- Joined
- Feb 17, 2001
hi I have p3v4x w/700e gforce256 ddr pc133(ca2up to 138fsb,3,2,2,5 up to 150)but the problem is with this board agp divider is stuck at 1/2 =75 unless you switch to jumper mode and then you can set 2/3 agp divider but as soon as you boot up voltage drops back to 1.65 so no 150fsb.Anyone no how i can get 1050mhz,150fsb,w/2/3divider=100agp bus. thanks.
