. 2_____________________________[Disabled]

Performance Enhance________________[Standard] ?

System Memory Multiplier____________SPD_[2.00]

Memory Frequancy(Mhz)_____________667___800

DRAM Timing Selectable_____________SPD__[Auto] ?

*****Standard Timing Control********

CAS Latency Time___________________5___ ?

DRAM RAS# to CAS# Delay___________5__ ?

DRAM RAS# Precharge_______________5__ ?

Precharge delay(tRAS)_______________15_ ?

*********Advanced Timing Control*********

ACT to ACT Delay(tRRD)______________3__Auto

Rank Write To READ Delay____________3__Auto

Write To Precharge Delay_____________5__Auto

Refresh to ACT Delay________________44__Auto

Read to Precharge Delay______________3__Auto

Static tRead Value___________________8__Auto

Static tRead Phase Adjust_____________0__Auto

*************SYSTEM VOLTAGE NOT OPTIMIZED********* (blinking)

System Voltage Control_______________[Manual]

DDR2 OverVoltage Control_____________[Normal] ?

PCI-E OverVoltage Control_____________[Normal]

FSB OverVoltage Control_______________[Normal] ? (

G)MCH Overvoltage Control____________[Normal] ?

Loadline Calibration___________________[Auto] ?

CPU Voltage Control___________________[1.35000V] ?

Normal CPU Vcore____________________1.35000V
Last edited: