• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Question for HOOT

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.


May 27, 2001
San Diego, CA
Ok hoot.. in my previous post for case cooling, you said either a fan in the back blowing in and one in the front blowing out or both front and back fans out with a blowhole in the side of my case blowing in on the cpu.

Heres is my 2 setups. 2 delta 38cfm fans blowing in the back in on the cpu with a 8mm fan out in the front or 2 delta fans blowing out and a 8mm fan blowing out with a 120mm fan on the side of my case blowing in. What do ya think?
How about what's behind door number three?
Get a Panaflo 120x38mm 86cfm fan. They blow good and are not obnoxious. That's for the blow hole. Lose the Delta screamers. Too loud for case fans. Get two Sunon 80mm 36cfm fans a nd put one on the front and one on the back blowing out. The PSU fan will take up the difference. If you already have two 80mm holes in the rear, then get 3 Sunon 80mm 36cfm fans and put the two rear ones on exhause and the front one on intake. Again, the PSU fan will take up the slack and in either case, you should still manage a slight positive pressure. That's my best call.