Some questions about you and your overclocking

[Mortdog]

When you say stable. Is your internet connection stable? When you hit certain speeds do you have every card inserted in your computer?.

Both my network cards gets unstable at high fsb speeds. I´m loosing the internet connection from time to time. If I use a lower fsb the connection can be kept for weeks.

I use CNet and Netgear. Do you guys know any card that is rumoured to be good for this purpose?

 

[Colin]

Stable means stable with everything installed and any software running.

Check the article archives at the front page. There is a survey with results on Ethernet cards. FWIW, my problems were solved with a $50 Intel card from Office Depot.

 

[compaq_ML530]

I've had really good luck with 3com NICs, but there's no guarantee.

 

[FRANK]

I use LINKSYS and run in excess of 140 with no problem. But then again maybe I could hit 150 with some other.

 

[Hoot]

I am running a Linksys 10/100 to connect to my Cable Modem and it is stable at 150 Mhz FSB / 38 Mhz PCI, on my KT7A.

Hoot

 

[Da Whip]

I am using the Linksys Etherfast 10/100 LAN card for a cable modem and can run 150+mgz w/o problems. I did fry a TNT 2 card, but had a Ge Force 2 on the shelf. So far so good.