• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

SnapGear SG300 Setup VPN to work with TheGeenBow Client on a dialup laptop

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.


New Member
Apr 10, 2007
I have got a Netgear ADSL router DG834 V3 in a bridge mode (modem only), WAN port of SnapGear SG300 which is connected to a LAN port of DG834 V3 and has publich ip address x23.34x.6x.95
I have got a Laptop with a VPN clinet installed on it (TheGreen Bow = TGB) , laptop on dialup connection.

I tried to follow the instructions in the link below (because I have got same scenario except different router, document router FVS318v3 mine is SG300), out VPN scenario is not site-to-site VPN. Our client laptop has dynamic public ip address (means different IP when it moves from location to another)


The snpashots for snapgear SG300 as below

1- Tunnel Settings
For the "Remote Address" textbox there are only three options (Static IP address , Dynamic IP address and DNS hostname address) we have to choose one of these three only, I chose : "Dynamic IP address" .

2- Local Endpoint Settings

3- Remote Endpoint Settings

4- Phase1 Settings

5- Phase2 Settings

6- Finish

On the laptop (dialup connection) I tried to match every thing on "TheGreenBow = TGB" client to be same as the router (SA , key, ID,,,etc) but still VPN does not get established,therefore I could not find useful informations from the logs

Please see the snapshot for TheGreenBow VPN client on the laptop


Last edited: