please PLEASE!!!!!! HELP ME

[ms-6309]

Ok this is the question
my hardware monitor setup in the bios looks like
this when its on default

clkgen spread spectrum :enabled
cpu host clock(mhz) :auto
cpu ratio selection :3.0X
cpu vcore selection auto

its a via chip set ms-6309 cel 533 ppga
128 pc100 / matrox melenium G400 dh

so what should i shange to make it run at 600

 

[Tim-]

Set the cpu host clock(MHz) to 75 instead of auto
Set clkgen spread spectrum to disabled.

Let us know how it goes!