slotket with c3

[slowmike]

i need a slotket that adjusts the vcore so i can run a via c3, around 1.35 volts, it needs to run on a chaintech 6ltm mb, will it work with this mb witha bios upgrade?

 

[Bender]

An abit slocket 3 should do you just fine. It supports Cyrix CPUs and I believe it has voltage adjustments that low.

 

[slowmike]

where can i buy it, and how much?
how does a 933 MHz cpu with a 133 MHz bus run on a 66MHz bus?,is the speed cut in half or does the cpu run at full speed?

 

[David]

where can i buy it, and how much?
how does a 933 MHz cpu with a 133 MHz bus run on a 66MHz bus?,is the speed cut in half or does the cpu run at full speed?

The mobo will need to support a 133MHz bus - if not then you will be stuck at 7x66=466? or 7x100=700MHz.

 

[slowmike]

thanks , i falshed my bios a while ago, i think it has a 100 MHz bus choice maybe 133. then i unflashed . i would be better off to get a 700 then a 933 to save some $.
where can i get the abit slotket other than ebay that has some for $10-12, it that a good price?

 

[JaY_III]

good luck finding an ABIT slotket...
i have been looking for good slotkets myself the past few days...
and with little luck. Most companies have discontinued them, so the channels are getting VERY dry.