• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

RJARRRPCGP's Gigabyte GA-A88X-D3HP setup

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

Johan45

Benching Team Leader Super Moderator
Joined
Dec 19, 2012
Let the build begin? I remember now, upgrading the board.
 
OP
R

RJARRRPCGP

Member
Joined
May 30, 2004
Here's the stock clock Prime95 test:

Small_FFT_Prime95_Passed_On_Kaveri_At_Stock.jpg

I still have a sensor with an insanely high reading. This is even with heatsinked MOSFETs! This time, also one that looks wide-open! (The "-7C" sensor)
 

Johan45

Benching Team Leader Super Moderator
Joined
Dec 19, 2012
Use AMD OD to monitor your temps. The FM2 always had issues with other monitoring software.
 
OP
R

RJARRRPCGP

Member
Joined
May 30, 2004
Don't have the Patriot Pyro 240 GB SSD anymore. (shown on my bed in the background)

It was a POS, first off, the connectors felt cheap when I plugged it in! Second, I got an unexpected lag and found SMART alleging that they're were too many writes to cells! I didn't even have it for 1 stinkin' year!
Also a random Windows file error! :confused:
 
OP
R

RJARRRPCGP

Member
Joined
May 30, 2004
I just benchmarked both SSDs with AS SSD:

The PNY XLR8 CS2211 240 GB:

PNY_CS2211_XLR8_SSD_AS_SSD_Compression_Test.png

The Samsung 850 Evo 250 GB:

Samsung_850_Evo_SSD_AS_SSD_Compression_Test.png

Anvil's Storage Utilities 1.10 write benchies:

PNY_CS2211_XLR8_SSD_Anvil_Write_Test.png

Samsung_850_Evo_SSD_Anvil_Write_Test.png

In addition, it looks like in other Anvil tests that the Sammy kicked butt!

(Despite Diskspd & Crystal Disk Mark seeming to not like the Sammy!) (The 4K Q32T1 results were poor!)
 
Last edited: