• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

So you have an A7N8X Rev2 and a 2500+?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
FSB - 191.9 = 382
multipler - 11
Vcore voltage - 1.65
Diod temp - 38-44
DDR voltage - 2.5
memory 4 settings - 2.5-3-3
Brand, size slots - Kingston value, 256 , 2 and 3
no modes yet.
PSU CodeGen 400w
Anything else? My upgrade is on the way, Mushkin LvL II 1GHz, SLK900a, Tornado 92mm then we will see what my unlocked 2500+ will really do. P.S. really good thread.
 
Update - I swapped out the OCZ Platinum Limited Editions for a set of Mushkin PC3500 Black Level 2's and am now running 11 X 217 @ 11-2-2-2 dual channel with no other changes to my setup. I passed Memtest86 with flying colors and about half an hour of Prime95's torture test before getting bored and turning it off, which is stable enough for me.
 
FSB: 218
Multiplier: 11
Vcore voltage: 1.675
Diode temp: 41-44 load (SLK-947U w\ 84cfm 80mm fan, AS5)
DDR voltage: 2.6v
Memory 4 settings: 2-3-3-6
Memory brand, size, which slots: OCZ 1024mb PC4000 CL2.5 slots 2 & 3
Any Mods: Nope
PSU: Antec True480
Anything important to OC that I forgot:
hate my superlocked barton, AMD may have lost a few customers with that press-release. besides that, i'm about to install the vantec iceberg NB cooler, and i'll try to up the voltage on the NB. i'm hoping for at least 225fsb. quick note: make sure to lock your AGP bus speed (66mhz).
 
bikemax,
You got a 218 FSB with the stock NB heatsink, and no VDD mod? If so, that's pretty amazing. Also, isn't AGP automatically locked on the A7N8X as long as you keep the default setting in the BIOS (I can't remember if it's: AUTO or 66)? My board is the A7N8X-X, so it should be the same as yours (just without some of the features).
 
FSB: 150
Multiplier: 13
Vcore voltage: 1.725
Diode temp: 39 C
DDR voltage: 2.6
Memory 4 settings: Auto
Memory brand, size, which slots: 2X256 Spectek DDR333(Mushkin BH-6 512MB X 1 coming soon)
Any Mods: Big *** fan on my northbridge
PSU: generic 300 Watts Astec (saving up for that 530 Watts Fortron)
Anything important to OC that I forgot:

I keep my AGP locked at 66, no point in risking frying it
 
FSB: 214
Multiplier: 10.5
All Voltage: @ default
Memory 4 settings: 2-3-2-6
Diode temp: 30c Idle - TR SP97/92mm Tornado
A7N8X Deluxe/Barton 2500

Rock solid at these settings, becomes unstable at anything much higher.
 
amd 2500+
asus a7n8x rev 2.0
FSB: 230
Multiplier: 11
Vcore voltage: 1.85
Diode temp: 7-16 load (volcano 11+\ +pump air -8)
cpu temp: 8-12
motherboard temp :5c
DDR voltage: 2.6v
Memory 4 settings: 2-3-3-7
Memory brand, size, which slots: hynrix 1024mb PC4300
chipset mode : 1.67v
PSU: codgene 300 w
AGP bus speed 66mhz
Anything important to OC that I forgot:
looking for more can get anythings over 2530mhz stable done today vcore mode set it to 2.1v but the probleme still the same anythings more than 230 fsb is instable i wiill to set chipset to 1.9v and post result hate amd locked multiplicator like my barton 2500+ she is come with locked one:(
 
I just COULDN'T get my A7N8X 2.0 & old-school 2500 Barton to run stable at anything over 2.0Gig on the 200 FSB. (gaming was the trouble)

I switched to the Abit NF7 recently and can now run easily at 2.2G even during gaming.
In time, I'll get to tweaking and see how high she'll go with the Abit. (Futuremark testing never did cause the old setup to lock, but gaming would)

**happy with my Abit. :)
 
Back