P4 2.0 @ 133fsb default vcore

[bm1]

So how hard is it gonna be for me to run a P4 2.0A pack date september 2002 @ 133fsb on default volts? I'm planning to get one from a local supplier next weekend for 100 UK Sterling.

 

[pacino]

the guy I sold him my 2.2A pack date January/7/2002 does 137fsb (3ghz) with 1.7v, so I'm guessing newer packs will do 133 with ease & less volts too ..

 

[AbraM]

Mine was packed sometime this summer. So it is a little bit older but not that old... I needed a little bump in voltage from 1,50 to 1,54 to get it rock stable at 133 bus. My motherboard do not give smaller raises in voltage than this (+5%, +10%, +15%). It is stable up to 135 bus with this voltage, after that a raise is needed. That is not much as the fastest P4:s uses 1,525 volt stock. That shows the way

 

[jdmcnudgent]

if you get your hands on a new c1 stepping 2.a, it would be very likely. but, if you get an older one, you might have to feed it some volts.