• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

PROJECT LOG Project Zero

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
Shouldn't be any vibration with the rubber in there eh? :thup:

Can't wait to see the sleeving pics!!
 
Shouldn't be any vibration with the rubber in there eh? :thup:

Can't wait to see the sleeving pics!!

yeah i hope ;D



Hello guys,

i ordered me some more plexi for the back.

y3mjYNQMxxKN8pwutCyXpOHX5yuQF4sfYMiHRTOla_IjHew708MeGdIZoossrwRckbKesPlXd5Mst_mlirZWrJEWRsV8HWA-WeXIY5HDST02a52EcZ8hOlI79tJ9VU6uWx_xEWKB4HeNyk_z_c3_s4KoJA7mwOxIJtvaH0G5F5PHGQ


and made a hole for the cables.

y3mVFxJDon4Y6r_xATG8ZdDV36dXmBhn7l_ZJW-bL46h6XKWdXUzFCeuY1fXf_iE5B2Aq4OSaDlYpt5ty6vKmOVCeTxCz-Lg1mT3GMMiBqW7JPluX_1qcsjCk7X-K61r-6SrnbGPImVwyf9QkOyCsGliemC4UqH1jrH96bnFE4HW_I


y3mreDDMY48OC7shKowBARniVuZs6RRoC4U7OVc_jVkk_BUGU5seIWQ0LXXLFsiQdT5_Jqzr9SFi3vMLPxpwXgJ67eSw1MykYP-0alA8BEDXvP4QlC0nTe2njWcGoYWPt6IeAef_JRVFuhF9zMCtpji40N7wZ46bnuCZo7Hcp0_wZY


And holes where the warm air can leak through

y3mETtYeh9rN0KYUXsEjN7sl3ngjMEdPWYvx2VRj4RgzL_fXWTcQVAWs0i7vCLG-eu2HQx7MWCK8vmL9DxNueWG7a8SG3fn0HQbjgxf0Nsh2OyQfCFnFSavDazpUp82TQWskALrXCg_b5oXNpABxTXVSFEjEEyUlvrm-oJGV9nHTsY


Let the fun begin... ;D

y3mbYVyb38yFmaZgkpuvBGvCSwIPsEeTPRvsItpsp4Hedn34_JnN7lw5fIUC-bJMpog-lUG-Muiq4fIy5_l54zXYxdleiXBsuLNX6BP4GUZ5N1xufrmk00xsPSbRYyRn0B7f0OHCRULalJbUkk16hIYEC_Eqt37v_66-kFekWqTlf0


This wasnt fun at all

y3mBWcyILENO0rvWDRMBxNkay7k-jWQjKu-YPhOOZFfZYv5POH3uxZRQWl-nyKJdFx0dzyrFfvtG_Cta_FNoHcwa6o1CLiG-RuLuIRs96f2b1IJ7UWhOItFhoG3O8J-p5r7G5WZjUp0OHH1OGEQdzOajGRq9x7c7XgPRLqCb4HBOWw


so i decided to go on with something different.

y3meJYM92nf0-zVY8saDiWo84oKneTQZKHmuBSxKA6IcZs-MdrGB5D5rKuVC2omY0iZSJ_1KG2Uz1S5G5qEj20xpJmYvy7LlYgZCjN2x_fVviXs4lbyQUhcbWXyNbL-koGoo3H4SlPZk6FxrUpFHvumydkarqclK7i-RoHv3zcXOJc


y3mGOXKFniyEQSZFlzzcqmODvH9e-EwY0fcRjz-dz8woN0glG5qt1pOjruknPrs-LlxYBjF71PioSsydx8tlih-pxh4pWlA-Z1xZZOdXB9tSkqTnT2-bzkjQ_IN2cyD2SRwYJivI_UL3PEliGarpuxj7RB_9a04L4A-A6DlttrPNh0


y3mTZG3thjrrnHjsPlcqLNpwt91KeGwcIrcCrZ_SDmdaRbRp4e1v5BdFki0baXe_FCGIwvXFb05oJpq8Dox5Z5qclFchOnTwv3KAKVtPIj4eLWE0NqH99c85pxVAjcU0yIZppYtaOdMyr3ejke5SP9d37rHJwjiciRThLNm7qCgWL4


y3mXF9VKP4JVs9b29lcThWslauNnni2Ih2ufi0m-eq__SdEoL7n-9QJPc9tPyrSZCAyLQiotnl4sDM59QEnA4PEerFjE-HaPkob-mVIxVRjTMv6i0aqtQWcTm-L5E7WoWqpFfLltuDgBw0t51osEnfqAVvIKRKqZiMTASvjDdlqDDE


y3mDSz9NbZk2OdGnvhNyzaGcbzsBwoo7MBmjqBPFAYfcKWwCLJDsDGTt5tqIPZbYW0axTuEkUT2_zTMaNimyza2ZE9-U8dUdX7tFjm1vvESxXa0KuFFoDUQ4lL8AryRaB20gTtGZ5_eT3D-ECbeFP83d1uxEbRI_L9mRmwMq5DrURM


y3mGRf5RCmXVHJBd-qrmgk8qsakTdJP8RYG3owN3Kz2RGdQIpLijfRirwFbRezYWnEG9or7t9ExAIJzIPTp1u_zukXPJPDYc4-YjV2aB-aIT2FU73WJERhpM_1ZhlugOtFJ3I9Pq1cCTYepDxbL8l7ThLTCWBkmabSgMSIUYT0ZhN0


y3mzoKJenH7HCBrXj04damT_Cn9btz8yo0SBn68abobgBddizbhO5LRugfSkJMavwUTDFQEGeBzwQVlIL-we0YZ4eKs04xlOq30HdxJeJqbSxe6xDQoT3xtEnCuL91f-Ksdbj5BX7L1_NVaWD51s3hcoJtkOsz4LQQ-W5AahrU98N8


it is a little embarassing for me that i made a mistake again.
It cracked because i was to carefully at drilling the big holes and used the drilling machine to slowly so it canted and the plexi got a little crack.

but i want to show you all.

y3mUGvGBtpotCQbtyGpcf0WZv6huDEbfgVIuBHPhBV6NPu5OKM8GVFr-F9-oL1J7jYWfZP2lBgcUShN94rq6yv7r-e0RMMwd994hAnyQdIDF-c6l40hRppLnn9_ZvAY0rOzvqmaG7QUOf5z9zl5BUoFYrpTtNLUZH5GNr_6ctwcmcI


y3mtGGbW7DSvA_Tn29FKYBZ7G-NFNjq3JB2kH9dDGLKtD2SnbOwzuvNoKDCdR03a-StQ_gt4QlxjxUrmCjhCFXxqEOHl-kGK6-4GAcWiwMoOhE6M0m214RpxpYwpkVRSoDLKGEzyTJ9prh1eK6OCWuFrHLG9nQNdYhhIvfUv75EMxQ


hope you like it nonetheless

Benny
 
Sucks that it cracked Benny but that takes a lot of time and skill to cut all those holes so props to that :cheers:
The fan shrouds you drilled look great!

It's really coming along Benny!
 
That really sucks about the cracks, I've had similar problems as well with some work that I'm doing. Thankfully, my work provided some of the 1/8" copolyester that they manufacture. I just cut with it this morning and couldn't believe how crack resistant it was. I was testing its limits and could hold the cut piece in the air with my hand and drill a hole close to the edge without any cracking *gasp* I hope my work signs off on me announcing the product because I think it'd be a new modders dream.... even though it's extruded :p

But as of your vent designs, I really like how the left one has the 'X' in it with the bigger spacing and holes. The middle design is awesome bordered with the two circles. Great job on the drilling, it seems you learned a lot from the first to last drilling.
 
Sucks that it cracked Benny but that takes a lot of time and skill to cut all those holes so props to that :cheers:
The fan shrouds you drilled look great!

It's really coming along Benny!

Thank you =) yeah this took quite some time. for the mini holes i needed half an hour alone, then i decided to go another way ;D


That really sucks about the cracks, I've had similar problems as well with some work that I'm doing. Thankfully, my work provided some of the 1/8" copolyester that they manufacture. I just cut with it this morning and couldn't believe how crack resistant it was. I was testing its limits and could hold the cut piece in the air with my hand and drill a hole close to the edge without any cracking *gasp* I hope my work signs off on me announcing the product because I think it'd be a new modders dream.... even though it's extruded :p

But as of your vent designs, I really like how the left one has the 'X' in it with the bigger spacing and holes. The middle design is awesome bordered with the two circles. Great job on the drilling, it seems you learned a lot from the first to last drilling.

Thank you.
Copolyester is used for drinking bottles?
i havent seen any in your log, only aluminum ;D

and yeah i had enough time to learn ;D
 
Thank you =) yeah this took quite some time. for the mini holes i needed half an hour alone, then i decided to go another way ;D

Thank you.
Copolyester is used for drinking bottles?
i havent seen any in your log, only aluminum ;D

and yeah i had enough time to learn ;D

Yes, the same copolyester that's in some of the drinking bottles :D I think it was the second to last post in Blue Fury. The light blue color is just the cling wrap to protect the finish.

IMG_1415.JPG
 
So finally i can go on with my build.
Gosumodz got the tools back in stock and i could order them.

y3mfQhAfIGURDkJE4113wLn6AAzlZaC-jjMS0XZQgstO1WBJYYLnKAhkZaM7GbRXoM6cBE84_iLX-cm0s3MmfiayjNYH0OYG7KmP1uzBFVUPyPDYYs7cUkyLFrH_uPuagFvAV6-ZOgaOPaHEa2VaavDFABFRiZXHhJNl7fpCeRXfg4


my first time sleeving btw, but i'll give my best =)
 
Progress =)

i mounted the pumps and decided not to sleeve these cables, cause you cant see them at all.
And i made light test.
Also i installed the top fans.

y3mck_b3DBnkjV6U8jSHar9S9abtaX3b_QrOJH6lb1k6eZri1zl_wIwyc4SvT6SGrHJCnvgtGCayt2fJoZGiU-dFaEYokRKDIGzLXIuFuvIWKtetSC8bujgkZzzizpe8qvxAbYieFtqkdzxstVB8uo4iEb3Gj7zLCzUiDtzcyHGl3w


y3mLN8gXXjilkOJ9eNnD69kf2kWPo2U6yElsoNuUO2si-aMQ0F0JegFNFFGFS0dqoPbgPACQurBiO-44Ay67bkmdoKsTF8mzG_82YMIZFugkx91fb7nN1Wvkx14c_PGN4YxstgFv6y78oTQRfF-nsrSjPhkGbQwkA3nW3XmbA4axMo


y3mnSMkUZG5ZPdxOmW5ZWw2gKSpfpVYXLqQtJMMFrSmzTMB-6OTlTCu373wMFRmqyVUdQayoNi3S3MeT_jh6qgrOaO2BUog4kQ4R7KddNILo9lzilHoU2JbpeamIVyIyjmwaIKoZKPFYTwf6MQtfBVRj4HeBN3h4HUir_b56_5XVhI


y3mSIxH3k4D1b6Q2U-6LCrdI-6rRxgh_3DNrL_Sjd4O44CKSb8Ldf1_dj4mFe3C4rYvwXOB21JxnpF6WWbtHUYgPU7m4FGzYHH7V7Nm2f02DFMJI235bjXPYsor5JWOTJ9_q-cDmTjcVUPEWQs4kp6E3o3mhmAVfNA1Vcgc49jd9Ww


Then i began with the sleeving.
for now it makes fun =)

y3mVNnc1ysl-Le4xt0ola2y_wmK9dNtusevUlzkWgvAMXpPX_M6DRvKKnfx9huRWzQ03YwIeMyZR5qF9zqfYMnfMaKRGpvF-WXx-NIuc-eaWzxmOfPLTircQ3ZY4QJrNRwvaXi0nyRONrBHoYUCMrMgvE8H0WafnKdleLEPbSOTRQQ


y3mv_aJy5QiJ37Re9AsQcSeIv_5_M8jUEA-yV0LzDQK0DhTBiaYYyeX4JjrXB1tXmG3y6zeLLYD7OztLmaYX1NRHNUNSC9mzMgmj8IwGKqdpfCgxCv9t76UYfX50LpMR8NGL7Om8cHRTa7H0FI36kg_QteEB9Vs3aZ6MTpReLJI0rw


y3mR15qpb-Rqyo9M16GV_8xcoq75RYeF2qioX5SpGeKqmKmGE1ILEjqGXvBo5kTEGOm92NebpAXdQBR6S4vYt6vvZPtjuNtmus3uhwwyL_AgSU7dp1uWk9wP33_fcZKIOsnbVE6OXEj8bSrazxhA9-lU28NrbYBDMU7sVJbe9y4Hug


y3mXBl1kgjSjRjLSxp5tq9xvoAU0AGhkCYeV9ntlbD69hroBEpRjmF6mFivdH4RiHWV7s_Dy4lYEiuDLUIi1RhTwcaIWPfeWNn13hLrwwOfJhpPnVDnyK_sHxjte-N3pDut7dILf4sBbEhSutsr7zEKGmWEEZgW_vl25zwK5VT5h8M


y3mMu1rk9NUWnNBsiYrMyJmMjRcWX7EqAh4Fwi3UwUXyiTOfriccakF0wm8YobKM7f_Sk8gATB4lzE52jFSkNXROP2fQg1P9ZRw41-5CNjM4f4vx-CjSu9IApOw7R_hG2SwMwdrgKZADcQF2uqrHI_WPqymyQ7eExY50x9avGX2RsA


y3mrbBWOElMeFPrv_NWrpMEZa3FJsBMKuQFx69TvRjhKH6wbTJfSWJmE2QL7Q7N6LxSBhLnp0qAm7YZM78CUHs6G1KGWI2W9XSBAQzdr5KGS1MN28DFJRIoG0dg8xtdxcXRtKJwP7aJ-bmi_ms5rBj03OK_THVFHb8Uj4Nj_d9dTAA


y3mmb_Tprtt4mACD4rde4U2jjMxI58UG-hWUAIi_4-Fp_auA1eMvHG4d8-sWXstxSh2DBlv2T90I0ZeyEROFPrHg-d8NSohIqFE9cA8kOpeqVquoVEFNpdu4M7qodAQ8O94cHSxH0EhrbnksKqyUQDoB9sUZ80pBRo3zI-hSdaIRGI


y3mTQg5fpmqtP94pVhV14ejmMfmMv8VZ2s96LpWltm0T65ljwRIscNgytuhodj0GamzWSBPU0Tqs_2F-DjB6du3eweKG9y_HNWDzBfHcxvud-T2SneueqbaMJ5nnT_fjg-5PNwB4-wu0Bv_VDcSFXGqKgaZnwU-LPDNZXdxC5WF-Ow


And my two SSDs arrived which i bought on cyber monday =)

y3m7YqQ2vQL2POinRLNjX6j0FlvJ2fL9yuSX58KuyRWDhqG-jv5I_KayjhlytfNX4M9GqT2NJ0uZoQ05LXoSiepaWdMuj7blBbJxLIUS1w3_nc182vSFstuJfDcPnr0qS7Z6jS8QYgPZ39dsvsDtoH9-sQD5FioAs05r-iWUoqYsW0


stay tuned =)
 
Yeah wow! Those cables look great!!
I've always wanted to do that too... I might have to know those are sweet looking! :thup:
 
Finished the sleeving.

y3mRR27hmccAL60TllkkmrVKyPG_E-wM6LYC0bGhcwUCY6C5nCdFJC6pU6IAUAVDr_1dgbpim-O1yKU30K4YwShRqHBD22TSf4xJgA7bAxMmizXxaMUwP69FRAJS2OQr-5mozuRiHspEZmrvdXkg73S6sOqScfrVtsn7-vxouosUmI


y3mc0nO3fsDB4dZ1BPdWOe8rIZEqA6Ctfzu0z6h1MUwhjCqw4F4bPLS-BL3f4ZzJzDqTfREdF8aFrSyxGJAPGSrf-WE9wxmbLirV0eCLJQUeAxDeeH-hBWaTRpmn7LVyZ59SQU07qkx7DJ4MxkXb7mzkh2Ay5RPpayV1qdQ1ZT3LYw


y3m1LAGlYX7hfpsUX9eCD8n8A9rkGbvs0OsidD9pHMGaZ7a_2ybcFHRbMz5M-rbaiXWLfy5qXlI1X0PIeVu1s6jZaiv8E4bSmx_RhR7a_5C0spKrqmnlZomkAYL4xnm_tdQOTDCWVjXUHexsqIhTJHyYdzPG9891pfWrxg4pHkM8Ms


y3mRXt4NzHTA8b6EUmeiKq1UOZcNevsrLY8cua80b-JxAt8Ggh2U1pQYGvTxggqWT26LmA8VsYepk4X-WXMQk6vm5HpMPH3T2sD3u0V2O-zsi0YfbD7-H19Df5cXLmWf4J6HL9na8e8jtAtR1vl73mwXjZZxV3R3DRoidUJopvf36A


y3m4k__x1FYmp6HlPZT26Ed3Y5Pnx1t0DPNSKhLV6L8fml3RGzYdhg43KhvQKVprvOXktTKROKhKt7rN4SklMWwS_v0WZvpAOOJtEmRk3WQuEGz4kqBfiMSohBGaZUUGrpXEyAGaVqvmJop3fC1Mpyjmfu247JZk1n_zG3X901dsf8


y3m4QIWUz4mwPbtyiBVBfav3P8pPi5CzRAth00jyOrK-ARmk4ASIS9Box1L0xlAiUO5KiGmjJLfbuBF0V40DlXMxCfLs7bfB6_joi1QI3_5EzZFfrq1vesmoAkM-aZ6j8t9Q8rfGw0PMON5p-b4E1f94-dgRzAnEiKnealulMyW374


y3mzwJBm3yd2zzkq-I2L2fDd8Yf7Vsgrv7na03pmcVzdk2r1zWZyzn1coKndyAE_iRYzCghT-QNnE_cqkJb77IXyWBqOTpMOSWjFds-llJRndrWd8nPjTb1zm_qd8Ie0eEELbvgGoFkLaNu56NErEYdwn6Be90ZC93kAZvyD_XV428



i have to wait for some cable combs =(
in the shop i wanted to buy them they are sold out for weeks now.
So i went to another and ordered them last Wednesday. But they havent arrived yet.

Next things to to before mounting the waterblocks and make the tubing:

work on my new enermax fans
flush the radiators
and think over the routing.


The colors are crossed.
Left side Res is Red and the pump is white
Right side Res is white and the pump is red.
 
Those look sleek benny! :thup:

I personally love the way brushed metal looks vs any other finish.
 
Back