Peltier PSU Question

[m0r_pheu$]

I need to know of a good PSU to power my 172 Watt Peltier, my pump, and some fans

 

[Hoot]

I assume all three run off of 12V-13V?
Hoot

 

[Hoot]

I had to drop the post and go look for this info. This is an excellent value!

TDE | Antennas / Power Converters / Power Supplies

Hoot

 

[m0r_pheu$]

Hoot (Mar 20, 2001 06:13 p.m.):
I assume all three run off of 12V-13V?
Hoot

I don't know what the peltier runs off of, but every thing else does.
The peltier is located at dangerden.com

 

[William]

your pump will run on an ac line i believe. On the peltier and fans, give them their own PSU.

 

[m0r_pheu$]

I figured id have to, my real problem is I don't know what kind of PSU to use for my Peltier, or how to set it up.

 

[m0r_pheu$]

dunno260 (Mar 20, 2001 07:15 p.m.):
your pump will run on an ac line i believe. On the peltier and fans, give them their own PSU.

My goal is to do what DrRom did,
172 W Peltier PSU UNKNOWN ???
Water mostly DangerDen stuff,
Enheim 1250 Pump Cooling Cube w. 12mm Fan 2 80mm Fans for my raid setup
fan in front, fan in back
And THIS CASE!!!
Case Depot

 

[dasouthernocer]

That 172Watt is prolly comin from TE Dist. And theirs is 24V @ 11amps. 18V-24V power supply would be the best. You could run it at 12V but only gonna get about 1/2 performance ~86Watt. Check ebay for "24V powersupply". And the fan's if you got a 300Watt PSU just run'em on it don't worry about external . Hope that helps.

-dasouthernocer

 

[Colin]

See this thread "Found a 24 volt power supply source."

 

[m0r_pheu$]

What thread???

 

[Colin]

The thread is in this forum!!!

 

[RadioActiveDog]

DrROM

Does anyone have any information on DrRom?
Please contact me if you know anything about where to find this person. Andrew James Barsing
AKA
DrROM
Stez
LIKWED
JBARS
To learn more why see
http://forums.overclockers.com.au/s...&threadid=64817